Identifying Plant Part Composition of Forest Logging Residue Using Infrared Spectral Data and Linear Discriminant Analysis

As new markets, technologies and economies evolve in the low carbon bioeconomy, forest logging residue, a largely untapped renewable resource will play a vital role. The feedstock can however be variable depending on plant species and plant part component. This heterogeneity can influence the physical, chemical and thermochemical properties of the material, and thus the final yield and quality of products. Although it is challenging to control compositional variability of a batch of feedstock, it is feasible to monitor this heterogeneity and make the necessary changes in process parameters. Such a system will be a first step towards optimization, quality assurance and cost-effectiveness of processes in the emerging biofuel/chemical industry. The objective of this study was therefore to qualitatively classify forest logging residue made up of different plant parts using both near infrared spectroscopy (NIRS) and Fourier transform infrared spectroscopy (FTIRS) together with linear discriminant analysis (LDA). Forest logging residue harvested from several Pinus taeda (loblolly pine) plantations in Alabama, USA, were classified into three plant part components: clean wood, wood and bark and slash (i.e., limbs and foliage). Five-fold cross-validated linear discriminant functions had classification accuracies of over 96% for both NIRS and FTIRS based models. An extra factor/principal component (PC) was however needed to achieve this in FTIRS modeling. Analysis of factor loadings of both NIR and FTIR spectra showed that, the statistically different amount of cellulose in the three plant part components of logging residue contributed to their initial separation. This study demonstrated that NIR or FTIR spectroscopy coupled with PCA and LDA has the potential to be used as a high throughput tool in classifying the plant part makeup of a batch of forest logging residue feedstock. Thus, NIR/FTIR could be employed as a tool to rapidly probe/monitor the variability of forest biomass so that the appropriate online adjustments to parameters can be made in time to ensure process optimization and product quality.

[1]  Matt A. Sanderson,et al.  Compositional analysis of biomass feedstocks by near infrared reflectance spectroscopy , 1996 .

[2]  Frank A. Settle,et al.  Handbook of instrumental techniques for analytical chemistry , 1997 .

[3]  Melvin P. Tucker,et al.  Fourier transform infrared quantification of sugars in pretreated biomass liquors , 2000, Applied biochemistry and biotechnology.

[4]  Notburga Gierlinger,et al.  Rapid Determination of Heartwood Extractives in Larix sp. by Means of Fourier Transform near Infrared Spectroscopy , 2002 .

[5]  Kenji Ono,et al.  Determination of lignin, holocellulose, and organic solvent extractives in fresh leaf, litterfall, and organic material on forest floor using near-infrared reflectance spectroscopy , 2003, Journal of Forest Research.

[6]  Leslie H. Groom,et al.  Multivariate Modelling of Density, Strength and Stiffness from near Infrared Spectra for Mature, Juvenile and Pith Wood of Longleaf Pine (Pinus Palustris) , 2003 .

[7]  Satoru Tsuchikawa,et al.  Discriminant analysis of wood-based materials using near-infrared spectroscopy , 2003, Journal of Wood Science.

[8]  B. Stuart.  Infrared Spectroscopy , 2004, Analytical Techniques in Forensic Science.

[9]  Robert W. Sykes,et al.  Prediction of loblolly pine wood properties using transmittance near-infrared spectroscopy , 2005 .

[10]  P. D. Jones,et al.  Non-destructive estimation of Pinus taeda L tracheid morphological characteristics for samples from a wide range of sites in Georgia , 2005, Wood Science and Technology.

[11]  Charles E. Heckler,et al.  Applied Multivariate Statistical Analysis , 2005, Technometrics.

[12]  Gabriele Reich,et al.  Near-infrared spectroscopy and imaging: basic principles and pharmaceutical applications. , 2005, Advanced drug delivery reviews.

[13]  Derek Stewart,et al.  Estimation of wood density and chemical composition by means of diffuse reflectance mid-infrared Fourier transform (DRIFT-MIR) spectroscopy. , 2006, Journal of agricultural and food chemistry.

[14]  Carolyn A Raymond,et al.  Predicting Extractives, Lignin, and Cellulose Contents Using Near Infrared Spectroscopy on Solid Wood in Eucalyptus globulus , 2006 .

[15]  Richard G. Brereton,et al.  Applied Chemometrics for Scientists , 2007 .

[16]  Chi-Leung So,et al.  Rapid prediction of wood crystallinity in Pinus elliotii plantation wood by near-infrared spectroscopy , 2007, Journal of Wood Science.

[17]  Shahab Sokhansanj,et al.  Fast classification and compositional analysis of cornstover fractions using Fourier transform near-infrared techniques. , 2008, Bioresource technology.

