Coupled Inductors With Crossed Anisotropy ${\rm CoZrTa/SiO}_{2}$ Multilayer Cores

Four-turn coupled (flux-closed) inductor structures have been fabricated and tested for use in high-power-density integrated voltage regulator (IVR) applications. Our solenoid-like structure is comprised of a laminated magnetic core of four rungs surrounded by four Cu windings creating four coupled inductors. The magnetic core is made of laminations of ultra-high-vacuum-sputtered [5 nm Ta/200 nm Co91.5Zr4.0Ta4.5(CZT)/7 nm SiO2] repeated 20 times. Individual CZT layers are deposited under a magnetic bias to induce uniaxial anisotropy. The quad-coupled inductor shows a frequency response with a measured self-inductance of 7.4 nH for one inductor sustained up to 100 MHz and roll-off to half this low-frequency value at ~450 MHz. This inductance is more than 65× higher than what would be calculated from an air-core inductor of equivalent geometry.

[1]  Peng Xu,et al.  Performance improvements of interleaving VRMs with coupling inductors , 2001 .

[2]  W. Xu,et al.  Sub-100 μm scale on-chip inductors with CoZrTa for GHz applications , 2011 .

[3]  K. Shepard,et al.  Vector control of induced magnetic anisotropy using an in situ quadrupole electromagnet in ultrahigh vacuum sputtering. , 2012, The Review of scientific instruments.

[4]  Cheng Cheng,et al.  Design of coupled power inductors with crossed anisotropy magnetic core for integrated power conversion , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[5]  S. Borkar,et al.  Review of On-Chip Inductor Structures With Magnetic Films , 2009, IEEE Transactions on Magnetics.

[6]  Kenneth L. Shepard,et al.  Integrated on-chip inductors with electroplated magnetic yokes (invited) , 2012 .

[7]  P. Hazucha,et al.  A 100MHz Eight-Phase Buck Converter Delivering 12A in 25mm2 Using Air-Core Inductors , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[8]  G. Schrom,et al.  Integrated On-Chip Inductors With Magnetic Films , 2006, IEEE Transactions on Magnetics.

[9]  S. Narendra,et al.  A 480-MHz, multi-phase interleaved buck DC-DC converter with hysteretic control , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[10]  Peter Hazucha,et al.  Integrated on-chip inductors using magnetic material (invited) , 2008 .

[11]  Charles R. Sullivan,et al.  Coupled-inductor design optimization for fast-response low-voltage DC-DC converters , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[12]  Dok Won Lee,et al.  Fabrication and Analysis of High-Performance Integrated Solenoid Inductor With Magnetic Core , 2008, IEEE Transactions on Magnetics.

[13]  Luca P. Carloni,et al.  An integrated four-phase buck converter delivering 1A/mm2 with 700ps controller delay and network-on-chip load in 45-nm SOI , 2011, 2011 IEEE Custom Integrated Circuits Conference (CICC).

[14]  Ioannis Kymissis,et al.  A 2.5D Integrated Voltage Regulator Using Coupled-Magnetic-Core Inductors on Silicon Interposer , 2012, IEEE Journal of Solid-State Circuits.

[15]  S. Narendra,et al.  A 233-MHz 80%-87% efficient four-phase DC-DC converter utilizing air-core inductors on package , 2005, IEEE Journal of Solid-State Circuits.

[16]  W. J. Gallagher,et al.  A Study of Current Density Limits Due to Saturation in Thin Film Magnetic Inductors for On-Chip Power Conversion , 2012, IEEE Transactions on Magnetics.