Sensitivity analysis of the control of a three-phase open-end winding H-bridge drive
暂无分享,去创建一个
[1] Paul Sandulescu. Modélisation et commande d’un système à trois phases indépendantes à double fonctionnalité : Traction Électrique et Chargeur Forte Puissance pour application automobile , 2013 .
[2] Hyun-Soo Kim,et al. On-line dead-time compensation method based on time delay control , 2003, IEEE Trans. Control. Syst. Technol..
[3] Fabien Meinguet,et al. Control Strategies for Open-End Winding Drives Operating in the Flux-Weakening Region , 2014, IEEE Transactions on Power Electronics.
[4] M. Jones,et al. A Dual Five-Phase Space-Vector Modulation Algorithm Based on the Decomposition Method , 2012, IEEE Transactions on Industry Applications.
[5] T.A. Lipo,et al. On-line dead time compensation technique for open-loop PWM-VSI drives , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.
[6] Martin Jones,et al. Investigation of Carrier-Based PWM Techniques for a Five-Phase Open-End Winding Drive Topology , 2013, IEEE Transactions on Industrial Electronics.
[7] Xavier Kestelyn,et al. A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time , 2011, IEEE Transactions on Industrial Electronics.
[8] P. Sandulescu,et al. FPGA implementation of a general Space Vector approach on a 6-leg voltage source inverter , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.
[9] Farhat Fnaiech,et al. An Efficient DSP-FPGA-Based Real-Time Implementation Method of SVM Algorithms for an Indirect Matrix Converter , 2011, IEEE Transactions on Industrial Electronics.