Effects of Pluronic F127 on phase inversion and membrane formation of PAN hollow fibers for air filtration

[1]  Zhenyu Cui,et al.  Antibacterial and environmentally friendly chitosan/polyvinyl alcohol blend membranes for air filtration. , 2018, Carbohydrate polymers.

[2]  Tai‐Shung Chung,et al.  Developing ultra-high gas permeance PVDF hollow fibers for air filtration applications , 2018, Separation and Purification Technology.

[3]  Zhongyi Jiang,et al.  Manipulating membrane surface porosity and pore size by in-situ assembly of Pluronic F127 and tannin , 2018, Journal of Membrane Science.

[4]  M. Dohnal,et al.  Air filtration performance of symmetric polypropylene hollow-fibre membranes for nanoparticle removal , 2018 .

[5]  J. Lai,et al.  Preparation of polyamide/polyacrylonitrile composite hollow fiber membrane by synchronous procedure of spinning and interfacial polymerization , 2018 .

[6]  D. Rana,et al.  Separation of bovine serum albumin and humic acid contaminants from aqueous stream using tailored poly (amide imide) ultrafiltration membranes , 2018 .

[7]  Mufang Li,et al.  A facile route to the production of polymeric nanofibrous aerogels for environmentally sustainable applications , 2018 .

[8]  Tai‐Shung Chung,et al.  High-performance composite hollow fiber membrane for flue gas and air separations , 2017 .

[9]  Jian Zuo,et al.  Novel PVDF membranes comprising n-butylamine functionalized graphene oxide for direct contact membrane distillation , 2017 .

[10]  Jian Zuo,et al.  Using green solvent, triethyl phosphate (TEP), to fabricate highly porous PVDF hollow fiber membranes for membrane distillation , 2017 .

[11]  Wai Fen Yong,et al.  Novel Hollow Fiber Air Filters for the Removal of Ultrafine Particles in PM2.5 with Repetitive Usage Capability. , 2017, Environmental science & technology.

[12]  Tai‐Shung Chung,et al.  Design of high efficiency PVDF-PEG hollow fibers for air filtration of ultrafine particles , 2017 .

[13]  G. Han,et al.  Effects of polyethylene glycol on membrane formation and properties of hydrophilic sulfonated polyphenylenesulfone (sPPSU) membranes , 2017 .

[14]  Li Zhisheng,et al.  Sources, health effects and control strategies of indoor fine particulate matter (PM2.5): A review. , 2017 .

[15]  Hongnan Zhang,et al.  A low filtration resistance three-dimensional composite membrane fabricated via free surface electrospinning for effective PM2.5 capture , 2017 .

[16]  L. Cheng,et al.  Strong effects of Tween 20 additive on the morphology and performance of poly(vinylidene fluoride) hollow‐fiber membranes , 2017 .

[17]  Tai‐Shung Chung,et al.  Molecular interaction between acidic sPPSU and basic HPEI polymers and its effects on membrane formation for ultrafiltration , 2017 .

[18]  J. Lai,et al.  On the initiation of macrovoids in polymeric membranes – effect of polymer chain entanglement , 2016 .

[19]  B. Ding,et al.  Anti-deformed Polyacrylonitrile/Polysulfone Composite Membrane with Binary Structures for Effective Air Filtration. , 2016, ACS applied materials & interfaces.

[20]  Guangmei Xia,et al.  Synthesis and anisotropic self-assembly of Ag nanoparticles immobilized by the Pluronic F127 triblock copolymer for colorimetric detection of H2O2 , 2015 .

[21]  Yi Cui,et al.  Transparent air filter for high-efficiency PM2.5 capture , 2015, Nature Communications.

[22]  Tai‐Shung Chung,et al.  Recent advances in membrane distillation processes: Membrane development, configuration design and application exploring , 2015 .

[23]  Enrico Drioli,et al.  Towards non-toxic solvents for membrane preparation: a review , 2014 .

[24]  Rong Wang,et al.  Insight into the role of amphiphilic pluronic block copolymer as pore-forming additive in PVDF membrane formation , 2013 .

[25]  Da-Ming Wang,et al.  Recent advances in preparation and morphology control of polymeric membranes formed by nonsolvent induced phase separation , 2013 .

[26]  J. Crittenden,et al.  Low-cost antifouling PVC ultrafiltration membrane fabrication with Pluronic F 127: Effect of additives on properties and performance , 2012 .

[27]  Juin-Yih Lai,et al.  Evolution of polymeric hollow fibers as sustainable technologies: Past, present, and future , 2012 .

[28]  Behnam Ghalei,et al.  Characterization and gas permeability of polyurethane and polyvinyl acetate blend membranes with polyethylene oxide–polypropylene oxide block copolymer , 2012 .

[29]  Defeng Wu,et al.  Rheology of Carbon Nanotubes–Filled Poly(vinylidene fluoride) Composites , 2012 .

