Hardness and Wear Behavior of Heat Treated Aluminium Silicon Alloy SiC Particle Reinforced Composite

The A356 Aluminium Silicon alloy is reinforced with Silica Carbide particles (SiCp) to form metal matrix composite by stir casting method to study the hardness and wear properties. The composites are prepared for weight fraction of 2, 4 and 6% of SiC with the base alloy and their characteristics are observed at post T6 full heat treated condition. The optical microscopic metallography observation shows the rosettes of uniform spheroidal grains of strain free eutectic silicon phase in proeutectic Aluminium matrix after heat treatment. The hardness and wear properties of the A356-SiC composites have increased with the increase in weight percentage of reinforcement particle in the base alloy. Maximum hardness and wear resistance is observed for 6% SiC which is the maximum percentage of inclusion of secondary element considered under this study. A comprehensive discussion is made on the strengthening of the A356 alloy on addition of hard SiC particles that has improved the hardness and wear characteristics of composites in heat treated conditions.

[1]  R. Sahu,et al.  Centrifugally cast A356/SiC functionally graded composite: Fabrication and mechanical property assessment , 2021, Materials Today: Proceedings.

[2]  N. I,et al.  Influence of mould materials on wear behavior of A356 alloy , 2021 .

[3]  P. S. Rao,et al.  Influence of wear parameters on friction performance of A356 aluminum – graphite/ granite particles reinforced metal matrix hybrid composites , 2019, Heliyon.

[4]  V. Demir,et al.  Wear Behaviour of A356/TiAl3 in Situ Composites Produced by Mechanical Alloying , 2016 .

[5]  K. Balasubramanian,et al.  Process Optimization for Pore Defect in Casting – A Review , 2015 .

[6]  K. Alaneme,et al.  Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics , 2015 .

[7]  Akira Iwabuchi,et al.  The effect of a T6 heat treatment on the fretting wear of a SiC particle-reinforced A356 aluminum alloy matrix composite , 2000 .

[8]  Sukangkana Talangkun,et al.  Microstructures and hardness of A356-SiC composites produced by the mechanical stir casting , 2018 .

[9]  N. Sateesh,et al.  Wear Behavior Analysis of Silica Carbide Based Aluminum Metal Matrix Composites , 2018 .

[10]  Mohamed Thariq Hameed Sultan,et al.  Manufacturing techniques of composites for aerospace applications , 2018 .

[11]  S. Kumar,et al.  Three Body Abrasive Wear Study on A356 Aluminum Alloy under T6 Heat Treated Conditions , 2015 .

[12]  D. Prasad,et al.  Investigations on mechanical properties of aluminum hybrid composites , 2014 .

[13]  M. Rahman,et al.  Characterization of Silicon Carbide Reinforced Aluminum Matrix Composites , 2014 .

[14]  M. Z. Omar,et al.  Wear Properties of A356/Al2O3 Metal Matrix Composites Produced by Semisolid Processing☆ , 2013 .

[15]  C. Subramanian,et al.  Dry sliding wear of aluminium composites : A review , 1997 .