Adhesive properties of laminated veneer lumber poles for use in temporary soil nailing: development and evaluation of a test method for curved structures in a high-alkaline environment

[1]  R. Marte,et al.  Laminated Veneer Lumber Poles for temporary Soil Nailing-Investigation of Material Properties , 2016 .

[2]  M. Grabner,et al.  Methods of Forming Veneer Structures , 2016 .

[3]  Benoit P. Gilbert,et al.  Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees , 2014 .

[4]  Peter Niemz,et al.  Improvement of tensile shear strength and wood failure percentage of 1C PUR bonded wooden joints at wet stage by means of DMF priming , 2014, European Journal of Wood and Wood Products.

[5]  Michael K. Schmidt.  Die Verklebung von Buchenholz für tragende Holzbauteile unter besonderer Berücksichtigung der Farbverkernung , 2014 .

[6]  M. Altunok.  Eigenschaften von Schichtholz (LVL) aus wärmebehandelten Furnieren verschiedener Holzarten , 2013 .

[7]  G. Schickhofer,et al.  The mechanical potential of the Tree-of-Heaven (Ailanthus altissima) , 2013 .

[8]  Peter Niemz,et al.  Determining moisture-dependent elastic characteristics of beech wood by means of ultrasonic waves , 2012, Wood Science and Technology.

[9]  Wolfgang Rug,et al.  Untersuchungen zur Festigkeit und Tragfähigkeit von Holz unter dem Einfluss chemisch-aggressiver Medien , 2011 .

[10]  Stefan Hering,et al.  Charakterisierung und Modellierung der Materialeigenschaften von Rotbuchenholz zur Simulation von Holzverklebungen , 2011 .

[11]  Peter Niemz,et al.  Verarbeitung und Verwendungsmöglichkeiten von Laubholz und Laubholzresten , 2010 .

[12]  O. Sulaiman,et al.  Effects of cold setting adhesives on properties of laminated veneer lumber from oil palm trunks in comparison with rubberwood , 2011, European Journal of Wood and Wood Products.

[13]  S. R. Shukla,et al.  Properties of laboratory made yellow poplar (Liriodendron tulipifera) laminated veneer lumber: effect of the adhesives , 2009, European Journal of Wood and Wood Products.

[14]  Charles R. Frihart,et al.  Adhesive Groups and How They Relate to the Durability of Bonded Wood , 2009 .

[15]  D. Bhattacharyya,et al.  Profile production in multi-veneer sheets by continuous roll forming , 2008 .

[16]  Ulrich Müller,et al.  Elastic properties of adhesive polymers. I. Polymer films by means of electronic speckle pattern interferometry , 2007 .

[17]  Max Kufner,et al.  Elastizitätsmodul und Zugfestigkeit von Holz verschiedener Rohdichte in Abhängigkeit vom Feuchtigkeitsgehalt , 1978, Holz als Roh- und Werkstoff.

[18]  C. Frihart.  Adhesive Bonding and Performance Testing of Bonded Wood Products , 2005 .

[19]  Bernhard Schröder,et al.  Klebtechnik: Klebstoffe, Anwendungen und Verfahren , 2005 .

[20]  Hidefumi Yamauchi,et al.  Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber , 2001, Journal of Wood Science.

[21]  S. Kawai,et al.  Recent research and development work on wood composites in Japan , 1994, Wood Science and Technology.

[22]  U. Tamburini.  Alkaline degradation of wood: Effects on Young's modulus , 1970, Wood Science and Technology.

[23]  Shuichi Kawai,et al.  Manufacture and mechanical properties of cylindrical laminated veneer lumber. , 1994 .

[24]  M. Paulitsch.  Methoden der Spanplattenuntersuchung : Grundlagen, Ausführungen, Anwendungen , 1986 .

[25]  K. Stundl.  Auswirkungen phenolhaltiger Abwässer auf Vorflut-und Grundwasser , 1955 .

[26]  Dr.-Ing. Franz Kollmann.  Oberflächenbehandlung von Holz , 1955 .

[27]  F. Kollmann.  Anatomie und Pathologie, Chemie, Physik Elastizität und Festigkeit , 1951 .

[28]  F. Kollmann.  Fehler des Holzes , 1951 .