[30]  Y. Qiu,et al.  Rheological properties of polyvinyl butyral/Pluronic F127/PEG200 blend systems , 2011 .

[31]  A. Rahimpour,et al.  Fabrication and development of interfacial polymerized thin-film composite nanofiltration membrane using different surfactants in organic phase; study of morphology and performance , 2009 .

[32]  P. Sukitpaneenit,et al.  Molecular elucidation of morphology and mechanical properties of PVDF hollow fiber membranes from aspects of phase inversion, crystallization and rheology , 2009 .

[33]  M. Ulbricht,et al.  Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives , 2009 .

[34]  Wei Zhao,et al.  Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent , 2008 .

[35]  N. Peng,et al.  The effects of spinneret dimension and hollow fiber dimension on gas separation performance of ultra-thin defect-free Torlon® hollow fiber membranes , 2008 .

[36]  A. Rahimpour,et al.  The effect of anionic, non-ionic and cationic surfactants on morphology and performance of polyethersulfone ultrafiltration membranes for milk concentration , 2007 .

[37]  Qiang Sun,et al.  Enhanced permeation performance of cellulose acetate ultrafiltration membrane by incorporation of Pluronic F127 , 2007 .

[38]  Ming Yang,et al.  Effect of draw ratio and coagulant composition on polyacrylonitrile hollow fiber membranes , 2006 .

[39]  Qiang Sun,et al.  Improved permeation performance of Pluronic F127–polyethersulfone blend ultrafiltration membranes , 2006 .

[40]  N. Widjojo,et al.  Thickness and Air Gap Dependence of Macrovoid Evolution in Phase-Inversion Asymmetric Hollow Fiber Membranes , 2006 .

[41]  Da-Ming Wang,et al.  Morphology control of polysulfone hollow fiber membranes via water vapor induced phase separation , 2006 .

[42]  Matthias Wessling,et al.  High performance micro-engineered hollow fiber membranes by smart spinneret design , 2005 .

[43]  J. Hubbell,et al.  Amphiphilic hydrogel nanoparticles. Preparation, characterization, and preliminary assessment as new colloidal drug carriers. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[44]  D. Topgaard,et al.  Surfactant/Nonionic polymer interaction. A NMR diffusometry and NMR electrophoretic investigation. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[45]  J. Lai,et al.  Mechanical Properties of Asymmetric Polysulfone Membranes Containing Surfactant as Additives , 2001 .

[46]  P. Bahadur,et al.  Effect of additives on the micellization of PEO/PPO/PEO block copolymer F127 in aqueous solution , 2001 .

[47]  D. R. Lloyd,et al.  Structure control of anisotropic and asymmetric polypropylene membrane prepared by thermally induced phase separation , 2000 .

[48]  P. Alexandridis,et al.  Evolution in Structural Polymorphism of Pluronic F127 Poly(ethylene oxide)−Poly(propylene oxide) Block Copolymer in Ternary Systems with Water and Pharmaceutically Acceptable Organic Solvents: From “Glycols” to “Oils”† , 2000 .

[49]  L. Cheng,et al.  PVDF membrane formation by diffusion‐induced phase separation‐morphology prediction based on phase behavior and mass transfer modeling , 1999 .

[50]  Juin-Yih Lai,et al.  Formation mechanism of the macrovoids induced by surfactant additives , 1998 .

[51]  †‡ and Paschalis Alexandridis,et al.  Reverse Micelle Formation and Water Solubilization by Polyoxyalkylene Block Copolymers in Organic Solvent , 1997 .

[52]  W. Koros,et al.  A guide to establishing hollow fiber macroscopic properties for membrane applications , 1997 .

[53]  L. Fung-Ching.  Effect of surfactants on the structure of PMMA membranes , 1997 .

[54]  Xiaolei Li,et al.  Rheological analysis of core-stabilized Pluronic F127 by semi-interpenetrating network (sIPN) in aqueous solution , 2018 .

[55]  Feng Yang,et al.  Effect of surfactant on morphology and pore size of polysulfone membrane , 2017, Journal of Polymer Research.

[56]  Chen Sheng-Chang,et al.  ポリ(ふっ化ビニリデン)中空繊維膜の形態と性能に及ぼすTween20添加剤の強い効果【Powered by NICT】 , 2017 .

[57]  F. Wang,et al.  Electrospun Nanofibers Membranes for Effective Air Filtration , 2017 .

[58]  Zhisheng Li,et al.  Sources, health effects and control strategies of indoor fine particulate matter (PM2.5): A review. , 2017, The Science of the total environment.

[59]  S. Nunes,et al.  Fabrication of polyacrylonitrile hollow fiber membranes from ionic liquid solutions , 2016 .

[60]  B. Bruggen,et al.  Modern applications in membrane science and technology , 2011 .