Force modeling in drilling withapplication to burr minimization

[1]  Kornel Ehmann,et al.  Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces , 2005 .

[2]  L. Kachanov,et al.  Foundations Of The Theory Of Plasticity , 1971 .

[3]  Claudiu Bisu,et al.  3D FEM analysis of cutting processes , 2010 .

[4]  Sangkee Min,et al.  FINITE ELEMENT MODELING OF BURR FORMATION IN METAL CUTTING , 2001 .

[5]  Ozden Isbilir,et al.  Finite element analysis of drilling of titanium alloy , 2011 .

[6]  E.J.A. Armarego,et al.  A GENERIC MECHANICS OF CUTTING APPROACH TO PREDICTIVE TECHNOLOGICAL PERFORMANCE MODELING OF THE WIDE SPECTRUM OF MACHINING OPERATIONS , 1998 .

[7]  V. N. Gaitonde,et al.  Genetic algorithm-based burr size minimization in drilling of AISI 316L stainless steel , 2008 .

[8]  S. S. Pande,et al.  Investigations on reducing burr formation in drilling , 1986 .

[9]  Sung-Lim Ko,et al.  Burr minimizing scheme in drilling , 2003 .

[10]  Masayoshi Tomizuka,et al.  Intelligent Modeling of Thrust Force in Drilling Process , 2006 .

[11]  Sung-Lim Ko,et al.  Development of Drill Geometry for Burr Minimization In Drilling , 2003 .

[12]  Richard E. DeVor,et al.  Chisel edge and cutting lip shape optimization for improved twist drill point design , 2005 .

[13]  S. M. Mahdavian,et al.  Experimental studies of step drills and establishment of empirical equations for the drilling process , 2005 .

[14]  Richard E. DeVor,et al.  DEVELOPMENT OF MECHANISTIC MODELS FOR THE PREDICTION OF MACHINING PERFORMANCE: MODEL BUILDING METHODOLOGY , 1998 .

[15]  C. Hellstern.  Investigation of interlayer burr formation in the drilling of stacked aluminum sheets , 2009 .

[16]  Sung-Lim Ko,et al.  Analysis of burr formation in drilling with a new-concept drill , 2001 .

[17]  David Dornfeld,et al.  Development of an Analytical Model for Drilling Burr Formation in Ductile Materials , 2002 .

[18]  Pradeep Kumar,et al.  Experimental investigations to optimise step drill geometry for burr minimisation in drilling using regression model , 2010, Int. J. Manuf. Technol. Manag..

[19]  João Paulo Davim,et al.  A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling , 2008 .

[20]  Aitzol Lamikiz,et al.  Mechanistic model for drills with double point-angle edges , 2009 .

[21]  K. Marusich,et al.  Validation of Finite Element Modeling of Drilling Processes with Solid Tooling in Metals , 2011 .

[22]  E. Kilickap,et al.  Selection of Optimum Drilling Parameters on Burr Height Using Response Surface Methodology and Genetic Algorithm in Drilling of AISI 304 Stainless Steel , 2010 .