A novel technique of microforce sensing and loading

With remarkable reduction of the characteristic scales in researches of materials and structures, microforce sensing and loading is becoming an important and challenging issue in mechanical tests. On the one hand, miniaturization of the tested objects leads to serious problems of manipulating, grasping, and loading. On the other hand, the smaller a sample is, the smaller the forces have to be measured. Up to now, it is still a difficult task to measure such small forces. In this paper, a newly developed probe-type microforce sensor is described, which can be combined with a micromanipulator to perform microforce sensing and loading. A strategy call ladder or hierarchy force sensing and loading method is further suggested, by which the above combined system is used as a platform to calibrate other cantilever probes with finer resolutions, which may form a sequence of probe-type sequence microforce sensors to cover a broad range of forces to be measured from mN down to nN and even lower provided that proper spring constants are selected for these force sensors. In the preliminary studies, two probe-type microforce sensors are successfully developed with force sensing sensitivities of 705.4 nN/mV and 37.3 nN/mV, respectively. They are applied to calibrate atomic force microscope (AFM) cantilevers with various spring constants, and then one of these calibrated cantilevers is used as a more sensitive force sensor to calibrate other even softer cantilevers. Tests of real microscale objects, a single silk filament and a papilla on the lotus leaf surface, demonstrate excellent performance of the developed sensors.

[1]  R. Ruoff,et al.  Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load , 2000, Science.

[2]  Charles M. Lieber,et al.  Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes , 1997 .

[3]  Håkan Olin,et al.  Preparation and characterization of electrochemically etched W tips for STM , 1999 .

[4]  W. Federle,et al.  Small insect measurements using a custom MEMS force sensor , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[5]  G. E. Troxell,et al.  The testing of engineering materials , 1982 .

[6]  James D. Holbery,et al.  Experimental determination of scanning probe microscope cantilever spring constants utilizing a nanoindentation apparatus , 2000 .

[7]  Lutz Doering,et al.  Piezoresistive cantilever as portable micro force calibration standard , 2003 .

[8]  Tatsuo Arai,et al.  Force control system for autonomous micro-manipulation , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[9]  J. Sader,et al.  Method for the calibration of atomic force microscope cantilevers , 1995 .

[10]  K. Suzuki,et al.  Measurements of mechanical properties of microfabricated thin films , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[11]  R. L. Edwards,et al.  A new technique for measuring the mechanical properties of thin films , 1997 .

[12]  F. Mendels,et al.  Dynamic properties of AFM cantilevers and the calibration of their spring constants , 2006 .

[13]  Timothy Senden,et al.  Experimental Determination of Spring Constants in Atomic Force Microscopy , 1994 .

[14]  Hans-Jürgen Butt,et al.  On the adhesion between fine particles and nanocontacts: an atomic force microscope study. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[15]  Rodney S. Ruoff,et al.  In situ mechanical testing of templated carbon nanotubes , 2006 .

[16]  S. Okuma,et al.  A method for determining the spring constant of cantilevers for atomic force microscopy , 1996 .

[17]  P. Hansma,et al.  A nondestructive method for determining the spring constant of cantilevers for scanning force microscopy , 1993 .

[18]  V. Nesterov,et al.  Facility and methods for the measurement of micro and nano forces in the range below 10?5 N with a resolution of 10?12 N (development concept) , 2007 .

[19]  M. A. Haque,et al.  In-situ tensile testing of nano-scale specimens in SEM and TEM , 2002 .

[20]  Zhong Lin Wang,et al.  Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays , 2006, Science.

[21]  J. Bechhoefer,et al.  Calibration of atomic‐force microscope tips , 1993 .

[22]  B. Ilic,et al.  Dynamic characterization of nano oscillators by atomic force microscopy , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[23]  John Hedley,et al.  Quantitative analytical atomic force microscopy: a cantilever reference device for easy and accurate AFM spring-constant calibration , 2004 .

[24]  Rodney S. Ruoff,et al.  Modulus, Fracture Strength, and Brittle vs. Plastic Response of the Outer Shell of Arc-grown Multi-walled Carbon Nanotubes , 2007 .

[25]  Christophe Clanet,et al.  Onset of menisci , 2002, Journal of Fluid Mechanics.

[26]  A. Bachtold,et al.  Mechanical detection of carbon nanotube resonator vibrations. , 2007, Physical review letters.

[27]  Chwee Teck Lim,et al.  Tensile test of a single nanofiber using an atomic force microscope tip , 2005 .

[28]  Xide Li,et al.  In situ and real-time tensile testing of thin films using double-field-of-view electronic speckle pattern interferometry , 2004 .

[29]  Yoshitaka Mitsuda,et al.  Nanoscale Mechanics of Carbon Nanotube Evaluated by Nanoprobe Manipulation in Transmission Electron Microscope , 2006 .

[30]  D. P. Potasek,et al.  Characterizing fruit fly flight behavior using a microforce sensor with a new comb-drive configuration , 2005, Journal of Microelectromechanical Systems.

[31]  Lawrence A Bottomley,et al.  A method for calculating the spring constant of atomic force microscopy cantilevers with a nonrectangular cross section. , 2005, Analytical chemistry.

[32]  C. Wykes,et al.  Holographic and speckle interferometry: Speckle pattern interferometry , 1989 .

[33]  Peter C. Y. Chen,et al.  An integrated probe sensor for micro-force measurement , 2006 .