NUMERICAL AND EXPERIMENTAL ASSESSMENT OF THE TOTAL RESISTANCE OF A YACHT
暂无分享,去创建一个
[1] Y. Wang,et al. UNCERTAINTY ANALYSIS OF SHIP MODEL RESISTANCE TEST IN ACTUAL SEAS , 2020 .
[2] S. Spence,et al. A comprehensive review on countermeasures for CO2 emissions from ships , 2020 .
[3] Wentao Liu,et al. Resistance reduction technology research of high speed ships based on a new type of bow appendage , 2020, Ocean Engineering.
[4] Yihan Zhang,et al. NUMERICAL AND EXPERIMENTAL STUDY ON RESISTANCE OF ASYMMETRIC CATAMARAN WITH DIFFERENT LAYOUTS , 2020, Brodogradnja.
[5] Nastia Degiuli,et al. Impact of biofilm on the resistance characteristics and nominal wake , 2020, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment.
[6] H. Ren,et al. Comparative study on fluid dynamic behavior and slamming loads of two bow-flare sections entering into water , 2020 .
[7] Abbas Dashtimanesh,et al. HYDRODYNAMIC CHARACTERISTICS OF TUNNELED PLANING HULLS IN CALM WATER , 2020, Brodogradnja.
[8] Valerio Ruggiero,et al. New interactive method to determine parameters for large motor yachts stability , 2019, International Journal on Interactive Design and Manufacturing (IJIDeM).
[9] Erkan Gunpinar,et al. GenYacht: An interactive generative design system for computer-aided yacht hull design , 2019, Ocean Engineering.
[10] K. Niklas,et al. Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experiments , 2019, Ocean Engineering.
[11] Karol Niklas,et al. Full scale CFD seakeeping simulations for case study ship redesigned from V-shaped bulbous bow to X-bow hull form , 2019, Applied Ocean Research.
[12] Inwon Lee,et al. Effect of bow hull forms on the resistance performance in calm water and waves for 66k DWT bulk carrier , 2019, International Journal of Naval Architecture and Ocean Engineering.
[13] Nastia Degiuli,et al. Numerical and experimental assessment of nominal wake for a bulk carrier , 2018, Journal of Marine Science and Technology.
[14] Ivana Martić,et al. Assessment of hydrodynamic characteristics of a full-scale ship at different draughts , 2018 .
[15] Jin-Won Yu,et al. Hull form design for the fore-body of medium-sized passenger ship with gooseneck bulb , 2017 .
[16] Ivana Martić,et al. NUMERICAL SIMULATION OF VISCOUS FLOW AROUND A TANKER MODEL , 2017 .
[17] Erkan Gunpinar,et al. A novel design framework for generation and parametric modification of yacht hull surfaces , 2017 .
[18] Jae-Hoon Lee,et al. Experimental investigation on the added resistance of modified KVLCC2 hull forms with different bow shapes , 2017 .
[19] Nastia Degiuli,et al. Total resistance prediction of an intact and damaged tanker with flooded tanks in calm water , 2017 .
[20] Andrea Di Mascio,et al. Investigation and modelling of the turbulent wall pressure fluctuations on the bulbous bow of a ship , 2016 .
[21] Yavuz Ozdemir,et al. A NUMERICAL APPLICATION TO PREDICT THE RESISTANCE AND WAVE PATTERN OF KRISO CONTAINER SHIP , 2016 .
[22] Chi Yang,et al. Hull form optimization of a cargo ship for reduced drag , 2016 .
[23] Andrea Di Mascio,et al. Analysis of the interference effects for high-speed catamarans by model tests and numerical simulations , 2011 .
[24] A M Kracht,et al. DESIGN OF BULBOUS BOWS , 1978 .
[25] Luís Eça,et al. Verification and Validation exercises for the flow around the KVLCC2 tanker at model and full-scale Reynolds numbers , 2017 .
[26] Ivana Martić,et al. Mesh Sensitivity Analysis for Numerical Simulation of a Damaged Ship Model , 2017 .