Characterization of Polyester Nanocomposites Reinforced with Conifer Fiber Cellulose Nanocrystals

The application of cellulose nanocrystal has lately been investigated as polymer composites reinforcement owing to favorable characteristics of biodegradability and cost effectiveness as well as superior mechanical properties. In the present work novel nanocomposites of unsaturated polyester matrix reinforced with low amount of 1, 2, and 3 wt% of cellulose nanocrystals obtained from conifer fiber (CNC) were characterized. The polyester matrix and nanocomposites were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), bending test, and thermogravimetric analysis (TGA). The result showed that the addition of only 2 wt% CNC increased the nanocomposite flexural strength by 159%, the ductility by 500% and the toughness by 1420%. Fracture analyses by SEM revealed a uniform participation of the CNC in the polyester microstructure. The resistance to thermal degradation of the CNC reinforced nanocomposites was improved in more than 20 °C as compared to neat polyester. No significant changes were detected in the water absorptions and XRD pattern of the neat polyester with incorporations up to 3 wt% CNC. These results reveal that the 2 wt% CNC nanocomposite might be a promising more ductile, lightweight and cost-effective substitute for conventional glass fiber composites in engineering applications.

[1]  S. Monteiro,et al.  Promising Mechanical, Thermal, and Ballistic Properties of Novel Epoxy Composites Reinforced with Cyperus malaccensis Sedge Fiber , 2020, Polymers.

[2]  S. Monteiro,et al.  Graphene-Incorporated Natural Fiber Polymer Composites: A First Overview , 2020, Polymers.

[3]  A. Bezazi,et al.  Hybrid Polyester Composites Reinforced with Curauá Fibres and Nanoclays , 2020, Fibers and Polymers.

[4]  M. Zeeshan,et al.  Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite , 2019, Cellulose.

[5]  D. Kalita,et al.  Synthesis and Performance Evaluation of Unsaturated Polyester Blends of Resins and Its Application on Non-woven/Fabric Jute Fibers Reinforced Composites , 2019, Journal of Polymers and the Environment.

[6]  Hossein Mohammad Khanlou,et al.  Environmental effects on the durability and the mechanical performance of flax fiber/bio-epoxy composites , 2019, Composites Part B: Engineering.

[7]  R. Moon,et al.  Freeze dried cellulose nanocrystal reinforced unsaturated polyester composites: challenges and potential , 2019, Cellulose.

[8]  J. Cabibihan,et al.  Synthesis, optimization and applications of ZnO/polymer nanocomposites. , 2019, Materials science & engineering. C, Materials for biological applications.

[9]  B. F. Yousif,et al.  Toughening of brittle polyester with functionalized halloysite nanocomposites , 2019, Composites Part B: Engineering.

[10]  R. A. Ilyas,et al.  Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites. , 2018, Carbohydrate polymers.

[11]  D. Pasquini,et al.  Nanocomposite Films Based on Flaxseed Gum and Cellulose Nanocrystals , 2018, Materials Research.

[12]  Yasser S. Mohamed,et al.  Fatigue and tensile behaviors of fiber-reinforced thermosetting composites embedded with nanoparticles , 2018, Journal of Composite Materials.

[13]  D. Bajwa,et al.  Green esterification: a new approach to improve thermal and mechanical properties of poly(lactic acid) composites reinforced by cellulose nanocrystals , 2018 .

[14]  M. Gupta,et al.  PLA-coated sisal fibre-reinforced polyester composite: Water absorption, static and dynamic mechanical properties , 2018, Journal of Composite Materials.

[15]  P. Dubois,et al.  Effect of the addition of polyester-grafted-cellulose nanocrystals on the shape memory properties of biodegradable PLA/PCL nanocomposites , 2018, Polymer Degradation and Stability.

[16]  A. Hanif,et al.  Thermal, mechanical, and surface properties of poly(vinyl alcohol) (PVA) polymer modified cementitious composites for sustainable development , 2018 .

[17]  Subair Naduparambath,et al.  Isolation and characterisation of cellulose nanocrystals from sago seed shells. , 2018, Carbohydrate polymers.

[18]  D. N. Trivedi,et al.  Mechanical Characterization and Vibration Analysis of Hybrid E-glass/Bagasse Fiber Polyester Composites , 2018 .

[19]  Zongjin Li,et al.  Mechanical behavior of thin-laminated cementitious composites incorporating cenosphere fillers , 2018 .

