Helicopter-based laser scanning: a method for quantitative analysis of large-scale sedimentary architecture

Abstract Studies of large-scale sedimentary architecture are mainly based on the interpretation of two-dimensional photomosaics. This method cannot account for the natural rugosity of outcrop exposures, introducing errors in the measurement of geobody sizes and orientations. In the past, three-dimensional outcrop studies have relied on time-intensive fieldwork, with irregular sampling and low geometric accuracy. More recently, terrestrial laser scanning, or LiDAR (Light Detection and Ranging), has been widely applied to small-scale outcrops, but range and accessibility preclude its usage on larger-scale outcrops. Oblique helicopter-based laser scanning, however, allows the collection of tens of kilometres of outcrop sections in a relatively short time frame. In this paper, a procedure for collecting and processing such virtual outcrop data is outlined, and the application of the technique for extracting dimensions of fluvial geobodies from two large and otherwise inaccessible outcrops from Utah is presented. The results are compared to interpretations from more conventional photomosaicking of the same outcrops. Results show that the use of helicopter-based laser scanning enables geoscientists to rapidly acquire georeferenced data that can then be used for sedimentological interpretation and analysis on reservoir scales. It is concluded that helicopter-based laser scanning promotes sedimentological research and is well suited to capturing quantitative geometrical data from large outcrops.

[1]  Gary S. Weissmann,et al.  Large Distributive Fluvial Systems: Characteristics, Distribution, and Controls on Development , 2010 .

[2]  J. Bhattacharya.  Practical problems in the application of the sequence stratigraphic method and key surfaces: integrating observations from ancient fluvial–deltaic wedges with Quaternary and modelling studies , 2011 .

[3]  David Hodgetts,et al.  A new approach for outcrop characterization and geostatistical analysis of a low-sinuosity fluvial-dominated succession using digital outcrop models: Upper Triassic Oukaimeden Sandstone Formation, central High Atlas, Morocco , 2009 .

[4]  R. Labourdette.  Stratigraphy and static connectivity of braided fluvial deposits of the lower Escanilla Formation, south central Pyrenees, Spain , 2011 .

[5]  A. Miall.  The architecture of fluvial-deltaic sequences in the Upper Mesaverde Group (Upper Cretaceous), Book Cliffs, Utah , 1993, Geological Society, London, Special Publications.

[6]  Richard R. Jones,et al.  Characterization of fluvial architectural elements using a three-dimensional outcrop data set: Escanilla braided system, South-Central Pyrenees, Spain , 2007 .

[7]  S. Flint,et al.  Interfluve sequence boundaries in the Grassy Member, Book Cliffs, Utah: criteria for recognition and implications for subsurface correlation , 1996, Geological Society, London, Special Publications.

[8]  A. Hartley,et al.  Controls on the Architecture of a Triassic Sandy Fluvial System, Wolfville Formation, Fundy Basin, Nova Scotia, Canada: Implications for the Interpretation and Correlation of Ancient Fluvial Successions , 2010 .

[9]  Sumit Ghosh,et al.  A multistorey sandstone complex in the Himalayan Foreland Basin, NW Himalaya, India , 2004 .

[10]  A. Martinius,et al.  The development of fluvial stochastic modelling in the Norwegian oil industry: A historical review, subsurface implementation and future directions , 2007 .

[11]  J. Howell,et al.  Modelling of dipping clinoform barriers within deltaic outcrop analogues from the Cretaceous Western Interior Basin, USA , 2008 .

[12]  John A. Howell,et al.  From outcrop to reservoir simulation model: Workflow and procedures , 2007 .

[13]  J. Bhattacharya,et al.  NO CHANGE IN FLUVIAL STYLE ACROSS A SEQUENCE BOUNDARY, CRETACEOUS BLACKHAWK AND CASTLEGATE FORMATIONS OF CENTRAL UTAH, U.S.A. , 2005 .

[14]  David Hodgetts,et al.  Applications of digital outcrop models: two fluvial case studies from the Triassic Wolfville Fm., Canada and Oukaimeden Sandstone Fm., Morocco , 2009 .

[15]  Gary J. Hampson,et al.  Along-Strike and Down-Dip Variations in Shallow-Marine Sequence Stratigraphic Architecture: Upper Cretaceous Star Point Sandstone, Wasatch Plateau, Central Utah, U.S.A. , 2011 .

[16]  R. Flores,et al.  Paleogeographic controls of coal accumulation, Cretaceous Blackhawk Formation and Star Point Sandstone, Wasatch Plateau, Utah , 1984 .

[17]  A. Miall.  Description and interpretation of fluvial deposits: a critical perspective , 1995 .

