High‐frequency square‐wave voltage injection position sensorless control method using single current sensor

[1]  C. Xia,et al.  A direct field‐circuit coupled analytical modelling method for permanent magnet motor operation performance analysis , 2022, IET Electric Power Applications.

[2]  C. Xia,et al.  Minimization of Additional High-Frequency Torque Ripple for Square-Wave Voltage Injection IPMSM Sensorless Drives , 2020, IEEE Transactions on Power Electronics.

[3]  Kwang-Woon Lee,et al.  Dynamic Performance Improvement of a Current Offset Error Compensator in Current Vector-Controlled SPMSM Drives , 2019, IEEE Transactions on Industrial Electronics.

[4]  Dianguo Xu,et al.  Sensorless Control of IPMSM Drives Using a Pseudo-Random Phase-Switching Fixed-Frequency Signal Injection Scheme , 2018, IEEE Transactions on Industrial Electronics.

[5]  Yunhui Li,et al.  Zero Voltage Vector Sampling Method for PMSM Three-Phase Current Reconstruction Using Single Current Sensor , 2017, IEEE Transactions on Power Electronics.

[6]  Rae-Young Kim,et al.  A New Rotor Position Estimation Method of IPMSM Using All-Pass Filter on High-Frequency Rotating Voltage Signal Injection , 2016, IEEE Transactions on Industrial Electronics.

[7]  Frede Blaabjerg,et al.  Minimum-Voltage Vector Injection Method for Sensorless Control of PMSM for Low-Speed Operations , 2016, IEEE Transactions on Power Electronics.

[8]  Long Wu,et al.  An Extended Flux Model-Based Rotor Position Estimator for Sensorless Control of Salient-Pole Permanent-Magnet Synchronous Machines , 2015, IEEE Transactions on Power Electronics.

[9]  Sungho Jung,et al.  Analog Filtering Method for Sensorless AC Machine Control With Carrier-Frequency Signal Injection , 2015, IEEE Transactions on Industrial Electronics.

[10]  J. M. Liu,et al.  Sensorless Control Strategy by Square-Waveform High-Frequency Pulsating Signal Injection Into Stationary Reference Frame , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[11]  Seung-Ki Sul,et al.  Compensation of current measurement error for current-controlled PMSM drives , 2014, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[12]  Younghoon Cho,et al.  A Three-Phase Current Reconstruction Strategy With Online Current Offset Compensation Using a Single Current Sensor , 2012, IEEE Transactions on Industrial Electronics.

[13]  Yen-Shin Lai,et al.  New Hybrid Pulsewidth Modulation Technique to Reduce Current Distortion and Extend Current Reconstruction Range for a Three-Phase Inverter Using Only DC-link Sensor , 2012, IEEE Transactions on Power Electronics.

[14]  S. Sul,et al.  PWM switching frequency signal injection sensorless method in IPMSM , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[15]  Kozo Ide,et al.  High bandwidth sensorless algorithm for AC machines based on square-wave type voltage injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[16]  P. Garcia,et al.  Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless-Controlled IPM Synchronous Machines , 2007, 2007 IEEE Industry Applications Annual Meeting.

[17]  Shigeru Okuma,et al.  An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors , 2003, IEEE Trans. Ind. Electron..

[18]  Hirofumi Akagi,et al.  Implementation and position control performance of a position-sensorless IPM motor drive system based on magnetic saliency , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[19]  Seung-Ki Sul,et al.  Analysis and compensation of current measurement error in vector controlled AC motor drives , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[20]  Robert D. Lorenz,et al.  Transducerless position and velocity estimation in induction and salient AC machines , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[21]  M. Ehsani,et al.  A novel position sensor elimination technique for the interior permanent-magnet synchronous motor drive , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[22]  Barry W. Williams,et al.  Derivation of motor line-current waveforms from the DC-link current of an inverter , 1989 .