In-field fast calibration of FOG-based MWD IMU for horizontal drilling

A fiber optic gyroscope (FOG)-based measuring-while-drilling (MWD) device for horizontal drilling is developed and an in-field fast calibration method of the MWD inertial measurement unit (IMU) is presented. The IMU consists of a FOG triad and a quartz accelerometer triad. An error model for the inertial sensors is established and 12 errors are confirmed as the main error sources for horizontal drilling after an analysis. A five-rotation-in-level-plane (5RILP) in-field fast calibration scheme for the main errors of the MWD IMU is illustrated. The scheme can be conveniently implemented on an almost level plane, such as a table?plane, without any special external equipment. To solve the calibrated errors, a systematic approach based on specific force measurement observation is adopted. Observation equations?of the IMU errors are derived according to the rotation sequence of the calibration scheme. Simulation results show that the proposed calibration method is effective even if there are 5? errors in level and 10? errors in heading. Calibration experiments using the developed FOG-based MWD equipment on a table?plane confirm the validity of the proposed in-field calibration method. Inertial navigation tests show that the actual accuracy of the MWD IMU is greatly improved by 60.6% after in-field calibration.

[1]  Andrew Y. C. Nee,et al.  Methods for in-field user calibration of an inertial measurement unit without external equipment , 2008 .

[2]  John Weston,et al.  Strapdown Inertial Navigation Technology , 1997 .

[3]  Wouter Olthuis,et al.  Procedure for in-use calibration of triaxial accelerometers , 1997 .

[4]  Arild Saasen,et al.  Drilling Fluid affects MWD Magnetic Azimuth and Wellbore Position , 2004 .

[5]  Quan Zhang,et al.  An in situ hand calibration method using a pseudo-observation scheme for low-end inertial measurement units , 2012 .

[6]  Jari Kangas,et al.  An enhanced multi-position calibration method for consumer-grade inertial measurement units applied and tested , 2010 .

[7]  Yan Bin Gao,et al.  Systematic Calibration Method for FOG Inertial Measurement Units , 2013 .

[8]  Martin P. Mintchev,et al.  Experimental Feasibility of the In-Drilling Alignment Method for Inertial Navigation in Measurement-While-Drilling , 2011, IEEE Transactions on Instrumentation and Measurement.

[9]  Yuanxin Wu,et al.  Improved multi-position calibration for inertial measurement units , 2009 .

[10]  A. B. Chatfield.  Fundamentals of high accuracy inertial navigation , 1997 .

[11]  Naser El-Sheimy,et al.  A new multi-position calibration method for MEMS inertial navigation systems , 2007 .

[12]  Martin P. Mintchev,et al.  FOG-based navigation in downhole environment during horizontal drilling utilizing a complete inertial measurement unit: directional measurement-while-drilling surveying , 2005, IEEE Transactions on Instrumentation and Measurement.

[13]  Martin P. Mintchev,et al.  Quantitative Study of the Applicability of Fiber-Optic Gyroscopes for MWD Borehole Surveying , 2000 .

[14]  Nicholas Ioannides,et al.  Approaches to mitigate polymer-core loss in plastic optical fibers: a review , 2014 .

[15]  Sun Wen-sheng.  Research on the High Accuracy Rapid Test Method of IMU , 2008 .

[16]  Martin P. Mintchev,et al.  Observability Analysis for INS Alignment in Horizontal Drilling , 2007, IEEE Transactions on Instrumentation and Measurement.

[17]  Stefano Rossi,et al.  Two calibration procedures for a gyroscope-free inertial measurement system based on a double-pendulum apparatus , 2008 .