Design and thermal evaluation of a social housing model conceived with bioclimatic principles and recycled aggregates

Abstract The present work discloses the design and thermal evaluation of single-family houses adapted with bioclimatic principles to tropical climates – the Vila Sustentavel complex. The architectural layout of each 2-bedroom unit embraces accessibility measures and bioclimatic strategies for energy-efficiency. The envelope embodies an innovative approach: the full replacement of natural aggregates by processed steelmaking slag in all cement-based composites (mortars, concretes and concrete blocks). These building elements were characterized physically and thermally. Subsequently, the thermal performance of the buildings was evaluated through an energy simulation using the software EnergyPlus. Results indicated that the stack effect designed in the living room promotes high ventilation rates with no energy consumption. The building elements produced with steel slag presented better thermal performance than the conventional ones, due to the high thermal inertia and low thermal conductivity of the slag. In this sense, the passive strategies proposed are replicable and energy-efficient alternatives for tropical countries.

[1]  Holger Wallbaum,et al.  The importance of life-cycle based planning in maintenance and energy renovation of multifamily buildings , 2019, Sustainable Cities and Society.

[2]  Jin-keun Kim,et al.  An experimental study on thermal conductivity of concrete , 2003 .

[3]  Susanne Bodach,et al.  Energy efficiency in social housing: Opportunities and barriers from a case study in Brazil , 2010 .

[4]  Aimar Orbe,et al.  A study on the durability of structural concrete incorporating electric steelmaking slags , 2018 .

[5]  Mohammad Iqbal Khan,et al.  Factors affecting the thermal properties of concrete and applicability of its prediction models , 2002 .

[6]  François Garde,et al.  Analysis tool for bioclimatic design strategies in hot humid climates , 2019, Sustainable cities and society.

[7]  Kevin J. Folliard,et al.  Mechanisms of Air Entrainment in Concrete , 2005 .

[8]  Diego Ruiz,et al.  Life Cycle Assessment (LCA) of building materials for the evaluation of building sustainability: the case of thermal insulation materials , 2017 .

[9]  Mohammed K. Ibrahim,et al.  Comparison of properties of steel slag and crushed limestone aggregate concretes , 2003 .

[10]  Arindam Ghosh,et al.  Solid Waste Management in Steel Industry—Challenges and Opportunities , 2019, Sustainable Waste Management: Policies and Case Studies.

[11]  W. G. Curtin,et al.  Structural Masonry Designers' Manual , 1987 .

[12]  Jacob Silva Paulsen,et al.  A life cycle energy analysis of social housing in Brazil: Case study for the program “MY HOUSE MY LIFE” , 2013 .

[13]  A. Hendry.  Masonry walls: materials and construction , 2001 .

[14]  J. Siegel,et al.  Indoor environmental quality in social housing: A literature review , 2018 .

[15]  Carlos Henggeler Antunes,et al.  Estimating energy savings from behaviours using building performance simulations , 2017 .

[16]  J. Francl,et al.  Thermal Conductivity: IX, Experimental Investigation of Effect of Porosity on Thermal Conductivity , 1954 .

[17]  Andrea Giachetta,et al.  Rethinking social housing: Behavioural patterns and technological innovations , 2017 .

[18]  J. C. Mendes,et al.  On the relationship between morphology and thermal conductivity of cement-based composites , 2019, Cement and Concrete Composites.

[19]  Maria Letizia Ruello,et al.  Electric arc furnace slag as natural aggregate replacement in concrete production , 2016 .

[20]  Giovanni Plizzari,et al.  Concrete with EAF steel slag as aggregate: A comprehensive technical and environmental characterisation , 2016 .

[21]  T. Susca.  Green roofs to reduce building energy use? A review on key structural factors of green roofs and their effects on urban climate , 2019, Building and Environment.

[22]  Michel Mouret,et al.  Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates , 2017 .

[23]  J. C. Mendes,et al.  Feasibility Study of Steel Slag Aggregates in Precast Concrete Pavers , 2016 .

[24]  Deyvid R R Gonçalves,et al.  Evaluation of the economic feasibility of a processing plant for steelmaking slag , 2016, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[25]  Ali Malkawi,et al.  Design-based natural ventilation evaluation in early stage for high performance buildings , 2019, Sustainable Cities and Society.

[26]  D. Ruch,et al.  Review of thermal conductivity in composites: Mechanisms, parameters and theory , 2016 .

[27]  Ke Sun,et al.  A holistic passive design approach to optimize indoor environmental quality of a typical residential building in Hong Kong , 2016 .

[28]  Mary Felix,et al.  The Efficiency of Using Different Outer Wall Construction Materials to Achieve Thermal Comfort in Various Climatic Zones , 2017 .

[29]  Paola Sassi,et al.  Characterisation of representative building typologies for social housing projects in Brazil and its energy performance , 2015 .

[30]  Ricardo André Fiorotti Peixoto,et al.  More eco-efficient concrete: An approach on optimization in the production and use of waste-based supplementary cementing materials , 2019, Construction and Building Materials.

[31]  Ignacio Marcos,et al.  The performance of steel-making slag concretes in the hardened state , 2014 .