Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V

Abstract A volumetric heat source is used in numerical modeling of selective laser melting (SLM) of Ti6Al4V powder. Single track and multi-track SLM simulations are performed by varying the two key process parameters-laser power and scan speed. The model is validated with the published experimental results for melt pool shape, size and temperature. The predictions are in good agreement with the experiments at low to medium energy density. The validated model is used for investigating the thermo-fluidic transport during SLM of Ti6Al4V and examining the dependence of the melt pool characteristics on the process parameters. As-solidified porosity is calculated numerically for the multi-track simulations and its formation is delineated with the transport phenomena. The predicted porosity compares reasonably well with the experimental values. Solidification parameters, such as temperature gradients and cooling rate are calculated at the instantaneous location of the solidification front and analyzed. This analysis suggests the formation of fully columnar grains of different sizes along the width and depth of the melt pool. Overall, the model provides a good description of thermo-fluidic transport in SLM of Ti6Al4V powder and the resulting temperature field, melt pool characteristics, as-solidified porosity and the expected grain structure. Based on the current analysis, an optimum processing window of 50–70 J mm−3 energy density is suggested for SLM of Ti6Al4V powder.

[1]  Recep Onler,et al.  Numerical and experimental investigations of micro and macro characteristics of direct metal laser sintered Ti-6Al-4V products , 2017 .

[2]  J. Ramkumar,et al.  Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel , 2018, Journal of Materials Processing Technology.

[3]  K. Senthilkumaran,et al.  Numerical and experimental investigations on laser melting of stainless steel 316L metal powders , 2014 .

[4]  Chen Hong,et al.  Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts , 2018 .

[6]  F. Calignano,et al.  Single scan track analyses on aluminium based powders , 2018 .

[7]  Todd Palmer,et al.  Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium , 2007 .

[8]  Weng-Sing Hwang,et al.  Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation , 2018 .

[9]  D. Gu,et al.  Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder , 2014 .

[10]  Rémy Glardon,et al.  Sintering of commercially pure titanium powder with a Nd:YAG laser source , 2003 .

[11]  J. Winczek,et al.  Analytical Description of the Temperature Field Induced by Laser Heat Source with Any Trajectory , 2016 .

[12]  F. H. Stott,et al.  Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials , 2004 .

[13]  Pradip Dutta,et al.  Effects of mould filling on evolution of the solid-liquid interface during solidification , 2009 .

[14]  D. Gu,et al.  Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study , 2014 .

[15]  A. Foroozmehr,et al.  Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed , 2016 .

[16]  S. L. Semiatin,et al.  Diffusion models for evaporation losses during electron-beam melting of alpha/beta-titanium alloys , 2004 .

[17]  Sen Wang,et al.  Experimental investigation on densification behavior and surface roughness of AlSi10Mg powders produced by selective laser melting , 2017 .

[18]  L. Froyen,et al.  Light extinction in metallic powder beds : Correlation with powder structure , 2005 .

[19]  V. K. Arghode,et al.  Computational Modeling of GMAW Process for Joining Dissimilar Aluminum Alloys , 2008 .

[20]  Hu Zhang,et al.  A finite element model of thermal evolution in laser micro sintering , 2016 .

[21]  Haihong Zhu,et al.  Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis , 2018 .

[22]  B. Stucker,et al.  Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting , 2017, Progress in Additive Manufacturing.

[23]  Bo Cheng,et al.  Stress and deformation evaluations of scanning strategy effect in selective laser melting , 2016 .

[24]  Tom Craeghs,et al.  A pragmatic model for selective laser melting with evaporation , 2009 .

[25]  Yang Liu,et al.  Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel , 2018 .

[26]  D. Ganji,et al.  Analytical investigation of the one dimensional heat transfer in logarithmic various surfaces , 2016 .