Optimal configuration of blast furnace slag runner to reduce fluid flow stresses at wall using mathematical modelling

Abstract A three-dimensional mathematical model was developed to predict the wall shear stresses due to flow of liquid slag in slag runner of 'G' blast furnace of Tata Steel under different conditions. The liquid slag flow in the slag runner was considered to be turbulent and incompressible. The model was developed for single phase, steady state and isothermal conditions. To this end, the Navier Stokes equations along with continuity and turbulence equations (standard k–ϵ model) were simultaneously solved with appropriate boundary conditions at the associated physical boundaries of the calculation domain. Several configurations were numerically assessed with respect to reduced shear stresses on the wall of the slag runner to select the best one. Due to accelerating flow the operating heights of liquid slag (density 2800 kg m–3 at 1500°C) within the slag runner for different configurations were estimated with the help of Bernoulli's and continuity equations and fixed before the computation. The different configurations comprised of three segments with different parameters of either elevation or radius of curvature. Relatively high shear stresses were numerically predicted at the joint area of second and third segments of the slag runner for all the configurations. The radius of curvature was found as the dominant factor to reduce the shear stress at the joint region.