Parametric design thinking: A case-study of practice-embedded architectural research
暂无分享,去创建一个
[1] G. Rozvany. Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics , 2001 .
[2] Edwin Earl Catmull,et al. A subdivision algorithm for computer display of curved surfaces. , 1974 .
[3] David A. Huffman,et al. Curvature and Creases: A Primer on Paper , 1976, IEEE Transactions on Computers.
[4] A. Brew. The nature of research , 2001 .
[5] Frédo Durand,et al. Design of structurally-sound masonry buildings using 3d static analysis , 2012 .
[6] H. Schek. The force density method for form finding and computation of general networks , 1974 .
[7] Olga Sorkine-Hornung,et al. Assembling self-supporting structures , 2014, ACM Trans. Graph..
[8] Wolfe,et al. Graphical Analysis; A Text Book on Graphic Statics , 2010 .
[9] Lauren L. Beghini,et al. Structural optimization using graphic statics , 2014 .
[10] Kenneth A. Brakke. Minimal surfaces, corners, and wires , 1992 .
[11] J. Maxwell,et al. I.—On Reciprocal Figures, Frames, and Diagrams of Forces , 1870, Transactions of the Royal Society of Edinburgh.
[12] Wes McGee,et al. Processes for an Architecture of Volume , 2013 .
[13] Marjan Mernik,et al. Exploration and exploitation in evolutionary algorithms: A survey , 2013, CSUR.
[14] Cristián Calvo Barentin,et al. The Armadillo Vault Computational Design and Digital Fabrication of a Freeform Stone Shell , 2016 .
[15] Joel Sakarovitch,et al. Stereotomy, a multifaceted technique , 2003 .
[16] Shajay Bhooshan. Interactive design of curved-crease-folding , 2016 .
[17] Vishu Bhooshan,et al. Curve-folded form-work for cast, compressive skeletons , 2015, SpringSim.
[18] Andrew Saint,et al. Architect and engineer : a study in sibling rivalry , 2007 .
[19] Pierre Alliez,et al. On the equilibrium of simplicial masonry structures , 2013, ACM Trans. Graph..
[20] Robert Aish,et al. Embedded Rationality: A Unified Simulation Framework for Interactive Form Finding , 2010 .
[21] Takeo Igarashi,et al. Parametric self-supporting surfaces via direct computation of airy stress functions , 2015, ACM Trans. Graph..
[22] Johannes Wallner,et al. Design of self-supporting surfaces , 2012, ACM Trans. Graph..
[23] Johannes Wallner,et al. Interactive Modeling of Architectural Freeform Structures: Combining Geometry with Fabrication and Statics , 2014, AAG.
[24] Paul Richens,et al. Subdivision surface modelling for architecture , 2010 .
[25] Martin Kilian,et al. Curved folding , 2008, SIGGRAPH 2008.
[26] Philippe Block,et al. Rethinking structural masonry: unreinforced, stone-cut shells , 2013 .
[27] Johannes Wallner,et al. Approximation algorithms for developable surfaces , 1999, Comput. Aided Geom. Des..
[28] Philippe Block,et al. Particle-spring systems: Design of a cantilevering concrete canopy , 2014 .
[29] Rob Saunders,et al. Robotic Fabrication in Architecture, Art and Design 2016 , 2016 .
[30] M. Barnes,et al. Form Finding and Analysis of Tension Structures by Dynamic Relaxation , 1999 .
[31] P. E. Bezier,et al. Example of an existing system in the motor industry: the Unisurf system , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.
[32] D. S. Wakefield. Engineering analysis of tension structures: theory and practice , 1999 .
[33] Johannes Wallner,et al. The focal geometry of circular and conical meshes , 2008, Adv. Comput. Math..
[34] Charles J. Merdinger. A history of civil engineering , 1949 .
[35] Nigel Cross,et al. Creativity in the design process: co-evolution of problem–solution , 2001 .
[36] Shajay Bhooshan,et al. Use of sub-division surfaces in architectural form-finding and procedural modelling , 2011, SpringSim.
[37] Jun Wang,et al. Cell packing structures , 2015, Comput. Aided Des..
[38] Matthias Rippmann,et al. Funicular Shell Design: Geometric approaches to form finding and fabrication of discrete funicular structures , 2016 .