[18]  C. Bosch Ojeda,et al.  Process Analytical Chemistry: Applications of Near Infrared Spectrometry in Environmental and Food Analysis: An Overview , 2008 .

[19]  Hyun-Woo Cho,et al.  Enhanced discrimination and calibration of biomass NIR spectral data using non-linear kernel methods. , 2008, Bioresource technology.

[20]  Andrea Polle,et al.  FTIR spectroscopy, chemical and histochemical characterisation of wood and lignin of five tropical timber wood species of the family of Dipterocarpaceae , 2010, Wood Science and Technology.

[21]  Edward Hodgson,et al.  Measurement of key compositional parameters in two species of energy grass by Fourier transform infrared spectroscopy. , 2009, Bioresource technology.

[22]  Peter Filzmoser,et al.  Introduction to Multivariate Statistical Analysis in Chemometrics , 2009 .

[23]  Phani Adapa,et al.  Potential Applications of Infrared and Raman Spectromicroscopy for Agricultural Biomass , 2009 .

[24]  Roger Meder,et al.  Developing and evaluating a multisite and multispecies NIR calibration for the prediction of Kraft pulp yield in eucalypts , 2009 .

[25]  Bernhard Lendl,et al.  Differentiation of walnut wood species and steam treatment using ATR-FTIR and partial least squares discriminant analysis (PLS-DA) , 2010, Analytical and bioanalytical chemistry.

[26]  Jun Yao,et al.  Qualitative and quantitative analysis of wood samples by Fourier transform infrared spectroscopy and multivariate analysis. , 2010 .

[27]  Thomas L. Eberhardt,et al.  Chemical and Calorific Characterisation of Longleaf Pine Using near Infrared Spectroscopy , 2010 .

[28]  Kevin McDonnell,et al.  Prediction of moisture, calorific value, ash and carbon content of two dedicated bioenergy crops using near-infrared spectroscopy. , 2011, Bioresource technology.

[29]  O. Fasina,et al.  ASSESSMENT OF PINE BIOMASS DENSITY THROUGH MID-INFRARED SPECTROSCOPY AND MULTIVARIATE MODELING , 2011 .

[30]  Karin Fackler,et al.  A Review of Band Assignments in near Infrared Spectra of Wood and Wood Components , 2011 .

[31]  D. Sekyere,et al.  Rapid Prediction of Extractives and Polyphenolic Contents in Pinus caribaea Bark Using Near Infrared Reflectance Spectroscopy , 2011 .

[32]  Gerd Wegener,et al.  Classification of thermally modified wood by FT-NIR spectroscopy and SIMCA , 2012, Wood Science and Technology.

[33]  Thomas L. Eberhardt,et al.  A Spectroscopic study on the fuel value of softwoods in relation to chemical composition , 2012 .

[34]  Keith D. Shepherd,et al.  Limitations to Use of Infrared Spectroscopy for Rapid Determination of Carbon-Nitrogen and Wood Density for Tropical Species , 2013 .

[35]  Reza Ehsani,et al.  Comparison of visible-near infrared and mid-infrared spectroscopy for classification of Huanglongbing and Citrus Canker infected leaves , 2013 .

[36]  Jose Gonzalez-Rodriguez,et al.  A specific case in the classification of woods by FTIR and chemometric: discrimination of Fagales from Malpighiales , 2014, Cellulose.

[37]  Sushil Adhikari,et al.  Modeling for proximate analysis and heating value of torrefied biomass with vibration spectroscopy. , 2013, Bioresource technology.

[38]  Seema Singh,et al.  High-throughput prediction of eucalypt lignin syringyl/guaiacyl content using multivariate analysis: a comparison between mid-infrared, near-infrared, and Raman spectroscopies for model development , 2014, Biotechnology for Biofuels.

[39]  Philip J. Harris,et al.  Using NIR and ATR-FTIR spectroscopy to rapidly detect compression wood in Pinus radiata , 2014 .

[40]  Brian K. Via,et al.  Non-Destructive Prediction of the Properties of Forest Biomass for Chemical and Bioenergy Applications Using near Infrared Spectroscopy , 2015 .

[41]  Kang Li,et al.  Preliminary Investigation into the Identification of Wood Species from Different Locations by Near Infrared Spectroscopy , 2015 .

[42]  E. White.  Woody Biomass for Bioenergy and Biofuels in the United States- A Briefing Paper , 2015 .

[43]  Brian K. Via,et al.  Screening Pinus taeda (loblolly pine) families for physical and mechanical properties using vibrational spectroscopy , 2016 .

[44]  Z. Jiang,et al.  Infrared Spectroscopy , 2022 .