Millimeter-Wave Phase-Locked Loops for Terahertz transceiver using sub-harmonic injection locking

We propose a 100 GHz sub-harmonic injection locked oscillator (ILO) based Phase-Locked Loop (PLL) in CMOS for use in low power Millimeter-Wave (mm-Wave) and sub-Terahertz (THz) phased-array systems. PLL parameters for an imaging system are derived. Mixed-mode simulation to enhance simulation speed has been done with custom Verilog-A models for the PFD/CP/divider and circuit schematic of the ILO. PLL with a 2nd sub-harmonic ILO at 101 GHz driving a 50 Ω load is shown. Simulated using 1.1 V supply, the PLL phase noise is -76.5 dBc/Hz @ 1 MHz offset, frequency tuning range of ILO is 7 GHz, output power is -9.1 dBm at the load, and power consumption is 14.4 mW. The circuits are implemented in standard digital 65 nm CMOS, enabling high level of on-chip integration.

[1]  Hui Wu,et al.  Injection-Locked Clocking: A New GHz Clock Distribution Scheme , 2006, IEEE Custom Integrated Circuits Conference 2006.

[2]  L. J. Paciorek Injection locking of oscillators , 1965 .

[3]  Chorng-Kuang Wang,et al.  A low power W-band PLL with 17-mW in 65-nm CMOS technology , 2011, IEEE Asian Solid-State Circuits Conference 2011.

[4]  Zhiming Chen,et al.  W-Band Silicon-Based Frequency Synthesizers Using Injection-Locked and Harmonic Triplers , 2012, IEEE Transactions on Microwave Theory and Techniques.

[5]  Kun-Hung Tsai,et al.  A 43.7mW 96GHz PLL in 65nm CMOS , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[6]  Win Chaivipas,et al.  A Low Phase Noise Quadrature Injection Locked Frequency Synthesizer for MM-Wave Applications , 2011, IEEE Journal of Solid-State Circuits.