[39] Snežana Lawrence,et al. Developable Surfaces: Their History and Application , 2011 .
[40] Antoine Picon. Navier and the introduction of suspension bridges in France , 1988 .
[41] Paul Shepherd,et al. Intuitive interactive form finding of optimised fabric-cast concrete , 2012 .
[42] Takeo Igarashi,et al. Interactive Design of Planar Curved Folding by Reflection , 2011, PG.
[43] Otto Röschel,et al. Developable (1, n) - Bézier surfaces , 1992, Comput. Aided Geom. Des..
[44] Oliver Tessmann. Collaborative Design Procedures for Architects and Engineers , 2008 .
[45] Olga Sorkine-Hornung,et al. Designing unreinforced masonry models , 2013, ACM Trans. Graph..
[46] Philippe Block,et al. On the equilibrium of funicular polyhedral frames and convex polyhedral force diagrams , 2015, Comput. Aided Des..
[47] Helmut Pottmann,et al. Discrete Surfaces for Architectural Design , 2007 .
[48] Martijn Veltkamp. Structural optimization of free form framed structures in early stages of design , 2010 .
[49] Daniel Dennett,et al. Darwin's “strange inversion of reasoning” , 2009, Proceedings of the National Academy of Sciences.
[50] Robin Evans,et al. The Projective Cast: Architecture and Its Three Geometries , 1995 .
[51] Axel Kilian,et al. Design exploration through bidirectional modeling of constraints , 2006 .
[52] Philippe Block,et al. Interactive Vault Design , 2012 .
[53] M. A. Sabin. An existing system in the aircraft industry. The British Aircraft Corporation Numerical Master Geometry system , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.
[54] Imre Lakatos,et al. The Methodology of Scientific Research Programmes , 1978 .
[55] Peng Song,et al. Recursive interlocking puzzles , 2012, ACM Trans. Graph..
[56] Christoph Gengnagel,et al. Modelling Behaviour: Design Modelling Symposium 2015 , 2016 .
[57] Baining Guo,et al. Computing self-supporting surfaces by regular triangulation , 2013, ACM Trans. Graph..
[58] N. Cross. Designerly ways of knowing , 2006 .
[59] Bruce Archer,et al. Design as a discipline , 1979 .
[60] Santiago Sánchez-Cervera Huerta,et al. Structural Design in the Work of Gaudí , 2006 .
[61] Charles M. Eastman,et al. The Use of Computers Instead of Drawings in Building Design. , 1975 .
[62] Mark Pauly,et al. Shape‐Up: Shaping Discrete Geometry with Projections , 2012, Comput. Graph. Forum.
[63] Ivan E. Sutherland,et al. Sketch pad a man-machine graphical communication system , 1964, DAC.
[64] M. Bendsøe,et al. Topology Optimization: "Theory, Methods, And Applications" , 2011 .
[65] Philippe Block,et al. Shell Structures for Architecture - Form Finding and Optimization , 2014, Shell Structures for Architecture.
[66] P. Godfrey‐Smith. Darwinian populations and natural selection , 2009 .
[67] E. Ramm,et al. Structural optimization and form finding of light weight structures , 2001 .
[68] Philippe Block,et al. THRUST NETWORK ANALYSIS : A NEW METHODOLOGY FOR THREE-DIMENSIONAL EQUILIBRIUM , 2007 .
[69] H. Rittel,et al. Dilemmas in a general theory of planning , 1973 .
[70] Jeremy Till. Three myths and one model , 2007 .
[71] F. Pérez,et al. Quasi-developable B-spline surfaces in ship hull design , 2007, Comput. Aided Des..
[72] Herbert A. Simon,et al. The Sciences of the Artificial , 1970 .
[73] Fabio Gramazio,et al. Advances in Architectural Geometry 2016 , 2016 .
[74] B. Hillier,et al. The Social Logic of Space , 1984 .
[75] Philippe Block,et al. Interactive Equilibrium Modelling , 2014 .
[76] Mark Pauly,et al. Fabrication‐aware Design with Intersecting Planar Pieces , 2013, Comput. Graph. Forum.
[77] Christopher Williams,et al. British Museum Great Court , 2010 .
[78] Wenping Wang,et al. On Vertex Offsets of Polyhedral Surfaces , 2016 .