An estimation of the diffusivity of silica fume concrete

Deterioration and durability of concrete structures mainly depend on diffusivity and permeability of concrete. Silica fume (SF) influences concrete diffusivity in several ways. As a mineral admixture for high performance concrete, SF develops diffusivity and permeability of concrete as well as strength by densifying the microstructure of interfacial transition zone (ITZ) of concrete and by producing less diffusible and less permeable pozzolanic CSH gel than conventional CSH gel of normal concrete during cement hydration and also reducing the overall (bulk and ITZ) capillary porosity for fixed degree of cement hydration. Based on a microstructure model, a procedure for predicting the diffusivity of high strength SF concrete is developed by considering water-to-binder ratio, SF replacement ratio, and degree of hydration as major influencing factors. Results of the diffusivity calculated using the procedure is verified with results of several experiments. Subsequently, effects of SF on the diffusivity of concrete are evaluated. Finally, an optimum SF replacement ratio which can reduce reasonable diffusivity of concrete is proposed for durable concrete.

[1]  Dale P. Bentz,et al.  Prediction of Adiabatic Temperature Rise in Conventional and High-Performance Concretes Using a 3-D Microstructural Model , 1998 .

[2]  J. Beaudoin,et al.  Modification of transition zone microstructure-silica fume coating of aggregate surfaces , 1992 .

[3]  N. S. Berke,et al.  Use of Concrete Admixtures to Provide Long-Term Durability From Steel Corrosion , 1989 .

[4]  R. Hooton.  INFLUENCE OF SILICA FUME REPLACEMENT OF CEMENT ON PHYSICAL PROPERTIES AND RESISTANCE TO SULFATE ATTACK, FREEZING AND THAWING, AND ALKALI-SILICA REACTIVITY , 1993 .

[5]  A. K. Suryavanshi,et al.  Influence of aggregate fraction in the mix on the reliability of the rapid chloride permeability test , 1999 .

[6]  Dale P. Bentz,et al.  Influence of silica fume on diffusivity in cement-based materials: I. Experimental and computer modeling studies on cement pastes , 2000 .

[7]  B. B. Sabir,et al.  High-strength condensed silica fume concrete , 1995 .

[8]  Safwan A. Khedr,et al.  Characteristics of Silica‐Fume Concrete , 1994 .

[9]  R. D. Hooton,et al.  Influence of Binder Composition on Chloride Penetration Resistance of Concrete , 1997, SP-170: Fourth CANMET/ACI International Conference on Durability of Concrete.

[10]  Dale P. Bentz,et al.  Influence of silica fume on diffusivity in cement-based materials: II. Multi-scale modeling of concrete diffusivity , 2000 .

[11]  Pierre Che Ho Pun,et al.  Influence of silica fume on chloride resistance of concrete , 1997 .

[12]  Arnon Bentur,et al.  The influence of microfillers on enhancement of concrete strength , 1993 .

[13]  F. Zhou,et al.  Fracture properties of high strength concrete with varying silica fume content and aggregates , 1995 .

[14]  Ramon L. Carrasquillo,et al.  HIGH-PERFORMANCE CONCRETE: INFLUENCE OF COARSE AGGREGATES ON MECHANICAL PROPERTIES , 1998 .

[15]  P. Freiesleben Hansen,et al.  AUTOGENOUS DEFORMATION AND CHANGE OF THE RELATIVE HUMIDITY IN SILICA FUME-MODIFIED CEMENT PASTE , 1996 .

[16]  H. Toutanji,et al.  Effect of curing procedures on properties of silica fume concrete , 1999 .

[17]  B. W. Langan,et al.  Silica Fume in High-Strength Concrete , 1987 .

[18]  R. P. Khatri,et al.  EFFECT OF DIFFERENT SUPPLEMENTARY CEMENTITIOUS MATERIALS ON MECHANICAL PROPERTIES OF HIGH PERFORMANCE CONCRETE , 1995 .

[19]  E. Garboczi,et al.  New Effective Medium Theory for the Diffusivity or Conductivity of a Multi-Scale Concrete Microstructure Model | NIST , 2000 .

[20]  Edward J. Garboczi,et al.  Percolation of phases in a three-dimensional cement paste microstructural model , 1991 .