High-Order Analysis of Unidirectional Sandwich Panels with Flat and Generally Curved Faces and a “Soft” Core

The bending behavior of a unidirectional sandwich panel with flat and generally curved faces and a flexible core in the vertical direction is investigated. The studied panels consist of an upper flat face sheet, a core of variable thickness, and a lower face sheet that can take any geometrical layout described by an analytical function. The core is assumed a two-dimensional elastic medium with shear and transverse vertical rigidities only, and the face sheets are considered as membrane and bending members made of metallic or composite materials. The term unidirectional refers here either to a beam (narrow panel) or to a wide beam (panel) undergoing a cylindrical bending. The field equations and the boundary conditions are derived via the variational principle of the virtual work and transformed from the local polar coordinate system of the curved face into the global Cartesian one. Higher order effects due to flexibility of the core in the form of nonlinear deformation fields are incorporated in the proposed analysis as a result of the closed-form solution of the field equations and are not postulated a priori. Numerical results in terms of deformations, stresses, and stress resultants are presented for some typical cases of flat-curved panels. The effect of a wide range of layouts, various boundary conditions, and the influence of manufacturing imperfections in the form of initially wrinkled face are investigated. The results demonstrate the capabilities and generality of the proposed model and present its ability to predict the high-order localized effects that characterize such panels.

[1]  J. Stoer,et al.  Introduction to Numerical Analysis , 2002 .

[2]  Y. Frostig,et al.  Boundary condition effects in buckling of soft core sandwich panels , 1999 .

[3]  Yeoshua Frostig,et al.  Buckling of sandwich panels with a flexible core—high-order theory , 1998 .

[4]  Effects of Boundary Conditions in High-Order Buckling of Sandwich Panels with Transversely Flexible Core , 1998 .

[5]  Liviu Librescu,et al.  Recent developments in the modeling and behavior of advanced sandwich constructions: a survey , 2000 .

[6]  Yeoshua Frostig,et al.  Bending of Curved Sandwich Panels with a Transversely Flexible Core-Closed-Form High-Order Theory , 1999 .

[7]  Sture Smidt,et al.  Bending of curved sandwich beams , 1995 .

[8]  Ahmed K. Noor,et al.  Curved Sandwich Panels Subjected to Temperature Gradient and Mechanical Loads , 1997 .

[9]  Overall Behaviour of Singly Curved Shallow Sandwich Panels: the Case of General Boundary Conditions , 2000 .

[10]  Yeoshua Frostig,et al.  Free Vibrations Of Sandwich Beams With A Transversely Flexible Core: A High Order Approach , 1994 .

[11]  Y. Frostig,et al.  HIGH-ORDER BENDING OF SANDWICH BEAMS WITH TRANSVERSELY FLEXIBLE CORE AND NONPARALLEL SKINS , 1994 .

[12]  N. Paydar.  Axisymmetric buckling of an annular sandwich plate of varying thickness , 1990 .

[13]  M. Baruch,et al.  HIGH-ORDER BUCKLING ANALYSIS OF SANDWICH BEAMS WITH TRANSVERSELY FLEXIBLE CORE , 1993 .

[14]  A. V. Singh,et al.  Free vibration analysis of deep doubly curved sandwich panels , 1999 .

[15]  Liviu Librescu,et al.  Postbuckling of anisotropic flat and doubly-curved sandwich panels under complex loading conditions , 1998 .

[16]  Yeoshua Frostig,et al.  High‐Order Theory for Sandwich‐Beam Behavior with Transversely Flexible Core , 1992 .

[17]  F. J. Plantema,et al.  Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates and Shells , 1966 .

[18]  Ahmed K. Noor,et al.  Computational Models for Sandwich Panels and Shells , 1996 .

[19]  J. Hutchinson,et al.  Buckling of Bars, Plates and Shells , 1975 .

[20]  J. Rossettos.  Effects of a Delamination and Initial Curvature on the Fundamental Frequency of Sandwich Beams , 1998 .

[21]  J. Whitney.  Structural Analysis of Laminated Anisotropic Plates , 1987 .

[22]  Yeoshua Frostig.  On stress concentration in the bending of sandwich beams with transversely flexible core , 1993 .

[24]  H. G. Allen.  Analysis and design of structural sandwich panels , 1969 .

[25]  Liviu Librescu,et al.  Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads , 1994 .

[26]  Elena Bozhevolnaya,et al.  Assessment of models for analysis of singly-curved sandwich panels , 1998 .

[27]  Yeoshua Frostig,et al.  Behavior of delaminated sandwich beam with transversely flexible core — high order theory , 1992 .

[28]  Y. Frostig,et al.  Nonlinear Behavior of Sandwich Panels with a Transversely Flexible Core , 1999 .

[29]  J. Hutchinson,et al.  An introduction to the elastic stability of structures , 1976 .

[30]  C. Libove,et al.  Stress Analysis of Sandwich Plates With Unidirectional Thickness Variation , 1986 .

[31]  Elena Bozhevolnaya,et al.  Nonlinear closed-form high-order analysis of curved sandwich panels , 1997 .

[32]  James W. Daniel.  A Road Map of Methods for Approximating Solutions of Two-Point Boundary-Value Problems , 1978, Codes for Boundary-Value Problems in Ordinary Differential Equations.

[33]  Gyung-Jin Park,et al.  Optimal design of sandwich beams , 1990 .

[34]  A. Andrew.  Two-Point Boundary Value Problems: Shooting Methods , 1975 .

[35]  S. Smidt,et al.  Bending of curved sandwich beams, a numerical approach , 1996 .

[36]  Elena Bozhevolnaya,et al.  Overall behaviour of shallow singly-curved sandwich panels , 1997 .

[37]  Yeoshua Frostig,et al.  High-order bending of piecewise uniform sandwich beams with a tapered transition zone and a transversely flexible core , 1995 .

[38]  Y Frostig.  High-order behavior of sandwich beams with flexible core and transverse diaphragms , 1993 .