Design and control of a PEMFC powered electric wheelchair

Abstract This paper proposes the design and control of a fuel-cell powered wheelchair. Electric wheelchairs can improve moving ability for people with walking problems. However, their traveling distances are limited by the capacity of their batteries. We designed a fuel-cell powered electric wheelchair that can be continuously operated, thereby extending the moving range. The system consisted of three subsystems: a commercial electric wheelchair, a proton exchange membrane fuel cell (PEMFC), and two secondary battery sets. The study was carried out in three parts, investigating the fuel-cell control, power management, and system integration. First, we designed multivariable robust controllers for a 500 W PEMFC system to charge the battery sets by constant voltage/current. Second, we designed a serial power management system, where the wheelchair motors were directly driven by the secondary battery sets, which in turn were charged by the PEMFC when their capacities dropped below a certain level. Lastly, we integrated the three subsystems and verified the system performance by experiments. The results confirmed the effectiveness of the PEMFC system as a way to extend the traveling distance of a motorized wheelchair.

[1]  Keith Glover,et al.  Robust control design using normal-ized coprime factor plant descriptions , 1989 .

[2]  P. Ekdunge,et al.  THE FUEL CELL VEHICLE ANALYSIS OF ENERGY USE, EMISSIONS AND COST , 1998 .

[3]  S. Dunn.  Hydrogen Futures: Toward a Sustainable Energy System , 2001 .

[4]  Fu-Cheng Wang,et al.  Multivariable Robust Control for a 500W Self-Humidified PEMFC System , 2011, Eur. J. Control.

[5]  C. E. Thomas.  Transportation options in a carbon-constrained world: Hybrids, plug-in hybrids, biofuels, fuel cell electric vehicles, and battery electric vehicles , 2009 .

[6]  H. Funato,et al.  Fuel-cell parameter estimation and diagnostics , 2005, IEEE Transactions on Energy Conversion.

[7]  J. Suykens,et al.  Subspace identification of Hammerstein systems using least squares support vector machines , 2005 .

[8]  Carl-Jochen Winter,et al.  Hydrogen energy — Abundant, efficient, clean: A debate over the energy-system-of-change☆ , 2009 .

[9]  J. Javier Brey,et al.  Design of control systems for portable PEM fuel cells , 2007 .

[10]  H. Gorgun.  Dynamic modelling of a proton exchange membrane (PEM) electrolyzer , 2006 .

[11]  Fu-Cheng Wang,et al.  System identification and robust control of a portable proton exchange membrane full-cell system , 2007 .

[12]  Fu-Cheng Wang,et al.  Multivariable robust PID control for a PEMFC system , 2010 .

[13]  R. Latham,et al.  Biomedical Applications of Batteries , 2004 .

[14]  Fu-Cheng Wang,et al.  Design and Control of a Fuel Cell Powered Electric Lifter , 2012 .

[15]  Claire H. Woo,et al.  PEM fuel cell current regulation by fuel feed control , 2007 .

[16]  Fu-Cheng Wang,et al.  Design and implementation of fixed-order robust controllers for a proton exchange membrane fuel cell system , 2009 .

[17]  C. E. Thomas,et al.  Fuel cell and battery electric vehicles compared , 2009 .

[18]  Bart De Moor,et al.  N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systems , 1994, Autom..

[19]  L. F. Brown.  A comparative study of fuels for on-board hydrogen production for fuel-cell-powered automobiles , 2001 .

[20]  Fu-Cheng Wang,et al.  Multivariable robust control of a proton exchange membrane fuel cell system , 2008 .

[21]  Lino Guzzella,et al.  Optimal power management of an experimental fuel cell/supercapacitor-powered hybrid vehicle , 2005 .

[22]  Michel Cassir,et al.  Prospects of different fuel cell technologies for vehicle applications , 2002 .

[23]  T. Georgiou,et al.  Optimal robustness in the gap metric , 1990 .

[24]  Fortunato Migliardini,et al.  Performance investigation of 2.4 kW PEM fuel cell stack in vehicles , 2007 .