Development of facilities and methods for the metrological characterization of distributed temperature sensing systems based on optical fibres

Raman distributed temperature sensing (DTS) technologies are currently under evaluation by the nuclear and hydraulic industries as it may bring promising alternatives to classical measurement techniques. The reliability of the DTS measurements, as well as the traceability to the temperature standards, must be ensured throughout the entire period of monitoring (typically over a few tens of years). In order to achieve this goal, one key task consists in the verification of the performances claimed by the DTS devices manufacturers. Thus, the metrological performances and characteristics of the DTS devices, such as their limitations and accuracies, as well as the practical aspects of systems implemented on site should be evaluated step by step. This paper describes the dedicated facilities which have been developed at LNE in order to evaluate and to qualify DTS devices for very demanding applications. A first case study performed on one specific DTS device is detailed. A systematic bias has been observed among others on the spatial resolution. The DTS response to a temperature variation step over 1 m (spatial resolution typically claimed by the manufacturers) of sensing optical fibre corresponds indeed to only 90% of the temperature step magnitude, whereas the full DTS response is obtained in fact for 10 m (the practical spatial resolution) of sensing optical fibre solicited by this temperature step variation.

[1]  Antonio Quintela Incera,et al.  Fiber Optic Sensors in Structural Health Monitoring , 2011, Journal of Lightwave Technology.

[2]  Susan C. Steele-Dunne,et al.  Double-Ended Calibration of Fiber-Optic Raman Spectra Distributed Temperature Sensing Data , 2012, Sensors.

[3]  Frédéric Taillade,et al.  High temperature measurements in irradiated environment using Raman fiber optics distributed temperature sensing , 2016, Photonics Europe.

[4]  Alan J. Rogers.  Distributed optical fiber sensing , 1991, Other Conferences.

[5]  A. Yablon.  Optical and mechanical effects of frozen-in stresses and strains in optical fibers , 2004, IEEE Journal of Selected Topics in Quantum Electronics.

[6]  J. N. Ross,et al.  Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector , 1985 .

[7]  Youcef Ouerdane,et al.  Industrial Qualification Process for Optical Fibers Distributed Strain and Temperature Sensing in Nuclear Waste Repositories , 2012, J. Sensors.

[8]  Francis Berghmans,et al.  Guidelines for the characterization and use of fibre optic sensors: basic definitions and a proposed standard for FBG-based strain sensors , 2009, International Conference on Optical Fibre Sensors.

[9]  Christine Connolly.  Fibre‐optic‐based sensors bring new capabilities to structural monitoring , 2006 .

[10]  P. Krippner,et al.  Distributed Temperature Sensing: Review of Technology and Applications , 2012, IEEE Sensors Journal.

[11]  Frédéric Taillade,et al.  Truly Distributed Optical Fiber Sensors for Structural Health Monitoring: From the Telecommunication Optical Fiber Drawling Tower to Water Leakage Detection in Dikes and Concrete Structure Strain Monitoring , 2010 .

[12]  H. Preston‐Thomas,et al.  The International Temperature Scale of 1990 (ITS-90) , 1990 .

[13]  Guy D'Urso,et al.  Monitoring and early detection of internal erosion: Distributed sensing and processing , 2014 .

[14]  A J Rogers,et al.  Polarization-optical time domain reflectometry: a technique for the measurement of field distributions. , 1981, Applied optics.

[15]  M. P. Gold,et al.  Distributed temperature sensing in solid-core fibres , 1985 .

[16]  D. Inaudi,et al.  LONG-RANGE PIPELINE MONITORING BY DISTRIBUTED FIBER OPTIC SENSING , 2010 .

[17]  A. E. Ringwood,et al.  Disposal of high-level nuclear wastes: a geological perspective , 1985, Mineralogical Magazine.

[18]  John S. Selker,et al.  Environmental temperature sensing using Raman spectra DTS fiber‐optic methods , 2009 .

[19]  Tsutomu Yamate.  Fiber-optic sensors for the exploration of oil and gas , 2009, 2009 14th OptoElectronics and Communications Conference.

[20]  Takashi Ono,et al.  A fire detection system using optical fibres for utility tunnels , 1997 .

[21]  A. Kersey.  A Review of Recent Developments in Fiber Optic Sensor Technology , 1996 .

[22]  缪巍.  THESE de DOCTORAT de l’UNIVERSITE PARIS VI , 2010 .

[23]  Gerald Meltz,et al.  Fiber Optic Bragg Grating Sensors , 1990, Other Conferences.

[24]  S. Delepine-Lesoille,et al.  On-Line Characterization of Gamma Radiation Effects on Single-Ended Raman Based Distributed Fiber Optic Sensor , 2016, IEEE Transactions on Nuclear Science.

[25]  Alan J. Rogers,et al.  Distributed optical-fibre sensing , 1999 .

[26]  T. Gogolla,et al.  Spontaneous Raman scattering in optical fibers with modulated probe light for distributed temperature Raman remote sensing , 1999 .

[27]  Jean-Marie Henault.  Approche méthodologique pour l’évaluation des performances et de la durabilité des systèmes de mesure répartie de déformation : application à un câble à fibre optique noyé dans le béton , 2013 .

[28]  Zhang Yinping,et al.  A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials , 1999 .

[29]  H. Kee,et al.  All-fiber system for simultaneous interrogation of distributed strain and temperature sensing by spontaneous Brillouin scattering. , 2000, Optics letters.

[30]  F. Berghmans,et al.  Radiation-tolerant Raman distributed temperature monitoring system for large nuclear infrastructures , 2005, IEEE Transactions on Nuclear Science.

[31]  Renaud Gabet,et al.  Distributed Optical Fibre Sensors for Structural Health Monitoring: Upcoming Challenges , 2009 .

[32]  Pierre Stephan,et al.  Ageing management of concrete structure: Assessment of EDF methodology in comparison with SHM and AIEA guides , 2012 .

[33]  George Albert Brown,et al.  Distributed temperature sensing (DTS) to characterize the performance of producing oil wells , 2000, SPIE Optics East.

[34]  Yun-Jiang Rao,et al.  Recent progress in applications of in-fibre Bragg grating sensors , 1999 .

[35]  Marc Quiertant,et al.  Qualification of a truly distributed fiber optic technique for strain and temperature measurements in concrete structures , 2010 .

[36]  R. Narayanaswarny,et al.  Optical sensors , 2005, 2005 Asian Conference on Sensors and the International Conference on New Techniques in Pharmaceutical and Biomedical Research.

[37]  Yahei Koyamada,et al.  Brillouin optical-fiber time domain reflectometry , 1993 .