论文信息 - Mechanism analysis of DC bias increasing risk of commutation failure

Mechanism analysis of DC bias increasing risk of commutation failure

The relation among DC bias, zero-crossing shifting resulting from voltage distortion and commutation failure is analyzed in this paper. It is pointed out that magnetizing current of converter transformer distorts when DC biasing, which not only may cause distortion of AC bus voltage, but increase risk of commutation failure. Based on PSCAD / EMTDC simulation software, China Southern Power Grid AC-DC Parallel Transmission System is established. By means of this model, the above hypothesis is verified with simulation tests. The correctness of theoretical analysis is proved with simulation results.

[1] Mehdi Vakilian,et al. A method for modeling nonlinear core characteristics of transformers during transients , 1994 .

[2] A. M. Gole,et al. Prediction of Core Saturation Instability at an HVDC Converter , 1996, IEEE Power Engineering Review.

[3] S. Ihara,et al. Screening for HVDC system core saturation instability , 2000 .

[4] P. R. Price,et al. Geomagnetically Induced Current Effects on Transformers , 2002, IEEE Power Engineering Review.

[5] Cheng Cixuan. Simulating Analysis of Exciting Current of Single Phase Transformer on DC Bias , 2005 .

[6] Li Jing-yu. Research on DC Bias of Converter Transformer , 2005 .

[7] Zhang Qiang. ANALYSIS ON INFLUENCE OF GROUND ELECTRODE CURRENT IN HVDC ON AC POWER NETWORK , 2005 .

[8] Oszkar Biro,et al. Prediction of magnetising current waveform in a single-phase power transformer under DC bias , 2006 .

[9] Wu Xiao-chen,et al. Simulation Study on Commutation Failure Caused by Switching AC Filters of Inverter Stations in Multi-Infeed HVDC System , 2008 .