An electroactive conducting polymer actuator based on NBR/RTIL solid polymer electrolyte

This paper reports the fabrication of a dry-type conducting polymer actuator using nitrile rubber (NBR) as the base material in a solid polymer electrolyte. The conducting polymer, poly(3,4-ethylenedioxythiophene) (PEDOT), was synthesized on the surface of the NBR layer by using a chemical oxidation polymerization technique. Room-temperature ionic liquids (RTIL) based on imidazolium salts, e.g. 1-butyl-3-methyl imidazolium X (where X = BF4−, PF6−, (CF3SO2)2N−), were absorbed into the composite film. The compatibility between the ionic liquids and the NBR polymer was confirmed by DMA. The effect of the anion size of the ionic liquids on the displacement of the actuator was examined. The displacement increased with increasing anion size of the ionic liquids. The cyclic voltammetry responses and the redox switching dynamics of the actuators were examined in different ionic liquids.

[1]  Ian W. Hunter,et al.  Encapsulated polypyrrole actuators , 1999 .

[2]  R. Baughman.  Conducting polymer artificial muscles , 1996 .

[3]  H. Randriamahazaka,et al.  Nucleation and growth of poly(3,4-ethylenedioxythiophene) in acetonitrile on platinum under potentiostatic conditions , 1999 .

[4]  Y. Fung,et al.  Room temperature molten salt as medium for lithium battery , 1999 .

[5]  M. Grätzel,et al.  Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts. , 1996, Inorganic chemistry.

[6]  D. Macfarlane,et al.  Novel high salt content polymer electrolytes based on high Tg polymers , 2000 .

[7]  S. Sewa,et al.  Highly Stretchable and Powerful Polypyrrole Linear Actuators , 2003 .

[8]  W. Takashima,et al.  Characteristics of soft actuators based on polypyrrole films , 2001 .

[9]  J. Goldman,et al.  Electrochemical properties of imidazolium salt electrolytes for electrochemical capacitor applications , 1999 .

[10]  J. Heinze,et al.  Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes , 1994 .

[11]  H. Ohno.  Ion conductive characteristics of ionic liquids prepared by neutralization of alkylimidazoles , 2002 .

[12]  T F Otero,et al.  Soft and wet conducting polymers for artificial muscles. , 1998, Advanced materials.

[13]  Bruno Scrosati,et al.  Applications of electroactive polymers , 1993 .

[14]  C. Plesse,et al.  Long-life air working conducting semi-IPN/ionic liquid based actuator , 2004 .

[15]  Joan Fuller,et al.  The room temperature ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate : Electrochemical couples and physical properties , 1997 .

[16]  M. Ondrechen,et al.  The Intrinsic Anodic Stability of Several Anions Comprising Solvent‐Free Ionic Liquids , 1996 .

[17]  R. T. Carlin,et al.  Electrodeposition of Palladium and Adsorption of Palladium Chloride onto Solid Electrodes from Room Temperature Molten Salts , 1994 .