Image analysis for detecting aggregate gradation in asphalt mixture from planar images

Abstract The mechanical properties of bituminous mixture strongly depend on the gradation of the aggregate that represents the mineral skeleton of the mixture, since for open and gap-graded mixtures, stresses due to vehicles in movement on the pavement are mainly transmitted through their contacts. Internal structure of bituminous mixture is, therefore, of great interest for road and infrastructure engineering and it is appropriate to study it with recently developed image analysis method. The purpose of this study was to finalize an effective analysis of asphalt section image for automatically extracting aggregate gradation without the need of separation of the bitumen from the aggregate. This paper proves that, thanks to the synergic use of different segmentation methods of the digital images taken on slices of cores from the pavement, it is possible to obtain a reliable gradation of the mineral skeleton of the mixture. The proposed methodology allows one to estimate the aggregate gradation that, otherwise, it would be necessary to establish via specially equipped laboratory, undertaking time-consuming tests that also imply health risks for the operators, due to the use of solvents and other hazardous materials.

[1]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[2]  Herbert Freeman,et al.  On the Encoding of Arbitrary Geometric Configurations , 1961, IRE Trans. Electron. Comput..

[3]  Frank Harary,et al.  Boolean distance for graphs , 1982, Discret. Math..

[4]  John F. Canny,et al.  A Computational Approach to Edge Detection , 1986, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[5]  Sanjeev Adhikari,et al.  Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images , 2009 .

[6]  A. Kwan,et al.  Particle shape analysis of coarse aggregate using digital image processing , 1999 .

[7]  Eugene Fodor,et al.  New York-New Jersey , 1966 .

[8]  Lyndon Smith,et al.  A new approach to the three-dimensional quantification of angularity using image analysis of the size and form of coarse aggregates , 2007 .

[9]  Andy Collop,et al.  Aggregate Orientation and Segregation in Laboratory-Compacted Asphalt Samples , 2004 .

[10]  Xiaoxiong Zhong,et al.  Study of Compaction in Hot-Mix Asphalt Using Computer Simulations , 2008 .

[11]  Zhong Qi Yue,et al.  Digital image processing for aggregate orientation in asphalt concrete mixtures , 1997 .

[12]  J. R. Fernlund.  3-D image analysis size and shape method applied to the evaluation of the Los Angeles test , 2005 .

[13]  Herbert Freeman,et al.  Computer Processing of Line-Drawing Images , 1974, CSUR.

[14]  Samuel Kotz,et al.  Process Capability Indices , 1993 .

[15]  Arun Shukla,et al.  Simulation of Asphalt Materials Using Finite Element Micromechanical Model with Damage Mechanics , 2003 .

[16]  Erol Tutumluer,et al.  Evaluation of image analysis techniques for quantifying aggregate shape characteristics , 2007 .

[17]  Rafael C. González,et al.  Digital image processing using MATLAB , 2006 .

[18]  Guk-Rwang Won.  American Society for Testing and Materials , 1987 .

[19]  Akh Kwan,et al.  Particle size distribution analysis of coarse aggregate using digital image processing , 1998 .

[20]  Ye Zhou,et al.  Segmentation of petrographic images by integrating edge detection and region growing , 2004, Comput. Geosci..

[21]  Dana H. Ballard,et al.  Computer Vision , 1982 .