Evolution and formation of dissimilar metal interfaces in fusion welding

[1]  A. Takeuchi,et al.  Direct Observation of Solidification Behaviors of Fe-Mn-Si Alloys During TIG Spot Welding Using Synchrotron X-Ray , 2022, SSRN Electronic Journal.

[2]  P. Shanthraj,et al.  Magneto-hydrodynamics of multi-phase flows in heterogeneous systems with large property gradients , 2021, Scientific Reports.

[3]  K. V. Falch,et al.  Mapping flow evolution in gas tungsten arc weld pools , 2021 .

[4]  Sanjeev Kumar,et al.  Microstructure and mechanical behavior of P91 steel dissimilar welded joints made with IN718 filler , 2021 .

[5]  J. Nie,et al.  Unusual solute segregation phenomenon in coherent twin boundaries , 2021, Nature Communications.

[6]  A. Rollett,et al.  Critical instability at moving keyhole tip generates porosity in laser melting , 2020, Science.

[7]  Michael C. Smith,et al.  A thermal fluid dynamics framework applied to multi-component substrates experiencing fusion and vaporisation state transitions , 2020 .

[8]  Fan Wu,et al.  Time evolved force domination in arc weld pools , 2020 .

[9]  N. Parab,et al.  Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-Speed Synchrotron X-ray Imaging , 2019, Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2.

[10]  F. Hejripour,et al.  Mass transport and solidification phenomenon in dissimilar metals arc welding , 2019 .

[11]  Michael F Toney,et al.  Dynamics of pore formation during laser powder bed fusion additive manufacturing , 2019, Nature Communications.

[12]  Kamel Fezzaa,et al.  Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging , 2019, Science.

[13]  Shian Gao,et al.  Revealing internal flow behaviour in arc welding and additive manufacturing of metals , 2018, Nature Communications.

[14]  S. Na,et al.  Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Al-alloy , 2018, International Journal of Heat and Mass Transfer.

[15]  P. Withers,et al.  In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing , 2018, Nature Communications.

[16]  Zhengtao Gan,et al.  Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron , 2017 .

[17]  R. M. Ward,et al.  Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: Experimental and modelling , 2017 .

[18]  A. Rack,et al.  Initiation and growth kinetics of solidification cracking during welding of steel , 2017, Scientific Reports.

[19]  S. Kou,et al.  Macrosegregation in dissimilar-metal fusion welding , 2016 .

[20]  P. Kah,et al.  Factors influencing Al-Cu weld properties by intermetallic compound formation , 2015 .

[21]  D. Aidun,et al.  Study of mass transport in autogenous GTA welding of dissimilar metals , 2015 .

[22]  Michael Drakopoulos,et al.  I12: the Joint Engineering, Environment and Processing (JEEP) beamline at Diamond Light Source , 2015, Journal of synchrotron radiation.

[23]  Norman McPherson,et al.  Application of laser in seam welding of dissimilar steel to aluminium joints for thick structural components , 2015 .

[24]  A. Snigirev,et al.  Retrieval of three-dimensional spatial information from fast in situ two-dimensional synchrotron radiography of solidification microstructure evolution , 2014 .

[25]  R. Mathiesen,et al.  Time-resolved X-ray diffraction studies of solidification microstructure evolution in welding , 2014 .

[26]  Kun Liu,et al.  Interfacial Microstructural Characterization of Ti/Al Joints by Gas Tungsten Arc Welding , 2014 .

[27]  Steven J. Zinkle,et al.  Materials Challenges in Nuclear Energy , 2013 .

[28]  Tomonori Yamada,et al.  In-situ X-ray observation of molten pool depth during laser micro welding , 2012 .

[29]  Kevin W Eliceiri,et al.  NIH Image to ImageJ: 25 years of image analysis , 2012, Nature Methods.

[30]  Alberto Echeverria,et al.  Material flow and mechanical behaviour of dissimilar AA2024-T3 and AA7075-T6 aluminium alloys friction stir welds , 2011 .

[31]  Pengsheng Wei.  Thermal Science of Weld Bead Defects: A Review , 2011 .

[32]  Andrew J. Pinkerton,et al.  Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications , 2011 .

[33]  R. Juanes,et al.  Fluid mixing from viscous fingering. , 2010, Physical review letters.

[34]  T. DebRoy,et al.  An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations , 2008 .

[35]  S. Kou,et al.  Macrosegregation in Cu–30Ni welds made with dissimilar filler metals , 2008 .

[36]  Peng Liu,et al.  Microstructure characteristics in TIG welded joint of Mg/Al dissimilar materials , 2007 .

[37]  H. Tsai,et al.  Effects of surface active elements on weld pool fluid flow and weld penetration in gas metal arc welding , 2001 .

[38]  P. Wei,et al.  Unsteady marangoni flow in a molten pool when welding dissimilar metals , 2000 .

[39]  PengSheng Wei,et al.  Mass, Momentum, and Energy Transport in a Molten Pool When Welding Dissimilar Metals , 1999 .

[40]  T. DebRoy,et al.  Current Issues and Problems in Welding Science , 1992, Science.

[41]  H. Kull.  Theory of the Rayleigh-Taylor instability , 1991 .

[42]  Julian Szekely,et al.  Heat- and fluid-flow phenomena in weld pools , 1984, Journal of Fluid Mechanics.

[43]  D. F. Swinehart,et al.  The Beer-Lambert Law , 1962 .

[44]  M. Roy,et al.  A fundamental analysis of factors affecting chemical homogeneity in the laser powder bed fusion process , 2022, International Journal of Heat and Mass Transfer.

[45]  J. Menghani,et al.  Optimum heat source position offset in welding of dissimilar Al-Cu metals using a theoretical approach , 2018 .

[46]  S. Kou,et al.  Fusion-boundary macrosegregation in dissimilar-filler welds : Fundamental solidification and macrosegregation in welds made with filler metals different in composition from the workpiece are presented , 2007 .

[47]  Stan A David,et al.  Physical processes in fusion welding , 1995 .

[48]  George M. Homsy,et al.  Viscous fingering in porous media , 1987 .