Effects of free-end corner shape on flow structure around a finite cylinder

Abstract The flow structure around the free end of a finite circular cylinder embedded in an atmospheric boundary layer (ABL) over open terrain was investigated experimentally by modifying the free-end corner shape. The experiments were carried out in a closed-return subsonic wind tunnel. A finite cylinder (FC) with an aspect ratio (height/diameter) of 6 was mounted vertically on a long flat plate. The velocity fields near the FC free end were measured using the single-frame double-exposure PIV (particle image velocimetry) method. The Reynolds number based on cylinder diameter for the PIV measurements was about Re=7500. A hot-wire anemometer was employed to analyze the spectral characteristics of the wake structure. As a result, for the FC with a right-angled flat-tip free end, there is a strong vortical structure showing counter-rotating twin vortices near the FC free end. It is caused by the interaction between the entrained ambient fluids from both sides of the FC and the downwash flow from the FC free end. Due to the descending separated shear flow from the FC free end, regular vortex shedding from the cylinder seems to be suppressed and the vortex formation region is barely noticeable in the region near the FC free end, irrespective of free-end edge shape. For the case of the flat-tip free-end FC, the separated shear flow has a stronger downwash compared to the radiussed-tip free-end FC, reducing the size of the recirculation bubble in the near-wake region.

[1]  Cheol Woo Park,et al.  Flow structure around a finite circular cylinder embedded in various atmospheric boundary layers , 2002 .

[2]  Peter W. Bearman,et al.  Aspect ratio and end plate effects on vortex shedding from a circular cylinder , 1992, Journal of Fluid Mechanics.

[3]  T. Fox,et al.  The aerodynamic disturbance caused by the free-ends of a circular cylinder immersed in a uniform flow , 1993 .

[4]  J. Gerrard,et al.  An experimental investigation of the end effects on the wake of a circular cylinder towed through water at low Reynolds numbers , 1981, Journal of Fluid Mechanics.

[5]  Sang Joon Lee,et al.  Velocity Field Measurements of Flow inside Snout of Continuous Hot-Dip Galvanizing Process Using a Single-frame PIV Technique , 2000 .

[6]  Cheol Woo Park,et al.  Free end effects on the near wake flow structure behind a finite circular cylinder , 2000 .

[7]  C. Williamson.  Oblique and parallel modes of vortex shedding in the wake of a circular cylinder at low Reynolds numbers , 1989, Journal of Fluid Mechanics.

[8]  Yozo Fujino,et al.  EFFECTS OF FREE-END CONDITION ON END-CELL-INDUCED VIBRATION , 1999 .

[9]  Yasushi Uematsu,et al.  Some effects of free-stream turbulence on the flow past a cantilevered circular cylinder , 1988 .

[10]  R. So,et al.  Aspect ratio effect on flow-induced forces on circular cylinders in a cross-flow , 1991 .

[11]  Yukisada Sunabashiri,et al.  Vortex Shedding From a Circular Cylinder of Finite Length Placed on a Ground Plane , 1992 .

[12]  D. .. Farivar,et al.  Turbulent uniform flow around cylinders of finite length , 1981 .

[13]  D. Rockwell,et al.  Control of vortex formation from a vertical cylinder in shallow water: Effect of localized roughness elements , 2002 .

[14]  C. Apelt,et al.  The effects of tunnel blockage and aspect ratio on the mean flow past a circular cylinder with Reynolds numbers between 104 and 105 , 1982, Journal of Fluid Mechanics.

[15]  R. Adrian.  Particle-Imaging Techniques for Experimental Fluid Mechanics , 1991 .

[16]  Peter W. Bearman,et al.  The interaction between a pair of circular cylinders normal to a stream , 1973, Journal of Fluid Mechanics.

[17]  A. Roshko,et al.  On density effects and large structure in turbulent mixing layers , 1974, Journal of Fluid Mechanics.

[18]  I. P. Castro,et al.  The structure of a turbulent shear layer bounding a separation region , 1987, Journal of Fluid Mechanics.