[18]  R. G. Young.  SEDIMENTARY FACIES AND INTERTONGUING IN THE UPPER CRETACEOUS OF THE BOOK CLIFFS, UTAH-COLORADO , 1955 .

[19]  Jamie K. Pringle,et al.  Topics: Virtual geological outcrops – fieldwork and analysis made less exhaustive? , 2004 .

[20]  J. B. Reeside,et al.  Cretaceous and Tertiary Formations of the Wasatch Plateau, Utah , 1925 .

[21]  Louis A. Scuderi,et al.  Fluvial form in modern continental sedimentary basins: Distributive fluvial systems , 2010 .

[22]  Jan Skaloud,et al.  Development and Experiences with A Fully-Digital Handheld Mapping System Operated from A Helicopter , 2004 .

[23]  G. Davis,et al.  Late Cretaceous–early Tertiary Laramide deformation of the northern Colorado Plateau, Utah and Colorado , 2003 .

[24]  G. Pedersen,et al.  Architecture of vertically stacked fluvial deposits, Atane Formation, Cretaceous, Nuussuaq, central West Greenland , 2010 .

[25]  S. Buckley,et al.  Controls on large‐scale patterns of fluvial sandbody distribution in alluvial to coastal plain strata: Upper Cretaceous Blackhawk Formation, Wasatch Plateau, Central Utah, USA , 2012 .

[26]  I. Trinks,et al.  Unlocking the spatial dimension: digital technologies and the future of geoscience fieldwork , 2005, Journal of the Geological Society.

[27]  J. Alexander.  A discussion on the use of analogues for reservoir geology , 1993, Geological Society, London, Special Publications.

[28]  S. Raza,et al.  Intermediate-scale architectural features of the fluvial Chinji Formation (Miocene), Siwalik Group, northern Pakistan , 2001, Journal of the Geological Society.

[29]  C. Kerans,et al.  Digital Outcrop Models: Applications of Terrestrial Scanning Lidar Technology in Stratigraphic Modeling , 2005 .

[30]  B. Jones,et al.  Fluvial Architecture of the Hawkesbury Sandstone (Triassic), Near Sydney, Australia , 2003 .

[31]  R. Gawthorpe,et al.  Geometry and architecture of faults in a syn-rift normal fault array: the Nukhul half-graben, Suez rift, Egypt , 2009 .

[32]  R. Jones,et al.  Characterisation of Fluvial Architectural Elements Using a Three Dimensional Outcrop Dataset – Escanilla Braided System , 2007 .

[33]  P. Friend.  Towards the Field Classification of Alluvial Architecture or Sequence , 2009 .

[34]  I. Montañez,et al.  Stratigraphy and architecture of the Upper Triassic Ischigualasto Formation, Ischigualasto Provincial Park, San Juan, Argentina , 2009 .

[35]  David R. Pyles,et al.  Concepts Learned from a 3D Outcrop of a Sinuous Slope Channel Complex: Beacon Channel Complex, Brushy Canyon Formation, West Texas, U.S.A. , 2010 .

[36]  Jaco H. Baas,et al.  EZ-ROSE: a computer program for equal-area circular histograms and statistical analysis of two-dimensional vectorial data , 2000 .

[37]  S. Buckley,et al.  Terrestrial laser scanning in geology: data acquisition, processing and accuracy considerations , 2008, Journal of the Geological Society.

[38]  David Healy,et al.  Calibration and validation of reservoir models: the importance of high resolution, quantitative outcrop analogues , 2008 .

[39]  Howell,et al.  Aeolian architecture, bedform climbing and preservation space in the Cretaceous Etjo Formation, NW Namibia , 2000 .

[40]  David Hodgetts,et al.  Integration of digital outcrop models (DOMs) and high resolution sedimentology – workflow and implications for geological modelling: Oukaimeden Sandstone Formation, High Atlas (Morocco) , 2010 .

[41]  J. Vallet,et al.  OBLIQUE HELICOPTER-BASED LASER SCANNING FOR DIGITAL TERRAIN MODELLING AND VISUALISATION OF GEOLOGICAL OUTCROPS , 2008 .

[42]  B. Romans,et al.  Stratigraphic evolution of an outcropping continental slope system, Tres Pasos Formation at Cerro Divisadero, Chile , 2009 .

[43]  Aloysius Wehr,et al.  Airborne laser scanning—an introduction and overview , 1999 .

[44]  S. Buckley,et al.  Quantifying clinothem geometry in a forced‐regressive river‐dominated delta, Panther Tongue Member, Utah, USA , 2010 .

[45]  M. Gibling.  Width and Thickness of Fluvial Channel Bodies and Valley Fills in the Geological Record: A Literature Compilation and Classification , 2006 .