Understanding the structure and dynamics of local powder packing density variations in metal additive manufacturing using set Voronoi analysis
暂无分享,去创建一个
Joshua R. Smith | C. Davies | P. Cook | A. Phua | G. Delaney
[1] C. Davies,et al. A digital twin hierarchy for metal additive manufacturing , 2022, Comput. Ind..
[2] Matteo Bugatti,et al. The intelligent recoater: a new solution for in-situ monitoring of geometric and surface defects in powder bed fusion , 2022, Additive Manufacturing Letters.
[3] Wenguang Nan,et al. Experimental investigation on the spreadability of cohesive and frictional powder , 2022, Advanced Powder Technology.
[4] P. McNally,et al. Assessing dependency of part properties on the printing location in laser-powder bed fusion metal additive manufacturing , 2022, Materials Today Communications.
[5] C. Davies,et al. Powder Spreading over Realistic Laser Melted Surfaces in Metal Additive Manufacturing , 2022, Additive Manufacturing Letters.
[6] C. Rycroft,et al. Voronoi cell analysis: The shapes of particle systems , 2022, American Journal of Physics.
[7] K. Fezzaa,et al. Effects of Particle Size Distribution with Efficient Packing on Powder Flowability and Selective Laser Melting Process , 2022, Materials.
[8] A. Yu,et al. Powder deposition mechanism during powder spreading with different spreader geometries in powder bed fusion additive manufacturing , 2021, Powder Technology.
[9] M. H. Sehhat,et al. Powder spreading in laser-powder bed fusion process , 2021, Granular Matter.
[10] C. Davies,et al. The effect of recoater geometry and speed on granular convection and size segregation in powder bed fusion , 2021, Powder Technology.
[11] A. Hassanpour,et al. Combined effect of particle size and surface cohesiveness on powder spreadability for additive manufacturing , 2021 .
[12] P. Cleary,et al. A Coupled DEM/SPH Computational Model to Simulate Microstructure Evolution in Ti-6Al-4V Laser Powder Bed Fusion Processes , 2021, Metals.
[13] A. Yu,et al. Effects of spreader geometry on powder spreading process in powder bed additive manufacturing , 2021 .
[14] Xiaogang Wang,et al. Experimental analysis of powder layer quality as a function of feedstock and recoating strategies , 2021 .
[15] R. Hudák,et al. The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing , 2021, The International Journal of Advanced Manufacturing Technology.
[16] Steven Eric Zeltmann,et al. Effect of particle size distribution on the packing of powder beds: A critical discussion relevant to additive manufacturing , 2020, Materials Today Communications.
[17] C. Körner,et al. Measuring procedures for surface evaluation of additively manufactured powder bed-based polymer and metal parts , 2020, Measurement Science and Technology.
[18] Wentao Yan,et al. Packing quality of powder layer during counter-rolling-type powder spreading process in additive manufacturing , 2020 .
[19] T. Pöschel,et al. Packings of micron-sized spherical particles – Insights from bulk density determination, X-ray microtomography and discrete element simulations , 2020 .
[20] V. Brailovski,et al. Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy , 2020 .
[21] Anthony B. Murphy,et al. Simulation of melt pool behaviour during additive manufacturing: Underlying physics and progress , 2020 .
[22] Wentao Yan,et al. Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling , 2019, Acta Materialia.
[23] Sanjay B. Joshi,et al. On the development of powder spreadability metrics and feedstock requirements for powder bed fusion additive manufacturing , 2019, Additive Manufacturing.
[24] M. Brandt,et al. Measurement of actual powder layer height and packing density in a single layer in selective laser melting , 2019, Additive Manufacturing.
[25] Matteo Seita,et al. A high-resolution and large field-of-view scanner for in-line characterization of powder bed defects during additive manufacturing , 2019, Materials & Design.
[26] Wolfgang A. Wall,et al. Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing , 2018, Journal of Materials Processing Technology.
[27] M. Brochu,et al. A Comprehensive Approach to Powder Feedstock Characterization for Powder Bed Fusion Additive Manufacturing: A Case Study on AlSi7Mg , 2018, Materials.
[28] Usman Ali,et al. On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes , 2018, Materials & Design.
[29] Anton du Plessis,et al. X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications , 2018, 3D Printing and Additive Manufacturing.
[30] S. Nai,et al. The role of powder layer thickness on the quality of SLM printed parts , 2018, Archives of Civil and Mechanical Engineering.
[31] Xinhua Wu,et al. Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components , 2018 .
[32] Sina Haeri,et al. Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations , 2017 .
[33] C. Emmelmann,et al. Relationship between powder characteristics and part properties in laser beam melting of Ti–6Al–4V, and implications on quality , 2017 .
[34] F. Schaller,et al. Pomelo, a tool for computing Generic Set Voronoi Diagrams of Aspherical Particles of Arbitrary Shape , 2017, 1703.03643.
[35] Matthias Schröter,et al. Analyzing X-ray tomographies of granular packings. , 2016, The Review of scientific instruments.
[36] S. Haeri,et al. Discrete element simulation and experimental study of powder spreading process in additive manufacturing , 2017 .
[37] T. Bauer,et al. Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing , 2016 .
[38] Marc Holmes,et al. Powder Bed Layer Characteristics: The Overseen First-Order Process Input , 2016, Metallurgical and Materials Transactions A.
[39] T. Pöschel,et al. Particle-based simulation of powder application in additive manufacturing , 2016 .
[40] Hans Jürgen Herrmann,et al. Analysis of the velocity field of granular hopper flow , 2015, 1507.06223.
[41] Paul W. Cleary,et al. Non-universal Voronoi cell shapes in amorphous ellipsoid packs , 2015, 1504.02737.
[42] A. Rubenchik,et al. Calculation of laser absorption by metal powders in additive manufacturing. , 2015, Applied optics.
[43] Brian Armstrong,et al. The Application of Powder Rheology in Additive Manufacturing , 2015 .
[44] M. Schröter,et al. Local origin of global contact numbers in frictional ellipsoid packings. , 2013, Physical review letters.
[45] Carolin Körner,et al. Fundamental consolidation mechanisms during selective beam melting of powders , 2013 .
[46] T. Aste,et al. Set Voronoi diagrams of 3D assemblies of aspherical particles , 2013 .
[47] C. Körner,et al. Mesoscopic simulation of selective beam melting processes , 2011 .
[48] Paul W Cleary,et al. Defining random loose packing for nonspherical grains. , 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.
[49] Gideon Levy,et al. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts , 2011 .
[50] Geoff P. Delaney,et al. Disordered spherical bead packs are anisotropic , 2010 .
[51] Paul W. Cleary,et al. The packing properties of superellipsoids , 2010 .
[52] Chris H Rycroft,et al. VORO++: a three-dimensional voronoi cell library in C++. , 2009, Chaos.
[53] H. Jaeger,et al. Granular solids, liquids, and gases , 1996 .
[54] Steven Fortune,et al. A sweepline algorithm for Voronoi diagrams , 1986, SCG '86.