Modeling and Controller Design of a Semiisolated Multiinput Converter for a Hybrid PV/Wind Power Charger System

The objective of this paper is to propose the development of a multiinput dc-dc converter (MIC) family, which is composed of isolated and/or nonisolated dc-dc converters. By analyzing five basic isolated dc-dc converters, four isolated pulsating voltage source cells and three isolated pulsating current source cells are generated. Moreover, a semiisolated multiinput converter (S-MIC) for hybrid PV/wind power charger system which can simplify the power system, reduce the cost, deliver continuous power, and overcome high-voltage-transfer-ratio problems is proposed. In this paper, the operational principle of the proposed S-MIC is explained, the small-signal ac model is derived, and the controller design is developed. Computer simulations and experimental results are presented to verify the accuracy of the proposed small-signal ac model and the performance of the proposed S-MIC.

[1]  M. Ferdowsi,et al.  Nonlinear Power Sharing Controller for a Double-Input H-Bridge-Based Buckboost–Buckboost Converter , 2013, IEEE Transactions on Power Electronics.

[2]  Cheng Wang,et al.  A Novel Soft-Switching Multiport Bidirectional DC–DC Converter for Hybrid Energy Storage System , 2014, IEEE Transactions on Power Electronics.

[3]  Yaow-Ming Chen,et al.  Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications , 2002 .

[4]  A. Kwasinski,et al.  Identification of Feasible Topologies for Multiple-Input DC–DC Converters , 2009, IEEE Transactions on Power Electronics.

[5]  S. J. Mason.  Feedback Theory-Further Properties of Signal Flow Graphs , 1956, Proceedings of the IRE.

[6]  Issa Batarseh,et al.  An Integrated Four-Port DC/DC Converter for Renewable Energy Applications , 2010, IEEE Transactions on Power Electronics.

[7]  Alexis Kwasinski,et al.  Analysis of Soft-Switching Isolated Time-Sharing Multiple-Input Converters for DC Distribution Systems , 2013, IEEE Transactions on Power Electronics.

[8]  Xiaodong Li,et al.  Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC Converter , 2010, IEEE Transactions on Power Electronics.

[9]  A. Emadi,et al.  A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[10]  Mummadi Veerachary,et al.  Two-Loop Controlled Buck–SEPIC Converter for Input Source Power Management , 2012, IEEE Transactions on Industrial Electronics.

[11]  Xinbo Ruan,et al.  Asymmetrical Half-Bridge Double-Input DC/DC Converters Adopting Pulsating Voltage Source Cells for Low Power Applications , 2014, IEEE Transactions on Power Electronics.

[12]  Yaow-Ming Chen,et al.  Modeling and Controller Design of an Autonomous PV Module for DMPPT PV Systems , 2014, IEEE Transactions on Power Electronics.

[13]  Weidong Xiao,et al.  Regulation of Photovoltaic Voltage , 2007, IEEE Transactions on Industrial Electronics.

[14]  Jian Cao,et al.  A Multiple-Input DC–DC Converter Topology , 2009, IEEE Transactions on Power Electronics.

[15]  Alexis Kwasinski,et al.  Multiple-input single ended primary inductor converter (SEPIC) converter for distributed generation applications , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[16]  Aleksandar Prodic,et al.  Predictive digital current programmed control , 2003 .

[17]  J.W. Kolar,et al.  An Isolated Three-Port Bidirectional DC-DC Converter With Decoupled Power Flow Management , 2008, IEEE Transactions on Power Electronics.

[18]  M. Sabahi,et al.  Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System , 2012, IEEE Transactions on Power Electronics.

[19]  Seyed Hossein Hosseini,et al.  New Extendable Single-Stage Multi-input DC–DC/AC Boost Converter , 2014, IEEE Transactions on Power Electronics.

[20]  J.L. Duarte,et al.  Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching , 2008, IEEE Transactions on Power Electronics.

[21]  P.L. Chapman,et al.  Object oriented modeling of a multiple-input multiple-output flyback converter in Dymola , 2004, 2004 IEEE Workshop on Computers in Power Electronics, 2004. Proceedings..

[22]  I. Batarseh,et al.  Modeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications , 2010, IEEE Transactions on Power Electronics.

[23]  Jorge L. Duarte,et al.  Family of multiport bidirectional DC¿DC converters , 2006 .

[24]  S.M. Muyeen,et al.  A Variable Speed Wind Turbine Control Strategy to Meet Wind Farm Grid Code Requirements , 2010, IEEE Transactions on Power Systems.

[25]  Yaow-Ming Chen,et al.  A Systematic Approach to Synthesizing Multi-Input DC/DC Converters , 2007, 2007 IEEE Power Electronics Specialists Conference.

[26]  Yaow-Ming Chen,et al.  Multiinput converter with power factor correction, maximum power point tracking, and ripple-free input currents , 2004, IEEE Transactions on Power Electronics.

[27]  M. Vitelli,et al.  Optimization of perturb and observe maximum power point tracking method , 2005, IEEE Transactions on Power Electronics.

[28]  Stéphane Bibian,et al.  Time delay compensation of digital control for DC switchmode power supplies using prediction techniques , 2000 .

[29]  Yaow-Ming Chen,et al.  Double-input PWM DC/DC converter for high/low voltage sources , 2003, The 25th International Telecommunications Energy Conference, 2003. INTELEC '03..

[30]  Fujio Kurokawa,et al.  Characteristics of the multiple-input DC-DC converter , 2004, IEEE Transactions on Industrial Electronics.

[31]  Quan Li,et al.  A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations , 2008, IEEE Transactions on Power Electronics.