A practical guide to the staggered herringbone mixer.

An analytical model of mixing in the staggered herringbone mixer (SHM) was derived to estimate mixing parameters and provide practical expressions to guide mixer design and operation for a wide range of possible solutes and flow conditions. Mixing in microfluidic systems has historically been characterized by the mixing of a specific solute system or by the redistribution of flow streams; this approach does not give any insight into the ideal operational parameters of the mixer with an arbitrary real system. For Stokes-flow mixers, mixing can be computed from a relationship between solute diffusivity, flow rate, and mixer length. Confocal microscopy and computational fluid dynamics (CFD) modeling were used to directly determine the extent of mixing for several solutes in the staggered herringbone mixer over a range of Reynolds numbers (Re) and Péclet numbers (Pe); the results were used to develop and evaluate an analytical model of its behavior. Mixing was found to be a function of only Pe and downstream position in the mixer. Required mixer length was proportional to log(Pe); this analytical model matched well with the confocal data and CFD model for Pe<5 x 10(4), at which point the experiments reached the limit of resolution. For particular solutes, required length and mixing time depend upon Re and diffusivity. This analytical model is applicable to other solute systems, and possibly to other embodiments of the mixer, to enable optimal design, operation, and estimation of performance.

[1]  Julio M. Ottino,et al.  Feasibility of numerical tracking of material lines and surfaces in chaotic flows , 1987 .

[2]  B. Ware,et al.  Self-diffusion and probe diffusion in dilute and semidilute aqueous solutions of dextran , 1991 .

[3]  Julio M. Ottino,et al.  Stretching in duct flows , 1991 .

[4]  Domenico D'Alessandro,et al.  Control of mixing in fluid flow: a maximum entropy approach , 1999, IEEE Trans. Autom. Control..

[5]  H. Goto,et al.  Active micromixer for microfluidic systems using lead‐zirconate‐titanate(PZT)‐generated ultrasonic vibration , 2000, Electrophoresis.

[6]  A Manz,et al.  Microfabricated devices for fluid mixing and their application for chemical synthesis. , 2001, Chemical record.

[7]  I. Mezić,et al.  Chaotic Mixer for Microchannels , 2002, Science.

[8]  Yi-Kuen Lee,et al.  Efficient spatial-temporal chaotic mixing in microchannels , 2003 .

[9]  Hengzi Wang,et al.  Numerical investigation of mixing in microchannels with patterned grooves , 2003 .

[10]  Dong Sung Kim,et al.  A barrier embedded chaotic micromixer , 2004 .

[11]  Hassan Aref,et al.  Designing for chaos: applications of chaotic advection at the microscale , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[12]  Abraham D Stroock,et al.  Investigation of the staggered herringbone mixer with a simple analytical model , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[13]  T. G. Kang,et al.  Colored particle tracking method for mixing analysis of chaotic micromixers , 2004 .

[14]  Eun Kyu Lee,et al.  Analysis of Passive Mixing Behavior in a Poly(Dimethylsiloxane) Microfluidic Channel Using Confocal Fluorescence and Raman Microscopy , 2004, Applied spectroscopy.

[15]  Peter B Howell,et al.  Design and evaluation of a Dean vortex-based micromixer. , 2004, Lab on a chip.

[16]  Stephen Wiggins,et al.  Foundations of chaotic mixing , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[17]  V Hessel,et al.  An optimised split-and-recombine micro-mixer with uniform chaotic mixing. , 2004, Lab on a chip.

[18]  Stephen Wiggins,et al.  Introduction: mixing in microfluidics , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[19]  Paul Yager,et al.  Simple quantitative optical method for monitoring the extent of mixing applied to a novel microfluidic mixer , 2004 .

[20]  Jing-Tang Yang,et al.  Geometric effects on fluid mixing in passive grooved micromixers. , 2005, Lab on a chip.

[21]  S. Quake,et al.  Microfluidics: Fluid physics at the nanoliter scale , 2005 .

[22]  Mansun Chan,et al.  A DNA-detection platform with integrated photodiodes on a silicon chip , 2005 .

[23]  M. Kaufman,et al.  Entropic characterization of mixing in microchannels , 2005 .

[24]  E. Bodenschatz,et al.  Using microfluidic channel networks to generate gradients for studying cell migration. , 2005, Methods in molecular biology.

[25]  Peter B Howell,et al.  A microfluidic mixer with grooves placed on the top and bottom of the channel. , 2005, Lab on a chip.

[26]  Kenji Tajima,et al.  PDMS microchannels with slanted grooves embedded in three walls to realize efficient spiral flow , 2005 .

[27]  J. Aubin,et al.  Design of micromixers using CFD modelling , 2005 .

[28]  Tianning Chen,et al.  Simulation and optimization of chaotic micromixer using lattice Boltzmann method , 2005 .

[29]  Peter B Howell,et al.  Toolbox for the design of optimized microfluidic components. , 2006, Lab on a chip.

[30]  D. Hassell,et al.  Investigation of the convective motion through a staggered herringbone micromixer at low Reynolds number flow , 2006 .

[31]  Helmut Pennemann,et al.  Theoretical and experimental characterization of a low-Reynolds number split-and-recombine mixer , 2006 .

[32]  Helen Song,et al.  Reactions in droplets in microfluidic channels. , 2006, Angewandte Chemie.

[33]  Modeling for fluid mixing in passive micromixers using the vortex index , 2006 .

[34]  J. Voldman,et al.  Optimizing micromixer design for enhancing dielectrophoretic microconcentrator performance. , 2007, Analytical chemistry.

[35]  Joel P Golden,et al.  Target delivery in a microfluidic immunosensor. , 2007, Biosensors & bioelectronics.

[36]  Paul Yager,et al.  Concentration gradient immunoassay. 1. An immunoassay based on interdiffusion and surface binding in a microchannel. , 2007, Analytical chemistry.

[37]  Ray W.K. Allen,et al.  Numerical characterisation of folding flow microchannel mixers , 2007 .