论文信息 - The Motor Rotor Fault Diagnosis Method Based on Linear Mixing Blind Separation Model

The Motor Rotor Fault Diagnosis Method Based on Linear Mixing Blind Separation Model

The detection precision of fault diagnosis based on frequency spectral analysis of stator current is easily restricted by noise jamming and frequency resolution. A fault diagnosis method for induction motor based on linear mixing model is proposed to resolve this problem. The fault characteristic signals are separated from the motor stator current by Fast-ICA algorithm and its amplitude is calculated according to the estimated mixing matrix. The fault diagnosis is achieved by difference of the amplitude on the normal state and the fault state of the motor. In this paper, the fault diagnosis of the broken rotor bars faults is used as an example to explain the conclusion as mentioned. Experiment result shows that the broken-rotor-bar fault can be diagnosed by the algorithm with better effect on the condition of short data block.

Fan Bu | Xin Guo Hou

[1] R. Burnett,et al. The application of modern signal processing techniques to rotor fault detection and location within three phase induction motors , 1995, Proceedings of 1995 IEEE Instrumentation and Measurement Technology Conference - IMTC '95.

[2] R. Burnett,et al. The application of modern signal processing techniques for use in rotor fault detection and location within three-phase induction motors , 1996, Signal Process..

[3] Zhang Zhe. A Summary of On-line Condition Monitoring and Fault Diagnostics for 3-phase Induction Motors , 2001 .

[4] Yu Li,et al. Application of Discrete Spectrum Correction Technology for Induction Motor Rotor Fault Diagnosis , 2014 .

[5] Wang Zhan-meng. Electric Motor Fault Diagnosis Based on Blind Source Separation , 2006 .

[6] Xinguo Hou,et al. A composite fault diagnosis method of induction motor based on blind signal processing , 2010, 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering.