An adaptive activation energy method for predicting resin curing behavior and thermal overshoot in thick CFRP plates

[1]  Weihong Zhang,et al.  Multiscale collaborative optimization for the thermochemical and thermomechanical cure process during composite manufacture , 2022, Composites Science and Technology.

[2]  Guodong Kang,et al.  Study on Curing Kinetics and the Mechanism of Ultrasonic Curing of an Epoxy Adhesive , 2022, Polymers.

[3]  Xiaodong Chen,et al.  Microwave curing kinetics of carbon‐fiber‐reinforced epoxy composites by wet filament winding process , 2021 .

[4]  Xiaozhong Hao,et al.  Layered self‐resistance electric heating to cure thick carbon fiber reinforced epoxy laminates , 2021 .

[5]  M. Ren,et al.  Microscopic residual stresses analysis and multi-objective optimization for 3D woven composites , 2021 .

[6]  M. Z. Abdullah,et al.  Effects of processing parameters for vacuum‐bag‐only method on void content and mechanical properties of laminated composites , 2020 .

[7]  A. Poursartip,et al.  Cure-dependent microstructures and their effect on elastic properties of interlayer toughened thermoset composites , 2020 .

[8]  M. Saeb,et al.  Design, preparation, and characterization of fast cure epoxy/amine‐functionalized graphene oxide nanocomposites , 2018 .

[9]  Jianzhong Fu,et al.  Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion , 2018, Materials & Design.

[10]  T. Mesogitis,et al.  Stochastic multi-objective optimisation of the cure process of thick laminates , 2018, Composites Part A: Applied Science and Manufacturing.

[11]  Alexandros A. Skordos,et al.  Multi-objective optimisation of the cure of thick components , 2017 .

[12]  C. Bellini,et al.  A new methodology to evaluate the influence of curing overheating on the mechanical properties of thick FRP laminates , 2017 .

[13]  Sergii G. Kravchenko,et al.  Chemical and thermal shrinkage in thermosetting prepreg , 2016 .

[14]  A. Long,et al.  Stochastic simulation of the influence of cure kinetics uncertainty on composites cure , 2015 .

[15]  Timotei Centea,et al.  Out-time effects on cure kinetics and viscosity for an out-of-autoclave (OOA) prepreg: Modelling and monitoring , 2014 .

[16]  L. Giorgini,et al.  Kinetics and modeling of curing behavior for two different prepregs based on the same epoxy precursor: A case study for the industrial design of thick composites , 2013 .

[17]  M. Ghoreishy,et al.  Effect of cure kinetic simulation model on optimized thermal cure cycle for thin-sectioned composite parts , 2013 .

[18]  Michael R. Kessler,et al.  Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA , 2013 .

[19]  B. Fox,et al.  Cure kinetics and viscosity modelling of a high-performance epoxy resin film , 2013 .

[20]  Alan K. Burnham,et al.  ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data , 2011 .

[21]  Wentao Hao,et al.  Isoconversional analysis of non-isothermal curing process of epoxy resin/epoxide polyhedral oligomeric silsesquioxane composites , 2011 .

[22]  M. Esfandeh,et al.  Cure kinetics of a glass/epoxy prepreg by dynamic differential scanning calorimetry , 2011 .

[23]  A. Ureña,et al.  Improving the flexural and thermomechanical properties of amino-functionalized carbon nanotube/epoxy composites by using a pre-curing treatment , 2011 .

[24]  M. Gürü,et al.  Comparison of the curing kinetic behavior for two epoxy resin systems containing EPIKOTE 828–EPIKURE 3090 and DURATEK KLM 606A–DURATEK KLM 606B , 2007 .

[25]  K. Hu,et al.  Comparative study on the curing kinetics and mechanism of a lignin-based-epoxy/anhydride resin system , 2007 .

[26]  Nicolas Sbirrazzuoli,et al.  Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers , 2006 .

[27]  T. Chou,et al.  Microwave and conventional curing of thick-section thermoset composite laminates: Experiment and simulation , 2001 .