Tuning C–C sp2/sp3 ratio of DLC films in FCVA system for biomedical application

[1]  V. Trava-Airoldi,et al.  High antibacterial properties of DLC film doped with nanodiamond , 2019, Surface and Coatings Technology.

[2]  Kengo Sakurai,et al.  Evaluation of sliding properties and durability of DLC coating for medical devices , 2019, Diamond and Related Materials.

[3]  Aiying Wang,et al.  Bactericidal abilities and in vitro properties of diamond-like carbon films deposited onto MAO-treated titanium , 2019, Materials Letters.

[4]  T. Mohsenpour,et al.  Controllable synthesizing DLC nano structures as a super hydrophobic layer on cotton fabric using a low-cost ethanol electrospray-assisted atmospheric plasma jet , 2018, Nanotechnology.

[5]  Chao Yang,et al.  Effect of graphite target power density on tribological properties of graphite-like carbon films , 2018 .

[6]  A. Hatta,et al.  Pulsed DC plasma CVD system for the deposition of DLC films , 2018 .

[7]  W. Dai,et al.  Influence of frequency and C2H2 flow on growth properties of diamond-like carbon coatings with AlCrSi co-doping deposited using a reactive high power impulse magnetron sputtering , 2018 .

[8]  Qiuhe Wang.  Structure and Electrochemical Properties of Nitrogen Doped Diamond-like Carbon Film Synthesized by Low Temperature Neutral Beam Enhanced Chemical Vapor Deposition , 2018 .

[9]  Yang Liu,et al.  Hydroxyapatite/mesoporous silica coated gold nanorods with improved degradability as a multi-responsive drug delivery platform. , 2018, Materials science & engineering. C, Materials for biological applications.

[10]  Qiaoqin Yang,et al.  Adhesion enhancement of DLC on CoCrMo alloy by diamond and nitrogen incorporation for wear resistant applications , 2017 .

[11]  P. Soares,et al.  Tribocorrosion behavior of DLC-coated Ti-6Al-4V alloy deposited by PIID and PEMS + PIID techniques for biomedical applications , 2017 .

[12]  Hua Li,et al.  Room-temperature deposition of hydroxyapatite/antibiotic composite coatings by vacuum cold spraying for antibacterial applications , 2017 .

[13]  A. Lobo,et al.  Biomineralized diamond-like carbon films with incorporated titanium dioxide nanoparticles improved bioactivity properties and reduced biofilm formation. , 2017, Materials science & engineering. C, Materials for biological applications.

[14]  A. Sobczyk-Guzenda,et al.  Mechanical properties, chemical analysis and evaluation of antimicrobial response of Si-DLC coatings fabricated on AISI 316 LVM substrate by a multi-target DC-RF magnetron sputtering method for potential biomedical applications , 2017 .

[15]  T. Chen,et al.  Achieving low friction and wear under various humidity conditions by co-doping nitrogen and silicon into diamond-like carbon films , 2017 .

[16]  B. Scholz,et al.  Low-energy electron-beam modification of DLC coatings reduces cell count while maintaining biocompatibility , 2017 .

[17]  Zhiyong Wang,et al.  Effect of various nitrogen flow ratios on the optical properties of (Hf:N)-DLC films prepared by reactive magnetron sputtering , 2017 .

[18]  N. Huang,et al.  In vitro cytotoxicity evaluation of nano-carbon particles with different sp2/sp3 ratios. , 2017, Materials science & engineering. C, Materials for biological applications.

[19]  Junyan Zhang,et al.  Graphene nano scrolls responding to superlow friction of amorphous carbon , 2017 .

[20]  K. Ganesan,et al.  The role of substrate bias and nitrogen doping on the structural evolution and local elastic modulus of diamond-like carbon films , 2017, 1703.08990.

[21]  N. Zhang,et al.  Assessments of the relation between the degree of order of the ultrafast laser deposited carbon film and the features of the Raman spectrum's D band , 2017 .

[22]  Bing Zhou,et al.  Structure and optical properties of Cu-DLC composite films deposited by cathode arc with double-excitation source , 2016 .

[23]  Chehung Wei,et al.  The effect of hydrogen and acetylene mixing ratios on the surface, mechanical and biocompatible properties of diamond-like carbon films , 2016 .

[24]  Cynthia S Crowson,et al.  Prevalence of Total Hip and Knee Replacement in the United States. , 2015, The Journal of bone and joint surgery. American volume.

[25]  B. Liu,et al.  In vitro evaluation of the tribological response of Mo-doped graphite-like carbon film in different biological media. , 2015, ACS applied materials & interfaces.

[26]  A. Lobo,et al.  Diamond-like carbon electrochemical corrosion resistance by addition of nanocrystalline diamond particles for biomedical applications , 2014 .

[27]  M. Gentleman,et al.  The role of surface free energy in osteoblast–biomaterial interactions , 2014 .

[28]  H. Kavak,et al.  The effect of nitrogen incorporation in DLC films deposited by ECR Microwave Plasma CVD , 2014 .

[29]  D. Bootkul,et al.  Nitrogen doping for adhesion improvement of DLC film deposited on Si substrate by Filtered Cathodic Vacuum Arc (FCVA) technique , 2014 .

[30]  D. Su,et al.  Nanocarbons for the development of advanced catalysts. , 2013, Chemical reviews.

[31]  A. Greentree,et al.  Diamond as a scaffold for bone growth , 2013, Journal of Materials Science: Materials in Medicine.

[32]  Chii-Ruey Lin,et al.  Concurrent improvement in biocompatibility and bioinertness of diamond-like carbon films with nitrogen doping. , 2012, Journal of biomedical materials research. Part A.

[33]  P. Dieppe,et al.  Risk of cancer in first seven years after metal-on-metal hip replacement compared with other bearings and general population: linkage study between the National Joint Registry of England and Wales and hospital episode statistics , 2012, BMJ : British Medical Journal.

[34]  S. Kurtz,et al.  The Latest Lessons Learned from Retrieval Analyses of Ultra-High Molecular Weight Polyethylene, Metal-on-Metal, and Alternative Bearing Total Disc Replacements. , 2012, Seminars in spine surgery.

[35]  S. Dorozhkin.  Calcium orthophosphates , 2011, Biomatter.

[36]  Hideo Watanabe,et al.  Evaluation of surfactant-free stabilized vapor grown carbon fibers with ζ- potential and Raman spectroscopy , 2011 .

[37]  James Alastair McLaughlin,et al.  Sp3 content in ta-C films vs pulse bias width to the substrate: A correlative structural analysis , 2009 .

[38]  D. Jia,et al.  Structure and apatite formation of microarc oxidized TiO2-based films before and after alkali-treatment by various alkali concentrations , 2008 .

[39]  B. Tay,et al.  Review of metal oxide films deposited by filtered cathodic vacuum arc technique , 2006 .

[40]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[41]  F. Simon,et al.  Diamond-like carbon coatings with Ca-O-incorporation for improved biological acceptance , 2002, Analytical and bioanalytical chemistry.

[42]  B. Tay,et al.  Transport of vacuum arc plasma through an off-plane double bend filtering duct , 1999 .

[43]  P. Pimienta,et al.  Mechanical Properties , 2018, Bainite in Steels.