Integration of inverse nanocone array based bismuth vanadate photoanodes and bandgap-tunable perovskite solar cells for efficient self-powered solar water splitting

Bismuth vanadate (BiVO4) has been regarded as a promising photoanode material for photoelectrochemical (PEC) water splitting owing to its rich elemental abundance and relatively narrow bandgap. However, the incompatibility of the penetration depth and short diffusion length limits its performance. To overcome this shortcoming, we develop a cost-effective stamping method to fabricate inverse nanocone array (ICA) substrates for supporting nanoporous Mo-doped BiVO4 films. The ICAs show a remarkable light trapping effect in such a way that the intensive light absorption region is advantageously shifted from the top of the active layer on a planar substrate to the bottom surrounded by the ICA, where charge separation is strikingly more efficient. By integrating the ICA-photoanode with a tailor-made, bandgap-adjustable perovskite solar cell, we devised a PEC-photovoltaic (PEC-PV) tandem device, which has achieved a self-powered STH efficiency of around 6.3%. Our study opens a new avenue for designing solar fuel devices with PEC-PV architectures.

[1]  Y. Qu,et al.  Unveiling a Key Intermediate in Solvent Vapor Postannealing to Enlarge Crystalline Domains of Organometal Halide Perovskite Films , 2017 .

[2]  Yongfang Li,et al.  Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency , 2015, Advanced materials.

[3]  A. Tiwari,et al.  High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration , 2016, Nature Energy.

[4]  A. Kudo,et al.  Facile fabrication of an efficient BiVO4 thin film electrode for water splitting under visible light irradiation , 2012, Proceedings of the National Academy of Sciences.

[5]  D. Nocera,et al.  Wireless Solar Water Splitting Using Silicon-Based Semiconductors and Earth-Abundant Catalysts , 2011, Science.

[6]  Zhiyong Fan,et al.  Three-dimensional metal/oxide nanocone arrays for high-performance electrochemical pseudocapacitors. , 2014, Nanoscale.

[7]  Tao Yu,et al.  Solar hydrogen generation from seawater with a modified BiVO4 photoanode , 2011 .

[8]  Kazunari Domen,et al.  A Front‐Illuminated Nanostructured Transparent BiVO4 Photoanode for >2% Efficient Water Splitting , 2016 .

[9]  Zhiyong Fan,et al.  Low‐Cost, Flexible, and Self‐Cleaning 3D Nanocone Anti‐Reflection Films for High‐Efficiency Photovoltaics , 2014, Advanced materials.

[10]  Jens K Nørskov,et al.  Materials for solar fuels and chemicals. , 2016, Nature materials.

[11]  W. Mai,et al.  Carbon quantum dots as a visible light sensitizer to significantly increase the solar water splitting performance of bismuth vanadate photoanodes , 2017 .

[12]  Zhiyong Fan,et al.  Inverted nanocone-based thin film photovoltaics with omnidirectionally enhanced performance. , 2014, ACS nano.

[13]  Yi Cui,et al.  Efficient solar-driven water splitting by nanocone BiVO4-perovskite tandem cells , 2016, Science Advances.

[14]  Jinghua Guo,et al.  What Limits the Performance of Ta3N5 for Solar Water Splitting , 2016 .

[15]  K. Wong,et al.  Effects of a Molecular Monolayer Modification of NiO Nanocrystal Layer Surfaces on Perovskite Crystallization and Interface Contact toward Faster Hole Extraction and Higher Photovoltaic Performance , 2016 .

[16]  Y. Qu,et al.  Hierarchical Dual‐Scaffolds Enhance Charge Separation and Collection for High Efficiency Semitransparent Perovskite Solar Cells , 2016 .

[17]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[18]  James R. McKone,et al.  Solar water splitting cells. , 2010, Chemical reviews.

[19]  Kyoung-Shin Choi,et al.  Nanoporous BiVO4 Photoanodes with Dual-Layer Oxygen Evolution Catalysts for Solar Water Splitting , 2014, Science.

[20]  E. Alarousu,et al.  Fast Crystallization and Improved Stability of Perovskite Solar Cells with Zn2SnO4 Electron Transporting Layer: Interface Matters. , 2015, ACS applied materials & interfaces.

[21]  J. S. Lee,et al.  Hetero-type dual photoanodes for unbiased solar water splitting with extended light harvesting , 2016, Nature Communications.

[22]  Tom J. Savenije,et al.  The Origin of Slow Carrier Transport in BiVO4 Thin Film Photoanodes: A Time-Resolved Microwave Conductivity Study , 2013 .

[23]  Y. Tachibana,et al.  Artificial photosynthesis for solar water-splitting , 2012, Nature Photonics.

[24]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[25]  Li Wang,et al.  Nanostructured bismuth vanadate-based materials for solar-energy-driven water oxidation: a review on recent progress. , 2014, Nanoscale.

[26]  Matthew R. Shaner,et al.  Amorphous TiO2 coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation , 2014, Science.

[27]  Anders Hagfeldt,et al.  Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells , 2016 .

[28]  K. Domen,et al.  Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting. , 2014, Chemical Society reviews.

[29]  Yi Cui,et al.  The path towards sustainable energy. , 2016, Nature materials.

[30]  Y. Qu,et al.  Origin of the Different Photoelectrochemical Performance of Mesoporous BiVO4 Photoanodes between the BiVO4 and the FTO Side Illumination , 2015 .

[31]  Z. Zou,et al.  Electronic structure and optical properties of monoclinic clinobisvanite BiVO4. , 2011, Physical chemistry chemical physics : PCCP.

[32]  Shihe Yang,et al.  High performance inverted structure perovskite solar cells based on a PCBM:polystyrene blend electron transport layer , 2015 .

[33]  Bernd Rech,et al.  A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells , 2016, Science.

[34]  M. Grätzel.  Photoelectrochemical cells : Materials for clean energy , 2001 .

[35]  Z. Fan,et al.  A three-dimensional hexagonal fluorine-doped tin oxide nanocone array: a superior light harvesting electrode for high performance photoelectrochemical water splitting , 2014 .

[36]  Song Jin,et al.  Efficient Electrocatalytic and Photoelectrochemical Hydrogen Generation Using MoS2 and Related Compounds , 2016 .

[37]  Wei Chen,et al.  Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers , 2015, Science.

[38]  Xiangfeng Duan,et al.  Progress, challenge and perspective of heterogeneous photocatalysts. , 2013, Chemical Society reviews.

[39]  Anders Hagfeldt,et al.  Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21% , 2016, Nature Energy.

[40]  Federico Bella,et al.  Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers , 2016, Science.

[41]  Yongcai Qiu,et al.  Mesoporous TiO2 single crystals: facile shape-, size-, and phase-controlled growth and efficient photocatalytic performance. , 2013, ACS applied materials & interfaces.