[20]  G. Martínez-Barrera,et al.  Recycled cellulose from Tetra Pak packaging as reinforcement of polyester based composites , 2017 .

[21]  T. Kang,et al.  Cellulose long fibers fabricated from cellulose nanofibers and its strong and tough characteristics , 2017, Scientific Reports.

[22]  R. Qiu,et al.  Preparation and Evaluation of Green Composites from Microcrystalline Cellulose and a Soybean-Oil Derivative , 2017, Polymers.

[23]  Anna Carolina Cerqueira Neves,et al.  Thermogravimetric characterization of polyester matrix composites reinforced with eucalyptus fibers , 2017 .

[24]  Zongjin Li,et al.  Green lightweight ferrocement incorporating fly ash cenosphere based fibrous mortar matrix , 2017 .

[25]  Ravindra Kommineni,et al.  Extraction of cellulose from pistachio shell and physical and mechanical characterisation of cellulose-based nanocomposites , 2017 .

[26]  K. Sadasivuni,et al.  Eeonomer 200F®: A High-Performance Nanofiller for Polymer Reinforcement—Investigation of the Structure, Morphology and Dielectric Properties of Polyvinyl Alcohol/Eeonomer-200F® Nanocomposites for Embedded Capacitor Applications , 2017, Journal of Electronic Materials.

[27]  W. Hamad,et al.  In-situ polymerized cellulose nanocrystals (CNC)-poly(l-lactide) (PLLA) nanomaterials and applications in nanocomposite processing. , 2016, Carbohydrate polymers.

[28]  R. Moon,et al.  Introducing cellulose nanocrystals in sheet molding compounds (SMC) , 2016 .

[29]  R. Santana,et al.  Thermal degradation behavior of cellulose nanofibers and nanowhiskers , 2016, Journal of Thermal Analysis and Calorimetry.

[30]  Q. Zhang,et al.  Facile preparation and separation performances of cellulose nanofibrous membranes , 2016 .

[31]  L. Souza,et al.  Production and Characterization of Polymeric Composite Materials Using MDF Waste in Powder and Poliester Terephthalic Resin , 2015 .

[32]  M. Mozetič,et al.  Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study , 2015, Cellulose.

[33]  A. Dufresne,et al.  Cellulose nanocrystal: A promising toughening agent for unsaturated polyester nanocomposite , 2015 .

[34]  A. Retegi,et al.  A common strategy to extracting cellulose nanoentities from different plants , 2014 .

[35]  S. Monteiro,et al.  Dynamic-Mechanical Behavior of Malva Fiber Reinforced Polyester Matrix Composites , 2014 .

[36]  F. V. Pereira,et al.  Bio-based nanocomposites obtained by incorporation of cellulose nanocrystals into biodegradable polymers through casting, layer-by-layer or electrospinning methods , 2014 .

[37]  Z. Cai,et al.  Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity , 2013, Cellulose.

[38]  Nurain Johar,et al.  MORPHOLOGICAL, THERMAL, AND MECHANICAL PROPERTIES OF STARCH BIOCOMPOSITE FILMS REINFORCED BY CELLULOSE NANOCRYSTALS FROM RICE HUSKS , 2012 .

[39]  L. S. Gal′braikh,et al.  Some observations on obtaining cellulose nanocrystals , 2012, Fibre Chemistry.

[40]  N. Ghosh,et al.  Chapter 37 – Preparation of Polybenzoxazine-Ni-Zn Ferrite Nanocomposites and Their Magnetic Property , 2011 .

[41]  Anupama Kaushik,et al.  Green nanocomposites based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw , 2010 .

[42]  Z. Ishak,et al.  Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites , 2009 .

[43]  Seung‐Hwan Lee,et al.  Physical and mechanical properties of polyvinyl alcohol and polypropylene composite materials reinforced with fibril aggregates isolated from regenerated cellulose fibers , 2007 .

[44]  S. Moradian,et al.  Cure characterization of epoxy and polyester clear powder coatings using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Thermal Analysis (DMTA) , 2005 .

[45]  M. Skłodowskiej-Curie.  Applying the WAXS method to estimate the supermolecular structure of cellulose fibres after mercerisation , 2003 .

[46]  P. Kiekens,et al.  Thermal degradation of flax: The determination of kinetic parameters with thermogravimetric analysis , 2002 .

[47]  L. Segal',et al.  An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer , 1959 .