Determination of the effective zero-point and the extraction of spherical nanoindentation stress–strain curves

[1]  S. Kalidindi,et al.  Analyzing indentation behavior of LaGaO3 single crystals using sharp indenters , 2008 .

[2]  S. Kalidindi,et al.  Analyzing indentation stress–strain response of LaGaO3 single crystals using spherical indenters , 2008 .

[3]  E. Arzt,et al.  Surface detection in nanoindentation of soft polymers , 2007 .

[4]  Surya R. Kalidindi,et al.  Fast computation of first-order elastic–plastic closures for polycrystalline cubic-orthorhombic microstructures , 2007 .

[5]  K. Ozasa,et al.  Simultaneous measurement of nanoprobe indentation force and photoluminescence of InGaAs/GaAs quantum dots and its simulation , 2007 .

[6]  M. Herrmann,et al.  Determination of Young's modulus and yield stress of porous low-k materials by nanoindentation , 2006 .

[7]  H. Boyen,et al.  Substrate influence in Young's modulus determination of thin films by indentation methods: Cubic boron nitride as an example , 2006 .

[8]  M. M. Chaudhri,et al.  Indentation of elastic solids with a rigid Vickers pyramidal indenter , 2006 .

[9]  Alexander J. Moseson,et al.  On the determination of spherical nanoindentation stress–strain curves , 2006 .

[10]  G. Proust,et al.  Procedures for construction of anisotropic elastic–plastic property closures for face-centered cubic polycrystals using first-order bounding relations , 2006 .

[11]  Naoki Fujisawa,et al.  Elastic modulus and stress-strain response of human enamel by nano-indentation. , 2006, Biomaterials.

[12]  H. Pelletier.  Predictive model to estimate the stress–strain curves of bulk metals using nanoindentation , 2006 .

[13]  A. C. Fischer-Cripps,et al.  Critical review of analysis and interpretation of nanoindentation test data , 2006 .

[14]  V. Fontanari,et al.  Evaluation of the stress-strain curve of metallic materials by spherical indentation , 2006 .

[15]  Bing Yang,et al.  Strain hardening and recovery in a bulk metallic glass under nanoindentation , 2006 .

[16]  Konstantinos-Dionysios Bouzakis,et al.  Indenter surface area and hardness determination by means of a FEM-supported simulation of nanoindentation , 2006 .

[17]  K. Bouzakis,et al.  Hardness determination by means of a FEM-supported simulation of nanoindentation and applications in thin hard coatings , 2005 .

[18]  F. Richter,et al.  Mechanical properties of a graded B-C-N sputtered coating with varying Young's modulus : deposition, theoretical modelling and nanoindentation , 2005 .

[19]  S. Kalidindi,et al.  Spherical Nanoindentations and Kink Bands in Ti_3SiC_2 , 2004 .

[20]  G. Pharr,et al.  Nanoindentation with spherical indenters: finite element studies of deformation in the elastic plastic transition regime , 2004 .

[21]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[22]  M. Griepentrog,et al.  Young’s modulus measurements on ultra-thin coatings , 2004 .

[23]  Johann Michler,et al.  Determination of plastic properties of metals by instrumented indentation using different sharp indenters , 2003 .

[24]  Alexei Bolshakov,et al.  Understanding nanoindentation unloading curves , 2002 .

[25]  C. Han,et al.  Transmission in irradiated hydroxyethyl methacrylate copolymer at elevated temperatures , 2002 .

[26]  Konrad Herrmann,et al.  Progress in determination of the area function of indenters used for nanoindentation , 2000 .

[27]  A. Fischer-Cripps.  A review of analysis methods for sub-micron indentation testing☆ , 2000 .

[28]  F. Richter,et al.  Determination of elastic properties of thin films by indentation measurements with a spherical indenter , 2000 .

[29]  Howard Kuhn,et al.  Mechanical testing and evaluation , 2000 .

[30]  C. Ullner.  Requirement of a robust method for the precise determination of the contact point in the depth sensing hardness test , 2000 .

[31]  Subra Suresh,et al.  DETERMINATION OF ELASTOPLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION , 1999 .

[32]  F. Kosel,et al.  New analytical procedure to determine stress-strain curve from spherical indentation data , 1998 .

[33]  Subra Suresh,et al.  A new method for estimating residual stresses by instrumented sharp indentation , 1998 .

[34]  Michael V. Swain,et al.  Mechanical property characterisation of small volumes of brittle materials with spherical tipped indenters , 1998 .

[35]  Nancy A. Burnham,et al.  Fundamentals of nanoindentation and nanotribology , 1998 .

[36]  Brian R. Lawn,et al.  Indentation stress-strain curves for “quasi-ductile” ceramics , 1996 .

[37]  Michael V. Swain,et al.  Errors associated with depth-sensing microindentation tests , 1995 .

[38]  Michael V. Swain,et al.  Determining the mechanical properties of small volumes of material from submicrometer spherical indentations , 1995 .

[39]  W. Fränzel,et al.  Recording hardness testing. Problems of measurement at small indentation depths , 1994 .

[40]  Joost J. Vlassak,et al.  Indentation modulus of elastically anisotropic half spaces , 1993 .

[41]  Michael V. Swain,et al.  A simple predictive model for spherical indentation , 1993 .

[42]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[43]  L. Anand,et al.  Crystallographic texture evolution in bulk deformation processing of FCC metals , 1992 .

[44]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[45]  W. Oliver,et al.  Hardness measurement at penetration depths as small as 20 nm , 1983 .

[46]  Brian R. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I , 1981 .

[47]  E. A. Charles,et al.  Fracture Toughness Determinations by Indentation , 1976 .

[48]  Herbert F. Wang,et al.  Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook , 1971 .

[49]  J. Willis,et al.  Hertzian contact of anisotropic bodies , 1966 .

[50]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[51]  En-Jui Lee,et al.  The Contact Problem for Viscoelastic Bodies , 1960 .

[52]  D. Tabor.  Hardness of Metals , 1937, Nature.