High-efficiency inverted polymer solar cells controlled by the thickness of polyethylenimine ethoxylated (PEIE) interfacial layers.

In this work, we investigate the effect of the thickness of the polyethylenimine ethoxylated (PEIE) interface layer on the performance of two types of polymer solar cells based on inverted poly(3-hexylthiophene) (P3HT):phenyl C61-butryric acid methyl ester (PCBM) and thieno[3,4-b]thiophene/benzodithiophene (PTB7):[6,6]-phenyl C71-butyric acid methyl ester (PC71BM). Maximum power conversion efficiencies of 4.18% and 7.40% were achieved at a 5.02 nm thick PEIE interface layer, for the above-mentioned solar cell types, respectively. The optimized PEIE layer provides a strong enough dipole for the best charge collection while maintaining charge tunneling ability. Optical transmittance and atomic force microscopy measurements indicate that all PEIE films have the same high transmittance and smooth surface morphology, ruling out the influence of the PEIE layer on these two parameters. The measured external quantum efficiencies for the devices with thick PEIE layers are quite similar to those of the optimized devices, indicating the poor charge collection ability of thick PEIE layers. The relatively low performance of devices with a PEIE layer of thickness less than 5 nm is the result of a weak dipole and partial coverage of the PEIE layer on ITO.

[1]  Junbiao Peng,et al.  Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT:PSS as the hole transport layer. , 2014, ACS applied materials & interfaces.

[2]  W. Choi,et al.  Inverted CdSe–ZnS quantum dots light-emitting diode using low-work function organic material polyethylenimine ethoxylated , 2014 .

[3]  Wenjun Zhang,et al.  Improving efficiency by hybrid TiO(2) nanorods with 1,10-phenanthroline as a cathode buffer layer for inverted organic solar cells. , 2014, ACS applied materials & interfaces.

[4]  E. Saracco,et al.  Work Function Tuning for High‐Performance Solution‐Processed Organic Photodetectors with Inverted Structure , 2013, Advanced materials.

[5]  S. Ramakrishna,et al.  Simultaneous improvements in power conversion efficiency and operational stability of polymer solar cells by interfacial engineering. , 2013, Physical chemistry chemical physics : PCCP.

[6]  T. Xiao,et al.  Improved efficiency and stability of inverted polymer solar cells with a solution-processed BPhen interlayer and polystyrene beads , 2013 .

[7]  R. Muller,et al.  Room temperature solution-processed electron transport layer for organic solar cells , 2013 .

[8]  M. J. Tan,et al.  Biopolymer as an electron selective layer for inverted polymer solar cells , 2013 .

[9]  Young-Bum Kim,et al.  Clusterin and LRP2 are critical components of the hypothalamic feeding regulatory pathway , 2013, Nature Communications.

[10]  Jian Wang,et al.  Intensity and Wavelength Dependence of Bimolecular Recombination in P3HT:PCBM Solar Cells: A White-Light Biased External Quantum Efficiency Study , 2013 .

[11]  彭飞,et al.  点铁成金——纳米让金属更耐磨 Turn Iron into Gold by Touching—To Improve the Wear Resistance of Metallic Materials by Nano-Modification , 2013 .

[12]  J. Shim,et al.  Studies of the optimization of recombination layers for inverted tandem polymer solar cells , 2012 .

[13]  Bernard Kippelen,et al.  High performance polymeric charge recombination layer for organic tandem solar cells , 2012 .

[14]  P. Müller‐Buschbaum,et al.  Efficiency-improved organic solar cells based on plasticizer assisted soft embossed PEDOT:PSS layers. , 2012, Physical chemistry chemical physics : PCCP.

[15]  J. Pflaum,et al.  Thickness dependent effects of an intermediate molecular blocking layer on the optoelectronic characteristics of organic bilayer photovoltaic cells , 2012, 1207.1179.

[16]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[17]  M. Wienk,et al.  Quantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells , 2011, Advanced materials.

[18]  Mikkel Jørgensen,et al.  ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules , 2011 .

[19]  Alex K.-Y. Jen,et al.  A Review on the Development of the Inverted Polymer Solar Cell Architecture , 2010 .

[20]  William J. Potscavage,et al.  Electrical and Optical Properties of ZnO Processed by Atomic Layer Deposition in Inverted Polymer Solar Cells , 2010 .

[21]  Alex K.-Y. Jen,et al.  Efficient Polymer Solar Cells Based on the Copolymers of Benzodithiophene and Thienopyrroledione , 2010 .

[22]  Yong Cao,et al.  Polymer solar cells: Recent development and possible routes for improvement in the performance , 2010 .

[23]  Srinivas Sista,et al.  Efficient Polymer Solar Cells with Thin Active Layers Based on Alternating Polyfluorene Copolymer/Fullerene Bulk Heterojunctions , 2009 .

[24]  C. M. Li,et al.  Abnormally high photocurrent of a degraded organic solar cell under chopped light , 2009 .

[25]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[26]  R. Liu,et al.  Degradation of organic solar cells studied by displacement current , 2009 .

[27]  Amy M. Ballantyne,et al.  Effects of thickness and thermal annealing of the PEDOT:PSS layer on the performance of polymer solar cells , 2009 .

[28]  Dongge Ma,et al.  A soluble nonionic surfactant as electron injection material for high-efficiency inverted bottom-emission organic light emitting diodes , 2008 .

[29]  Valentin D. Mihailetchi,et al.  Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells , 2007 .

[30]  A. Facchetti,et al.  High-performance transparent inorganic–organic hybrid thin-film n-type transistors , 2006, Nature materials.

[31]  Gang Li,et al.  Accurate Measurement and Characterization of Organic Solar Cells , 2006 .

[32]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[33]  Gerhard Gobsch,et al.  Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene , 2004 .

[34]  Zhiqiang Gao,et al.  Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer , 2002 .