A Study on the Susceptibility of PLA Biocomposites to Drilling

Wood–plastic composites (WPCs) increase the range of applications of materials by creating new material solutions. As part of this research, PLA (polylactic acid)- and HDPE (high-density polyethylene)-based composites were manufactured. Softwood sawdust or conifer bark with different sizes (large and small) were used as filler. In selected cases, the addition of 3% additives, such as calcium oxide in the case of PLA or polyethylene-graft-maleic anhydride in the case of HDPE, were tested. The manufactured composites were examined for their density profile and their susceptibility to drilling, defined by the value of the axial force occurring during drilling. The obtained results revealed that the type of matrix had the greatest influence on the axial forces during drilling. Regardless of the composite formulation, composites based on PLA had 25% to 56% higher axial forces during drilling than those based on HDPE. Furthermore, increasing the proportion of lignocellulosic fillers resulted in a decrease in the value of axial forces during drilling, with PLA composites experiencing a greater decrease than HDPE composites. The type and size of the filler had a minor impact on the axial force values during drilling. The statistical analysis indicated that the additives had a greater influence on HDPE than on PLA.

[1]  M. Nowacka,et al.  Influence of a bark-filler on the properties of PLA biocomposites , 2021, Journal of Materials Science.

[2]  P. Borysiuk,et al.  Selected properties of flat-pressed wood-polymer composites for high humidity conditions , 2020 .

[3]  Michael Carus,et al.  Biocomposites, find the real alternative to plastic – An examination of biocomposites in the market , 2019, Reinforced Plastics.

[4]  M. Barczewski,et al.  Cork-wood hybrid filler system for polypropylene and poly(lactic acid) based injection molded composites. Structure evaluation and mechanical performance , 2019, Composites Part B: Engineering.

[5]  P. Borysiuk,et al.  Influence of the filler on the density profile of wood polymer composites , 2019, Annals of WULS, Forestry and Wood Technology.

[6]  K. Debnath,et al.  Hole making in natural fiber-reinforced polylactic acid laminates , 2017 .

[7]  Robert Langer,et al.  Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review. , 2016, Advanced drug delivery reviews.

[8]  Debes Bhattacharyya,et al.  Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review , 2016, Materials.

[9]  J. Zajac,et al.  Short-Term Testing of Cutting Materials Using the Method of Interrupted Cut , 2014 .

[10]  Peter Michalik,et al.  Machining of Wood Plastic Composite (Pilot Experiment) , 2012 .

[11]  J. Niinimäki,et al.  Processing of wood chip–plastic composites: effect on wood particle size, microstructure and mechanical properties , 2011 .

[12]  M. Wolcott,et al.  Damage of the cell wall during extrusion and injection molding of wood plastic composites , 2010 .

[13]  P. Perré,et al.  Effects of composite processing methods on wood particle development and length distribution: consequences on mechanical properties of wood-thermoplastic composites. , 2010 .

[14]  Amir Nourbakhsh,et al.  Characteristics of wood-fiber plastic composites made of recycled materials. , 2009, Waste management.

[15]  Mehdi Tajvidi,et al.  Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard , 2008 .

[16]  J. Markarian.  Biopolymers present new market opportunities for additives in packaging , 2008 .

[17]  M. Cheung,et al.  Fabrication and interfacial modification of wood/recycled plastic composite materials , 2008 .

[18]  H. Meng,et al.  PHYSICAL AND BENDING PROPERTIES OF INJECTION MOULDED WOOD PLASTIC COMPOSITES BOARDS , 2008 .

[19]  A. Klyosov,et al.  Wood-Plastic Composites , 2007 .

[20]  A. Błędzki,et al.  A comparison of compounding processes and wood type for wood fibre—PP composites , 2005 .

[21]  B. Riedl,et al.  Lignocellulosic composites with grafted polystyrene interfaces , 2005 .

[22]  C. Gozdecki,et al.  Wood-based panels as a filler of wood-plastic composites , 2005 .

[23]  Han-Seung Yang,et al.  Creep behavior and manufacturing parameters of wood flour filled polypropylene composites , 2004 .

[24]  Hsu-Chiang Kuan,et al.  Processability, morphology and mechanical properties of wood flour reinforced high density polyethylene composites , 2003 .

[25]  Y. Mai,et al.  Morphology and mechanical properties of reconstituted wood board waste-polyethylene composites , 2003 .

[26]  R. Li,et al.  A FRACTURE MECHANICS STUDY OF POLYPROPYLENE–WOOD FLOURS BLENDS , 2001 .