Signal-to-noise ratio of pseudo-random noise continuous wave backscatter lidar with analog detection

Backscatter lidars are useful tools for range determination in various applications, particularly if they provide compact and robust set-ups with suitable light sources, efficient sensors and adequate signal processing. A promising perspective to achieve such requirements is offered by the Pseudo-Random Noise continuous wave (PRN cw) lidar technique, employing cw laser diodes as transmitter. Here the Signal-to-Noise ratio (SNR) of such lidar will be investigated in detail for the following cases: power (amplitude) modulation of the transmitted laser beam and analogue detection by an avalanche photodiode, surface detection. The SNR is calculated numerically, allowing selection of the factors limiting the lidar detection under various environmental conditions. A set of various measurements, obtained with a PRN cw lidar, employing a diode laser in the near IR spectral range and an avalanche photodiode will be presented. The results from the analytical and numerical study are compared with the experimental results. Various applications for the PRN cw lidar will be examined and critical factors influencing its detection performances discussed. Finally an outlook is provided for possible applications of such a lidar in specific atmospheric and surface measurements.

[1]  A Taflove,et al.  Signal-to-noise ratio in direct-detection mid-infrared Random-Modulation Continuous-Wave lidar in the presence of colored additive noise. , 2001, Optics express.

[2]  Allen Taflove,et al.  Superior signal-to-noise ratio of a new AA1 sequence for random-modulation continuous-wave lidar. , 2004, Optics letters.

[3]  A. Jelalian.  Laser radar systems , 1980 .

[4]  Edward A. Watson,et al.  Required energy for a laser radar system incorporating a fiber amplifier or an avalanche photodiode. , 1995, Applied optics.

[5]  Badih John Rask,et al.  Range Resolved, 3-D Optical Remote Sensing of Atmospheric Winds Using a CW Lidar , 1997 .

[6]  James B. Abshire,et al.  Altimetry and lidar using AlGaAs lasers modulated with pseudo-random codes , 1992 .

[7]  Valentin Mitev,et al.  Computer model study of pseudorandom noise modulation continuous-wave (PRN-cw) backscatter lidar , 1995, Other Conferences.

[8]  N. Takeuchi,et al.  Random modulation cw lidar. , 1983, Applied optics.

[9]  C. Nagasawa,et al.  Random modulation cw lidar using new random sequence. , 1990, Applied optics.

[10]  R. Measures.  Laser remote sensing : fundamentals and applications , 1984 .

[11]  Valentin Mitev,et al.  Development of a pseudorandom noise modulation, continuous-wave (PRN-cw) total backscatter lidar , 1995, Other Conferences.

[12]  Allen Taflove,et al.  Figure of merit and fundamental range limitations in surface sensing direct-detection mid-infrared random-modulation continuous-wave lidar , 2002, SPIE Remote Sensing.

[13]  Y Emery,et al.  Use of the A1- and the A2-sequences to modulate continuous-wave pseudorandom noise lidar. , 1998, Applied optics.

[14]  N. Takeuchi,et al.  Diode-laser random-modulation cw lidar. , 1986, Applied optics.

[15]  J L Machol.  Comparison of the pseudorandom noise code and pulsed direct-detection lidars for atmospheric probing. , 1997, Applied optics.

[16]  Valentin Mitev,et al.  PRN-cw Backscatter Lidar Measurements with a Powerful Narrowband Diode Laser , 1997 .

[17]  Deborah L. Sivco,et al.  Quantitative gas sensing by backscatter-absorption measurements of a pseudorandom code modulated λ ∼ 8-µm quantum cascade laser , 2000 .

[18]  C S Gardner,et al.  Satellite laser ranging using pseudonoise code modulated laser diodes. , 1988, Applied optics.