Systemy elektroniczne dla toru odczytu danych w eksperymencie CBM

[1]  Ralf Rapp,et al.  The CBM physics book : Compressed baryonic matter in laboratory experiments , 2011 .

[2]  Pawel Grybos,et al.  Noise optimization of the time and energy measuring ASIC for silicon tracking system , 2015, 2015 22nd International Conference Mixed Design of Integrated Circuits & Systems (MIXDES).

[3]  Krzysztof Kasinski,et al.  Dual-stage, Time-over-Threshold based prototype readout ASIC for silicon microstrip sensors , 2015, Microelectron. J..

[4]  Ryszard S. Romaniuk,et al.  Selection of hardware platform for CBM Common Readout Interface , 2017, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[5]  Robert Szczygiel,et al.  A protocol for hit and control synchronous transfer for the front-end electronics at the CBM experiment , 2016 .

[6]  Wojciech M. Zabolotny.  Low latency protocol for transmission of measurement data from FPGA to Linux computer via 10 Gbps Ethernet link , 2015, ArXiv.

[7]  Robert Szczygiel,et al.  Interface and protocol development for STS read-out ASIC in the CBM experiment at FAIR , 2014, Other Conferences.

[8]  Rafal Kleczek,et al.  Analog front-end design of the STS/MUCH-XYTER2—full size prototype ASIC for the CBM experiment , 2017 .

[9]  Krzysztof Kasinski,et al.  Time and energy measurement ASIC for microstrip detectors with two-level reset system based on the Time-over-Threshold technique , 2014, 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC).

[10]  Wojciech M. Zabołotny.  Dual port memory based Heapsort implementation for FPGA , 2011, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[11]  Robert Szczygiel,et al.  Back-end and interface implementation of the STS-XYTER2 prototype ASIC for the CBM experiment , 2016 .

[12]  Pawel Grybos,et al.  STS-XYTER, a high count-rate self-triggering silicon strip detector readout IC for high resolution time and energy measurements , 2014, 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC).

[13]  Alessandro Thea,et al.  IPbus: a flexible Ethernet-based control system for xTCA hardware , 2015 .

[14]  Ryszard S. Romaniuk,et al.  CBM Experiment local and global implications , 2016 .

[15]  V. Friese.  Perspectives for Heavy-ion Collisions at Future Facilities , 2017 .

[16]  Krzysztof Kasinski,et al.  System-level considerations for the front-end readout ASIC in the CBM experiment from the power supply perspective , 2017 .

[17]  Kenneth Wyllie,et al.  Test bench development for the radiation Hard GBTX ASIC , 2015 .

[18]  Wojciech M. Zabołotny,et al.  Optimized ethernet transmission of acquired data from FPGA to embedded system , 2013, Other Conferences.

[19]  Ryszard S. Romaniuk,et al.  Design of versatile ASIC and protocol tester for CBM readout system , 2017 .

[20]  Ryszard S. Romaniuk,et al.  Versatile prototyping platform for Data Processing Boards for CBM experiment , 2016 .

[21]  Wojciech M. Zabołotny,et al.  Data processing boards design for CBM experiment , 2014, Other Conferences.

[22]  G. Kasprowicz,et al.  Time and clock synchronization with AFCK for CBM , 2015, Symposium on Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments (WILGA).

[23]  Kenji Fukushima,et al.  The phase diagram of dense QCD , 2010, 1005.4814.

[24]  Adrian Byszuk,et al.  High-speed Concentration of Sorted Data Streams for HEP Experiments , 2018 .