p-Type polymer-hybridized high-performance piezoelectric nanogenerators.

Enhancing the output power of a nanogenerator is essential in applications as a sustainable power source for wireless sensors and microelectronics. We report here a novel approach that greatly enhances piezoelectric power generation by introducing a p-type polymer layer on a piezoelectric semiconducting thin film. Holes at the film surface greatly reduce the piezoelectric potential screening effect caused by free electrons in a piezoelectric semiconducting material. Furthermore, additional carriers from a conducting polymer and a shift in the Fermi level help in increasing the power output. Poly(3-hexylthiophene) (P3HT) was used as a p-type polymer on piezoelectric semiconducting zinc oxide (ZnO) thin film, and phenyl-C(61)-butyric acid methyl ester (PCBM) was added to P3HT to improve carrier transport. The ZnO/P3HT:PCBM-assembled piezoelectric power generator demonstrated 18-fold enhancement in the output voltage and tripled the current, relative to a power generator with ZnO only at a strain of 0.068%. The overall output power density exceeded 0.88 W/cm(3), and the average power conversion efficiency was up to 18%. This high power generation enabled red, green, and blue light-emitting diodes to turn on after only tens of times bending the generator. This approach offers a breakthrough in realizing a high-performance flexible piezoelectric energy harvester for self-powered electronics.

[1]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[2]  Yong Ding,et al.  Piezoelectric nanogenerator using CdS nanowires , 2008 .

[3]  Guang Zhu,et al.  Flexible high-output nanogenerator based on lateral ZnO nanowire array. , 2010, Nano letters.

[4]  Jae-Young Choi,et al.  Fully Rollable Transparent Nanogenerators Based on Graphene Electrodes , 2010, Advanced materials.

[5]  Liwei Lin,et al.  Direct-write piezoelectric polymeric nanogenerator with high energy conversion efficiency. , 2010, Nano letters.

[6]  Geon-Tae Hwang,et al.  Piezoelectric BaTiO₃ thin film nanogenerator on plastic substrates. , 2010, Nano letters.

[7]  Zhong Lin Wang,et al.  Hybrid nanogenerator for concurrently harvesting biomechanical and biochemical energy. , 2010, ACS nano.

[8]  Hany Aziz,et al.  Degradation Phenomena in Small-Molecule Organic Light-Emitting Devices , 2004 .

[9]  Zhenqiang Ma,et al.  Interface engineering by piezoelectric potential in ZnO-based photoelectrochemical anode. , 2011, Nano letters.

[10]  Kyungsuk Yum,et al.  Voltage generation from individual BaTiO(3) nanowires under periodic tensile mechanical load. , 2007, Nano letters.

[11]  Zhiyuan Gao,et al.  GaN nanowire arrays for high-output nanogenerators. , 2010, Journal of the American Chemical Society.

[12]  K. Lee,et al.  Paper-based piezoelectric nanogenerators with high thermal stability. , 2011, Small.

[13]  Xu,et al.  Degradation mechanism of small molecule-based organic light-emitting devices , 1999, Science.

[14]  Yong Shi,et al.  Potential measurement from a single lead ziroconate titanate nanofiber using a nanomanipulator , 2009 .

[15]  Young-Jun Park,et al.  Sound‐Driven Piezoelectric Nanowire‐Based Nanogenerators , 2010, Advanced materials.

[16]  Posternak,et al.  Ab initio study of piezoelectricity and spontaneous polarization in ZnO. , 1994, Physical review. B, Condensed matter.

[17]  Han‐Ki Kim,et al.  Charge‐Generating Mode Control in High‐Performance Transparent Flexible Piezoelectric Nanogenerators , 2011 .

[18]  Xi Chen,et al.  1.6 V nanogenerator for mechanical energy harvesting using PZT nanofibers. , 2010, Nano letters.

[19]  Zhong Lin Wang,et al.  Direct-Current Nanogenerator Driven by Ultrasonic Waves , 2007, Science.

[20]  Zhong Lin Wang,et al.  Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays , 2006, Science.

[21]  Zhong-Lin Wang.  Towards Self‐Powered Nanosystems: From Nanogenerators to Nanopiezotronics , 2008 .

[22]  Li-Wei Tu,et al.  Generation of electricity in GaN nanorods induced by piezoelectric effect , 2007 .

[23]  Michael C. McAlpine,et al.  Piezoelectric ribbons printed onto rubber for flexible energy conversion. , 2010, Nano letters.

[24]  Seung Jin Chae,et al.  Controlled growth of semiconducting nanowire, nanowall, and hybrid nanostructures on graphene for piezoelectric nanogenerators. , 2011, ACS nano.

[25]  Sang‐Woo Kim,et al.  Mechanically Powered Transparent Flexible Charge‐Generating Nanodevices with Piezoelectric ZnO Nanorods , 2009 .

[26]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.