Observations on the release of gas-phase potassium during the combustion of single particles of biomass

Abstract One of the more significant characteristics of solid biomass fuels as compared to coal is the quantity of potassium that they contain. Potassium content influences ash deposition and corrosion mechanisms in furnaces, the effects of which may differ depending on phase transformations of potassium species in the gas phase and condensed phase. The fate of potassium from the fuel during the combustion process is therefore an important concern. To investigate this, an experimental method is presented in which the release patterns from single particles of various biomass fuels are measured by use of flame emission spectroscopy implemented using a custom-built photo-detector device. Single particles of fuel are combusted in a methane flame with a gas temperature of ∼1800 K. The observed potassium release patterns for thirteen solid biomass materials are presented. The data are analyzed to examine the relationships between: the level of potassium in the fuel particle; the fraction of potassium released at each stage of combustion and the peak rate of release of potassium to gas-phase during combustion. Correlations between these quantities are identified with key trends, patterns and differences highlighted. The analyses provide useful information for the development and validation of modelling of potassium release during combustion of biomass.

[1]  Richard W. Bryers,et al.  Fireside slagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels , 1996 .

[2]  D. Dayton,et al.  Direct Observation of Alkali Vapor Release during Biomass Combustion and Gasification. 1. Application of Molecular Beam/Mass Spectrometry to Switchgrass Combustion , 1995 .

[3]  Mikko Hupa,et al.  Chemical forms of ash-forming elements in woody biomass fuels , 2010 .

[4]  Ingwald Obernberger,et al.  Quantification of the release of inorganic elements from biofuels , 2007 .

[5]  T. Blomberg.  A thermodynamic study of the gaseous potassium chemistry in the convection sections of biomass fired boilers , 2011 .

[6]  B. Leckner,et al.  Distribution of potassium, chlorine, and sulfur between solid and vapor phases during combustion of wood chips and coal , 2003 .

[7]  P. Glarborg,et al.  Release to the Gas Phase of Inorganic Elements during Wood Combustion. Part 2: Influence of Fuel Composition , 2008 .

[8]  Q. Song,et al.  Temporal release of potassium from pinewood particles during combustion , 2015 .

[9]  Jenny M. Jones,et al.  Influence of alkali metals on the kinetics of the thermal decomposition of biomass , 2012 .

[10]  K. W. Ragland,et al.  Wood ash composition as a function of furnace temperature , 1993 .

[11]  P. Monkhouse.  On-line spectroscopic and spectrometric methods for the determination of metal species in industrial processes☆ , 2011 .

[12]  Jenny M. Jones,et al.  Commodity Fuels from Biomass through Pretreatment and Torrefaction: Effects of Mineral Content on Torrefied Fuel Characteristics and Quality , 2012 .

[13]  Sung Su Kim,et al.  Release of potassium and sodium species during combustion of various rank coals, biomass, sludge and peats , 2012 .

[14]  P. Rodrigues,et al.  Phase diagrams of alkali halides using two interaction models: a molecular dynamics and free energy study. , 2007, The Journal of chemical physics.

[15]  Jenny M. Jones,et al.  Single particle flame-combustion studies on solid biomass fuels , 2015 .

[16]  Shengqiang Shen,et al.  Release and transformation of alkali metals during co-combustion of coal and sulfur-rich wheat straw , 2014 .

[17]  G. Nathan,et al.  Sodium and Potassium Released from Burning Particles of Brown Coal and Pine Wood in a Laminar Premixed Methane Flame Using Quantitative Laser-Induced Breakdown Spectroscopy , 2011, Applied spectroscopy.

[18]  Wenzhi Du,et al.  Further study on biomass ash characteristics at elevated ashing temperatures: the evolution of K, Cl, S and the ash fusion characteristics. , 2013, Bioresource technology.

[19]  Zhihua Wang,et al.  LIBS measurements and numerical studies of potassium release during biomass gasification , 2015 .

[20]  N. Demartini,et al.  In Situ Measurement Technique for Simultaneous Detection of K, KCl, and KOH Vapors Released during Combustion of Solid Biomass Fuel in a Single Particle Reactor , 2014, Applied spectroscopy.

[21]  V. S. Iorish,et al.  Thermodynamic Properties of Alkali Metal Hydroxides. Part 1. Lithium and Sodium Hydroxides , 1996 .

[22]  Peter Arendt Jensen,et al.  Transformation and Release to the Gas Phase of Cl, K, and S during Combustion of Annual Biomass , 2004 .

[23]  Mohamed Pourkashanian,et al.  An investigation of the thermal and catalytic behaviour of potassium in biomass combustion , 2007 .

[24]  Jenny M. Jones,et al.  A review of the mitigation of deposition and emission problems during biomass combustion through washing pre-treatment , 2015 .

[25]  L.P.L.M. Rabou,et al.  Tar in Biomass Producer Gas, the Energy research Centre of The Netherlands (ECN) Experience: An Enduring Challenge , 2009 .

[26]  Peter Glarborg,et al.  Release to the Gas Phase of Inorganic Elements during Wood Combustion. Part 1: Development and Evaluation of Quantification Methods , 2006 .