An Image-Based Double-Smoothing Cohesive Finite Element Framework for Particle-Reinforced Materials

In order to simulate the fracture process of particle-reinforced materials on the micro-scale, an image-based double-smoothing cohesive finite element framework is proposed in the present paper. Two separate smoothing processes are performed to reduce the noise in the digital image and eliminate the jagged elements in the finite element mesh. The main contribution of the present study is the proposed novel image-based cohesive finite element framework, and this method improved the quality of the meshes effectively. Meanwhile, the artificial resistance due to the jagged element is reduced with the double-smoothing cohesive finite element framework during the crack propagation. Therefore, the image-based double-smoothing cohesive finite element framework is significant for the simulation of fracture mechanics.

[1]  Abhishek Bhattacharyya,et al.  Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations , 2001 .

[2]  Xiaopeng Xu,et al.  Numerical simulations of dynamic crack growth along an interface , 1996 .

[3]  J. Tejchman,et al.  A three-dimensional meso-scale modelling of concrete fracture, based on cohesive elements and X-ray μCT images , 2017 .

[4]  Grégory Legrain,et al.  Image-based computational homogenization and localization: comparison between X-FEM/levelset and voxel-based approaches , 2012, Computational Mechanics.

[5]  Noboru Kikuchi,et al.  Digital image-based modeling applied to the homogenization analysis of composite materials , 1997 .

[6]  Daniel M. Wachs,et al.  Microstructural development in irradiated U-7Mo/6061 Al alloy matrix dispersion fuel , 2009 .

[7]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[8]  Juan Manuel Galíndez,et al.  Assessment of the long-term stability of cementitious barriers of radioactive waste repositories by using digital-image-based microstructure generation and reactive transport modelling , 2010 .

[9]  P. J. Rae,et al.  Quasi–static studies of the deformation and failure of β–HMX based polymer bonded explosives , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[10]  Sergio Oller,et al.  Multiscale thermo-mechanical analysis of multi-layered coatings in solar thermal applications , 2017 .

[11]  Min Zhou,et al.  A Lagrangian framework for analyzing microstructural level response of polymer-bonded explosives , 2011 .

[12]  Jacek Tejchman,et al.  Two-dimensional simulations of concrete fracture at aggregate level with cohesive elements based on X-ray μCT images , 2016 .

[13]  José Manuel García-Aznar,et al.  Micro–macro numerical modelling of bone regeneration in tissue engineering , 2008 .

[14]  Laurent Babout,et al.  Damage initiation in model metallic materials: X-ray tomography and modelling , 2004 .

[15]  Rainald Löhner,et al.  From medical images to anatomically accurate finite element grids , 2001 .

[16]  Sundararajan Natarajan,et al.  A quadtree-polygon-based scaled boundary finite element method for image-based mesoscale fracture modelling in concrete , 2019, Engineering Fracture Mechanics.

[17]  M Lengsfeld,et al.  Comparison of geometry-based and CT voxel-based finite element modelling and experimental validation. , 1998, Medical engineering & physics.

[18]  Farghalli A. Mohamed,et al.  Particulate reinforced metal matrix composites — a review , 1991, Journal of Materials Science.

[19]  Hossein Talebi,et al.  Automatic image‐based stress analysis by the scaled boundary finite element method , 2017 .

[20]  D. Bright,et al.  Two‐dimensional top hat filter for extracting spots and spheres from digital images , 1987 .

[21]  P. J. Rae,et al.  Quasi–static studies of the deformation and failure of PBX 9501 , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[22]  Nikhilesh Chawla,et al.  Microstructure-based modeling of the deformation behavior of particle reinforced metal matrix composites , 2006 .

[23]  Ch. Zhang,et al.  Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete , 2015 .

[24]  S. Ahmed,et al.  A review of particulate reinforcement theories for polymer composites , 1990 .

[25]  W. Zhou,et al.  Mesoscopic simulation of the dynamic tensile behaviour of concrete based on a rate-dependent cohesive model , 2016 .

[26]  Francisco Montero-Chacón,et al.  Mesomechanical characterization of porosity in cementitious composites by means of a voxel-based finite element model , 2014 .