High Efficiency Energy Conversion System for Decreaces in Electric Vehicle Battery Terminal Voltage

[1]  R. W. De Doncker,et al.  Enhanced Modulation Strategy for a Three-Phase Dual Active Bridge—Boosting Efficiency of an Electric Vehicle Converter , 2013, IEEE Transactions on Power Electronics.

[2]  J. A. Ferreira,et al.  Optimal operating ranges of three modulation methods in dual active bridge converters , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[3]  Atsuo Kawamura,et al.  Snubber-Assisted Zero-Voltage and Zero-Current Transition Bilateral Buck and Boost Chopper for EV Drive Application and Test Evaluation at 25 kW , 2009, IEEE Transactions on Industrial Electronics.

[4]  Douglas J. Nelson,et al.  Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[5]  German G Oggier,et al.  Modulation strategy to operate the dual active bridge DC-DC converter under soft switching in the whole operating range , 2011, IEEE Transactions on Power Electronics.

[6]  Pavol Bauer,et al.  Driving Range Extension of EV With On-Road Contactless Power Transfer—A Case Study , 2013, IEEE Transactions on Industrial Electronics.

[7]  Mo-Yuen Chow,et al.  A Survey on the Electrification of Transportation in a Smart Grid Environment , 2012, IEEE Transactions on Industrial Informatics.

[8]  D.M. Divan,et al.  A three-phase soft-switched high power density DC/DC converter for high power applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[9]  M. Sanada,et al.  Effects and Compensation of Magnetic Saturation in Flux-Weakening Controlled Permanent Magnet Synchronous Motor Drives , 1994 .

[10]  H. Akagi,et al.  A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation , 2007, IEEE Transactions on Power Electronics.

[11]  Akihiko Yokoyama,et al.  Autonomous Distributed V2G (Vehicle-to-Grid) Satisfying Scheduled Charging , 2012, IEEE Transactions on Smart Grid.

[12]  Huang-Jen Chiu,et al.  A bidirectional DC–DC converter for fuel cell electric vehicle driving system , 2006, IEEE Transactions on Power Electronics.

[13]  Haihua Zhou,et al.  Hybrid Modulation for Dual-Active-Bridge Bidirectional Converter With Extended Power Range for Ultracapacitor Application , 2009 .

[14]  R. T. Naayagi,et al.  High-Power Bidirectional DC–DC Converter for Aerospace Applications , 2012, IEEE Transactions on Power Electronics.

[15]  Olle Sundström,et al.  Flexible Charging Optimization for Electric Vehicles Considering Distribution Grid Constraints , 2012, IEEE Transactions on Smart Grid.

[16]  J.W. Kolar,et al.  Impact of power density maximization on efficiency of dc-dc converter systems , 2007, 2007 7th Internatonal Conference on Power Electronics.

[17]  Zhiyu Shen,et al.  Soft-switching capability analysis of a dual active bridge dc-dc converter , 2009, 2009 IEEE Electric Ship Technologies Symposium.

[18]  Johann W. Kolar,et al.  Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications , 2012, IEEE Transactions on Industrial Electronics.

[19]  Steven Liu,et al.  Energy Management for Smart Grids With Electric Vehicles Based on Hierarchical MPC , 2013, IEEE Transactions on Industrial Informatics.

[20]  A. Emadi,et al.  A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[21]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[22]  António J. Marques Cardoso,et al.  Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles , 2012, IEEE Transactions on Vehicular Technology.