A DC-contact MEMS shunt switch

This paper presents the design, fabrication, and performance of a metal-to-metal contact micro-electro-mechanical (MEMS) shunt switch. The switch is composed of a fixed-fixed metal beam with two pull-down electrodes and a central DC-contact area. The switch is placed in an in-line configuration in a coplanar waveguide transmission line. This topology results in a compact DC-contact shunt switch and high isolation at 0.1-18 GHz. The isolation at MM-wave frequencies is limited by the inductance to ground and is -20 dB at 18 GHz. The application areas are in wireless communications and high-isolation switching networks for satellite systems.

[1]  Guan-Leng Tan,et al.  DC-26 GHz MEMS series-shunt absorptive switches , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[2]  R. Drangmeister,et al.  MEMs microswitch arrays for reconfigurable distributed microwave components , 2000 .

[3]  Milton Feng,et al.  Rf' Mem Switches I . Introduciion , 2004 .

[4]  S. Eshelman,et al.  Characteristics of micromachined switches at microwave frequencies , 1996, 1996 IEEE MTT-S International Microwave Symposium Digest.

[5]  G.M. Rebeiz,et al.  Inline capacitive and DC-contact MEMS shunt switches , 2001, IEEE Microwave and Wireless Components Letters.

[6]  Geun-Ho Kim,et al.  Electroplated rf MEMS capacitive switches , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[7]  Gabriel M. Rebeiz,et al.  All-metal high-isolation series and series/shunt MEMS switches , 2001, IEEE Microwave and Wireless Components Letters.

[8]  C. Nguyen,et al.  Micromechanical electrostatic K-band switches , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[9]  R. Mihailovich,et al.  A DC-to-40 GHz four-bit RF MEMS true-time delay network , 2001, IEEE Microwave and Wireless Components Letters.

[10]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .