Effect of nano Al2O3 additions on the microstructure, hardness and shear strength of eutectic Sn-9Zn solder on Au/Ni metallized Cu pads

Abstract Nano-sized, nonreacting, noncoarsening Al 2 O 3 particles have been incorporated into eutectic Sn–Zn solder alloys to investigate the microstructure, hardness and shear strength on Au/Ni metallized Cu pads ball grid array substrate (BGA). In the plain Sn–Zn solder joint and solder joints containing Al 2 O 3 nano-particles, a scallop-shaped AuZn 3 intermetallic compound layer was found at the interfaces. In the solder joints containing Al 2 O 3 nano-particles, a fine acicular-shaped Zn-rich phase and Al 2 O 3 nano-particles were found to be homogeneously distributed in the β-Sn matrix. The shear strengths and hardness of solder joints containing higher percentage of Al 2 O 3 nano-particles exhibited consistently higher value than those of plain solder joint and solder joints containing lower percentage of Al 2 O 3 nano-particles due to control the fine microstructure as well as homogeneous distribution of Al 2 O 3 nano-particles acting as a second phase dispersion strengthening mechanism. The fracture surfaces of plain Sn–Zn solder joints exhibited a brittle fracture mode with smooth surfaces while Sn–Zn solder joints containing Al 2 O 3 nano-particles showed a typical ductile failure with very rough dimpled surfaces.

[1]  J. Sun,et al.  Microstructure and Strengthening Mechanism of Oxide Lanthanum Dispersion Strengthened Molybdenum Alloy , 2004 .

[2]  V. Kripesh,et al.  Influence of single-wall carbon nanotube addition on the microstructural and tensile properties of Sn–Pb solder alloy , 2008 .

[3]  T. S. Srivatsan,et al.  Influence of titanium dioxide nanopowder addition on microstructural development and hardness of tin–lead solder , 2003 .

[4]  M. Tan,et al.  Powder metal matrix composites: selection and processing , 1998 .

[5]  Seung-Boo Jung,et al.  Solder joint reliability evaluation of Sn–Zn/Au/Ni/Cu ball-grid-array package during aging , 2007 .

[6]  J. W. Meredith,et al.  Microelectronics reliability , 1988, IEEE Region 5 Conference, 1988: 'Spanning the Peaks of Electrotechnology'.

[7]  Gautam Ghosh,et al.  Interfacial reaction between multicomponent lead-free solders and Ag, Cu, Ni, and Pd substrates , 2004 .

[8]  Kozo Fujiwara,et al.  Control of compound forming reaction at the interface between SnZn solder and Cu substrate , 2005 .

[9]  Y. C. Chan,et al.  Investigations of interfacial reactions of Sn–Zn based and Sn–Ag–Cu lead-free solder alloys as replacement for Sn–Pb solder , 2005 .

[10]  Y. Yi,et al.  Thermal Oxidation Study on Lead‐free Solders of Sn‐Ag‐Cu and Sn‐Ag‐Cu‐Ge , 2006 .

[11]  Tirumalai S. Srivatsan,et al.  The influence of copper nanopowders on microstructure and hardness of lead-tin solder , 2002 .

[12]  Manoj Gupta,et al.  High Strength Lead‐Free Composite Solder Materials using Nano Al2O3 as Reinforcement , 2005 .

[13]  M. Rettenmayr,et al.  High Melting Pb‐Free Solder Alloys for Die‐Attach Applications , 2005 .

[14]  Jin Yu,et al.  Effects of residual S on Kirkendall void formation at Cu/Sn–3.5Ag solder joints , 2008 .

[15]  Y. C. Chan,et al.  Interfacial microstructure and shear strength of Ag nano particle doped Sn-9Zn solder in ball grid array packages , 2009, Microelectron. Reliab..

[16]  King-Ning Tu,et al.  Ductile-to-brittle transition in Sn–Zn solder joints measured by impact test , 2004 .

[17]  Sungho Jin,et al.  New, creep-resistant, low melting point solders with ultrafine oxide dispersions , 1998 .

[18]  Haoran Ma,et al.  Microstructural evolution of Sn–9Zn–3Bi solder/Cu joint during long-term aging at 170 °C , 2004 .

[19]  M. J. Rizvi,et al.  Effect of 9 wt.% in addition to Sn3.5Ag0.5Cu solder on the interfacial reaction with the Au/NiP metallization on Cu pads , 2005 .

[20]  Yang Tian,et al.  Strengthening effects of ZrO2 nanoparticles on the microstructure and microhardness of Sn-3.5Ag lead-free solder , 2006 .

[21]  Y. Chan,et al.  Effect of nano Ni additions on the structure and properties of Sn-9Zn and Sn-8Sn-3Bi solder in ball grid array packages , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[22]  Meng Zhang,et al.  On the advantages of using a hypoeutectic Sn–Zn as lead-free solder material , 2007 .

[23]  Pei Yao,et al.  Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu–xNi composite solder joints on electrolytic Ni/Au metallized substrate , 2008 .

[24]  Fu Guo,et al.  Processing and aging characteristics of eutectic Sn-3.5Ag solder reinforced with mechanically incorporated Ni particles , 2001 .