Remote Optical Thermography Detection Method and System for Silicone Polymer Insulating Materials Used in Power Industry

Live detection of composite insulating materials in electrical equipment is highly demanded for the reliability and safety of the power system. This article proposes a remote optical thermography detection method and system for detecting defects in silicone polymer materials with the advantages of quick and simple operation, safety, visual results, and automatic remote measurement. First, the remote optical thermography detection system was established. Then, silicone polymer insulating materials with typical defects were tested by the proposed system at a long distance of 5 m. Images sequence processing techniques, including fast Fourier transform, principal component analysis, independent component analysis, and partial least-squares regression, were used to enhance defect contrast and reduce background noises. The experiment results have shown that defects with the size of 2 mm in silicone polymer insulating materials can be accurately detected at a long distance of 5 m by the proposed system. Finally, the performance of these adopted processing techniques in remote detection was quantitatively evaluated by two metrics, contrast and signal-to-noise ratio, to provide a reference for industrial applications of thermography detection at a long distance.

[1]  Bernhard G. Zagar,et al.  Measurement of Paint Coating Thickness by Thermal Transient Method , 2009, IEEE Transactions on Instrumentation and Measurement.

[2]  Liming Wang,et al.  Nondestructive Visualization and Quantitative Characterization of Defects in Silicone Polymer Insulators Based on Laser Shearography , 2019, IEEE Sensors Journal.

[3]  Yang Wang,et al.  Independent component analysis enhanced pulse thermography for high silicon oxygen phenolic resin (HSOPR) sheet with subsurface defects , 2018, Infrared Physics & Technology.

[4]  S. Gubanski,et al.  Diagnostic Methods for Outdoor Polymeric Insulators , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[5]  Liming Wang,et al.  Detecting Defects in Porcelain Postinsulator Coated With Room Temperature Vulcanized Silicone Rubber by Pulsed Thermography , 2019, IEEE Transactions on Instrumentation and Measurement.

[6]  M. Ziegler,et al.  Laser-projected photothermal thermography using thermal wave field interference for subsurface defect characterization , 2016 .

[7]  Hengkun Xie,et al.  Application of ultrasonic pulse-echo method to insulation condition diagnosis for large generators , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[8]  Andreas Mandelis,et al.  Thermophotonic radar imaging: An emissivity-normalized modality with advantages over phase lock-in thermography , 2011 .

[9]  V. P. Vavilov,et al.  Review of pulsed thermal NDT: Physical principles, theory and data processing , 2015 .

[10]  P. Baranowski,et al.  Detection of early bruises in apples using hyperspectral data and thermal imaging , 2012 .

[11]  Xavier Maldague,et al.  Optimization of pulsed thermography inspection by partial least-squares regression , 2014 .

[12]  P. Amaro,et al.  X-ray fluorescence as a condition monitoring tool for copper and corrosive sulphur species in insulating oil , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  Andreas Mandelis,et al.  Thermal coherence tomography using match filter binary phase coded diffusion waves. , 2011, Physical review letters.

[14]  Liming Wang,et al.  Quantitative Detection of Interfacial Air Gap in Insulation Equipment Based on Terahertz Wave Contrast Method , 2019, IEEE Transactions on Instrumentation and Measurement.

[15]  Guixin Zhang,et al.  Charge accumulation patterns on spacer surface in HVDC gas-insulated system: Dominant uniform charging and random charge speckles , 2017, IEEE Transactions on Dielectrics and Electrical Insulation.

[16]  Krishnendu Chatterjee,et al.  Image Enhancement in Transient Lock-In Thermography Through Time Series Reconstruction and Spatial Slope Correction , 2012, IEEE Transactions on Instrumentation and Measurement.

[17]  Ayman H. El-Hag,et al.  Outdoor Insulators Testing Using Artificial Neural Network-Based Near-Field Microwave Technique , 2014, IEEE Transactions on Instrumentation and Measurement.

[18]  Philip J. Withers,et al.  Imaging and analysis techniques for electrical trees using X-ray computed tomography , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[19]  Hongwei Mei,et al.  Non-destructive testing of internal defects in composite insulators using microwave technique , 2015, 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP).

[20]  Shuyi Cheng,et al.  Location of partial discharge in transformer oil using circular array of ultrasonic sensors , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[21]  Xavier Maldague,et al.  Optical excitation thermography for twill/plain weaves and stitched fabric dry carbon fibre preform inspection , 2018 .

[22]  M. Kumosa,et al.  Resistance to brittle fracture of glass reinforced polymer composites used in composite (nonceramic) insulators , 2005, IEEE Transactions on Power Delivery.

[23]  Fuzeng Zhang,et al.  Ultrasonic phased array detection of internal defects in composite insulators , 2016, IEEE Transactions on Dielectrics and Electrical Insulation.

[24]  Qiang Wang,et al.  Inversion Algorithm to Calculate Charge Density on Solid Dielectric Surface Based on Surface Potential Measurement , 2017, IEEE Transactions on Instrumentation and Measurement.

[25]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[26]  Liang Cheng,et al.  Transient Thermal Behavior of Eddy-Current Pulsed Thermography for Nondestructive Evaluation of Composites , 2013, IEEE Transactions on Instrumentation and Measurement.

[27]  Rajkumar Roy,et al.  Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography , 2019, IEEE Transactions on Industrial Informatics.