Novel measuring method for prepreg processability of oxide fiber ceramic matrix composites

[1]  W. Krenkel,et al.  Short fiber‐reinforced oxide fiber composites , 2021, International Journal of Applied Ceramic Technology.

[2]  Wei Zhou,et al.  Fiber orientation dependence of tribological behavior of short carbon fiber reinforced ceramic matrix composites , 2021 .

[3]  W. Krenkel,et al.  Novel prepreg manufacturing process for oxide fiber composites , 2020 .

[4]  W. Krenkel,et al.  Tailored macro-pores during the formation of C/C-SiC via liquid phase pyrolysis , 2020 .

[5]  K. Rezwan,et al.  All-oxide ceramic matrix composites (OCMC) based on low cost 3M Nextel™ 610 fabrics , 2020 .

[6]  D. Meiners,et al.  Prepreg tack: A review of mechanisms, measurement, and manufacturing implication , 2020 .

[7]  D. Meiners,et al.  Interaction of process parameters and material properties with regard to prepreg tack in automated lay-up and draping processes , 2019, Composites Part A: Applied Science and Manufacturing.

[8]  K. Rezwan,et al.  Obtaining complex-shaped oxide ceramic composites via ionotropic gelation , 2018, Journal of the American Ceramic Society.

[9]  W. Krenkel,et al.  CMC jackets for metallic pipes – A novel approach to prevent the creep deformation of thermo-mechanically loaded metals , 2018, Journal of the European Ceramic Society.

[10]  É. Martin,et al.  Microstructure and mechanical behaviour of a Nextel™610/alumina weak matrix composite subjected to tensile and compressive loadings , 2017 .

[11]  Gabriel F. Nunes,et al.  Microstructure and flexural properties of multilayered fiber-reinforced oxide composites fabricated by a novel lamination route , 2015 .

[12]  T. Mah,et al.  Reduced Cracking in Oxide Fiber‐Reinforced Oxide Composites via Freeze‐Dry Processing , 2015 .

[13]  W. Krenkel,et al.  Novel oxide fiber composites by freeze casting , 2014 .

[14]  Richard Crossley,et al.  Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing , 2013 .

[15]  Gabriel F. Nunes,et al.  Production of Oxide Ceramic Matrix Composites by a Prepreg Technique , 2012 .

[16]  A. Béakou,et al.  Experimental Analysis of Prepreg Tack , 2010 .

[17]  Stefan Hackemann,et al.  WHIPOX®: Ein faserverstärkter oxidkeramischer Werkstoff für Hochtemperatur– Langzeitanwendungen , 2007 .

[18]  Reinhard A. Simon.  Progress in Processing and Performance of Porous‐Matrix Oxide/Oxide Composites , 2005 .

[19]  Carlos G. Levi,et al.  Processing and Performance of an All‐Oxide Ceramic Composite , 2005 .

[20]  F. Lange,et al.  Fabrication and testing of all-oxide CFCC tubes , 2003 .

[21]  D. Wilson,et al.  High performance oxide fibers for metal and ceramic composites , 2001 .

[22]  V. Michaud,et al.  Infiltration processing of fibre reinforced composites: governing phenomena , 2001 .

[23]  Tsu-Wei Chou,et al.  A nonlinear compaction model for fibrous preforms , 2001 .

[24]  H. Schneider,et al.  Damage tolerant oxide/oxide fiber laminate composites , 2000 .

[25]  T. Tanimoto.  Continuous-fibre CMC fabrication using pre-impregnated sheets , 1999 .

[26]  Frank W. Zok,et al.  The physics and mechanics of fibre-reinforced brittle matrix composites , 1994, Journal of Materials Science.

[27]  Timothy G. Gutowski,et al.  The 3-D Deformation Behavior of a Lubricated Fiber Bundle , 1992 .

[28]  J. Seferis,et al.  Analysis and characterization of prepreg tack , 1992 .

[29]  T. Gutowski,et al.  The Elastic Deformation of Lubricated Carbon Fiber Bundles: Comparison of Theory and Experiments , 1992 .

[30]  S. J. Wineman,et al.  Consolidation Experiments for Laminate Composites , 1987 .

[31]  K. Rezwan,et al.  Assessment of three oxide/oxide ceramic matrix composites: Mechanical performance and effects of heat treatments , 2015 .

[32]  H. Al-Qureshi,et al.  Fiber-Matrix Compatibility in an All-Oxide Ceramic Composite with RBAO Matrix , 2012 .

[33]  F. Zok,et al.  Mechanical properties of porous-matrix ceramic composites , 2001 .

[34]  J. Yang,et al.  Microstructural design of stable porous matrices for all-oxide ceramic composites , 1999 .

[35]  J. Summerscales,et al.  The compressibility of a reinforcement fabric , 1995 .