Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration.

The quest for synthetic materials to repair load-bearing bone lost because of trauma, cancer, or congenital bone defects requires the development of porous, high-performance scaffolds with exceptional mechanical strength. However, the low mechanical strength of porous bioactive ceramic and glass scaffolds, compared with that of human cortical bone, has limited their use for these applications. In the present work bioactive 6P53B glass scaffolds with superior mechanical strength were fabricated using a direct ink writing technique. The rheological properties of Pluronic® F-127 (referred to hereafter simply as F-127) hydrogel-based inks were optimized for the printing of features as fine as 30 μm and of three-dimensional scaffolds. The mechanical strength and in vitro degradation of the scaffolds were assessed in a simulated body fluid (SBF). The sintered glass scaffolds showed a compressive strength (136 ± 22 MPa) comparable with that of human cortical bone (100-150 MPa), while the porosity (60%) was in the range of that of trabecular bone (50-90%). The strength is ~100-times that of polymer scaffolds and 4-5-times that of ceramic and glass scaffolds with comparable porosities. Despite the strength decrease resulting from weight loss during immersion in SBF, the value (77 MPa) is still far above that of trabecular bone after 3 weeks. The ability to create both porous and strong structures opens a new avenue for fabricating scaffolds for load-bearing bone defect repair and regeneration.

[1]  David J Mooney,et al.  Coating of VEGF-releasing scaffolds with bioactive glass for angiogenesis and bone regeneration. , 2006, Biomaterials.

[2]  Andrew G Alleyne,et al.  Micro-robotic deposition guidelines by a design of experiments approach to maximize fabrication reliability for the bone scaffold application. , 2008, Acta biomaterialia.

[3]  L L Hench,et al.  Surface-active biomaterials. , 1984, Science.

[4]  Julian R Jones,et al.  Optimising bioactive glass scaffolds for bone tissue engineering. , 2006, Biomaterials.

[5]  Eduardo Saiz,et al.  Bioinspired Strong and Highly Porous Glass Scaffolds , 2011, Advanced functional materials.

[6]  Eduardo Saiz,et al.  Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives. , 2011, Materials science & engineering. C, Materials for biological applications.

[7]  R. Ritchie,et al.  Tough, Bio-Inspired Hybrid Materials , 2008, Science.

[8]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[9]  Eduardo Saiz,et al.  Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications. , 2005, Acta biomaterialia.

[10]  J. K. Leach,et al.  Proangiogenic Potential of a Collagen/Bioactive Glass Substrate , 2008, Pharmaceutical Research.

[11]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[12]  John A. Rogers,et al.  Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes , 2009, Science.

[13]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[14]  Winslow H. Herschel,et al.  Konsistenzmessungen von Gummi-Benzollösungen , 1926 .

[15]  L. McIntosh,et al.  Impact of bone geometry on effective properties of bone scaffolds. , 2009, Acta biomaterialia.

[16]  E. Saiz,et al.  Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel. , 2010, Acta biomaterialia.

[17]  Larry L Hench,et al.  Third-Generation Biomedical Materials , 2002, Science.

[18]  R. Buscall,et al.  The rheology of concentrated dispersions of weakly attracting colloidal particles with and without wall slip , 1993 .

[19]  Eduardo Saiz,et al.  Freezing as a Path to Build Complex Composites , 2006, Science.

[20]  Delbert E Day,et al.  Bioactive glass in tissue engineering. , 2011, Acta biomaterialia.

[21]  J. Hollinger,et al.  Evaluation of particulate Bioglass in a rabbit radius ostectomy model. , 1997, Journal of biomedical materials research.

[22]  J. Russias,et al.  Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. , 2007, Journal of biomedical materials research. Part A.

[23]  Q. Li,et al.  Nanoparticle Inks for Directed Assembly of Three‐Dimensional Periodic Structures , 2003 .

[24]  L. Bergström.  SHEAR THINNING AND SHEAR THICKENING OF CONCENTRATED CERAMIC SUSPENSIONS , 1998 .

[25]  R. B. Ashman,et al.  Relations of mechanical properties to density and CT numbers in human bone. , 1995, Medical engineering & physics.

[26]  E. Saiz,et al.  Interfaces in graded coatings on titanium-based implants. , 2009, Journal of biomedical materials research. Part A.

[27]  Thomas J. Dougherty,et al.  A Mechanism for Non‐Newtonian Flow in Suspensions of Rigid Spheres , 1959 .

[28]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[29]  Richard Weinkamer,et al.  Nature’s hierarchical materials , 2007 .

[30]  J. Cesarano,et al.  Direct Ink Writing of Three‐Dimensional Ceramic Structures , 2006 .

[31]  Dilhan M. Kalyon,et al.  Rheological behavior of a concentrated suspension: A solid rocket fuel simulant , 1993 .

[32]  J. Lewis,et al.  Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds. , 2005, Biomaterials.

[33]  Scott J. Hollister,et al.  Erratum: Porous scaffold design for tissue engineering , 2006 .

[34]  B. Bal,et al.  Preparation and in vitro evaluation of bioactive glass (13-93) scaffolds with oriented microstructures for repair and regeneration of load-bearing bones. , 2010, Journal of biomedical materials research. Part A.

[35]  J. Cesarano,et al.  Directed colloidal assembly of 3D periodic structures , 2002 .

[36]  Michael F. Ashby,et al.  The mechanical properties of natural materials. I. Material property charts , 1995, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[37]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[38]  Aldo R Boccaccini,et al.  45S5 Bioglass-derived glass-ceramic scaffolds for bone tissue engineering. , 2006, Biomaterials.

[39]  Q. Fu,et al.  Silicate, borosilicate, and borate bioactive glass scaffolds with controllable degradation rate for bone tissue engineering applications. I. Preparation and in vitro degradation. , 2010, Journal of biomedical materials research. Part A.

[40]  Eduardo Saiz,et al.  Silicate glass coatings on Ti-based implants , 1998 .

[41]  D. Cohn,et al.  Smart hydrogels for in situ generated implants. , 2005, Biomacromolecules.

[42]  L L Hench,et al.  Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass 45S5 dissolution. , 2001, Journal of biomedical materials research.

[43]  Delbert E Day,et al.  Mechanical and in vitro performance of 13-93 bioactive glass scaffolds prepared by a polymer foam replication technique. , 2008, Acta biomaterialia.