On post-breakdown initialization for ignition models

[1]  A. Wimmer,et al.  A thermodynamic model for the plasma kernel volume and temperature resulting from spark discharge at high pressures , 2018, Journal of Thermal Analysis and Calorimetry.

[2]  T. Lucchini,et al.  Modeling Ignition and Premixed Combustion Including Flame Stretch Effects , 2017 .

[3]  J. Naber,et al.  Experimental and Numerical Study of Flame Kernel Formation Processes of Propane-Air Mixture in a Pressurized Combustion Vessel , 2016 .

[4]  Tommaso Lucchini,et al.  A Comprehensive Model to Predict the Initial Stage of Combustion in SI Engines , 2013 .

[5]  Charles E. Roberts,et al.  The Effect of Sparkplug Design on Initial Flame Kernel Development and Sparkplug Performance , 2006 .

[6]  Myung Taeck Lim,et al.  Spark kernel development in constant volume combustion , 2003 .

[7]  J. Warnatz,et al.  Geometrical study of spark ignition in two dimensions , 2000 .

[8]  M. Capitelli,et al.  Transport properties of high temperature air in local thermodynamic equilibrium , 2000 .

[9]  M. Sunwoo,et al.  A Modeling and Experimental Study of Initial Flame Kernel Development and Propagation in SI Engines , 2000 .

[10]  Kang Y. Huh,et al.  Development of a Coherent Flamelet Model for a Spark-Ignited Turbulent Premixed Flame in a Closed Vessel , 1998 .

[11]  M. Akram.  Two-Dimensional Model for Spark Discharge Simulation in Air , 1996 .

[12]  Rudolf Maly,et al.  A Fundamental Model for Flame Kernel Formation in S. I. Engines , 1992 .

[13]  Eran Sher,et al.  On the birth of spark channels , 1992 .

[14]  Myung Taeck Lim,et al.  Prediction of spark kernel development in constant volume combustion , 1987 .

[15]  P. Vervisch,et al.  DNS and LES of spark ignition with an automotive coil , 2019, Proceedings of the Combustion Institute.

[16]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .

[17]  Brandon Sforzo,et al.  Post discharge evolution of a spark igniter kernel , 2015 .

[18]  Gian Marco Bianchi,et al.  Validation of a Lagrangian Ignition Model in SI Engine Simulations , 2010 .

[19]  M. Capitelli,et al.  Thermodynamic and transport properties in equilibrium air plasmas in a wide pressure and temperature range , 2008 .

[20]  R. Matthews,et al.  Thermal and Flow Fields Modeling of Fast Spark Discharges in Air , 2007 .

[21]  T. Poinsot,et al.  Theoretical and numerical combustion , 2001 .

[22]  M. Schäfer,et al.  I-D simulation of a spark discharge in air , 1996 .

[23]  J. Heywood,et al.  From Spark Ignition to Flame Initiation , 1995 .

[24]  S. Au,et al.  The influence of the igniter-induced blast wave upon the initial volume and expansion of the flame kernel , 1992 .

[25]  Vedat S. Arpaci,et al.  Spark ignition of propane-air mixtures near the minimum ignition energy: Part II. A model development , 1991 .

[26]  Antonio D'Alessio,et al.  Development of hot nitrogen kernel, produced by a very fast spark discharge , 1989 .

[27]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[28]  Eran Sher,et al.  A theoretical study of the ignition of a reactive medium by means of an electrical discharge , 1985 .

[29]  R. Maly,et al.  Spark Ignition: Its Physics and Effect on the Internal Combustion Engine , 1984 .

[30]  Derek Bradley,et al.  Spark ignition of turbulent gases , 1982 .

[31]  R. Maly,et al.  Initiation and propagation of flame fronts in lean CH4-air mixtures by the three modes of the ignition spark , 1979 .

[32]  M. Kono,et al.  The optimum condition for ignition of gases by composite sparks , 1977 .