论文信息 - A study of transmission mode conversion miter-bend for EC H&CD transmission line

A study of transmission mode conversion miter-bend for EC H&CD transmission line

A mode conversion miter-bend with angle controllable mirror was developed. By changing mirror angle, RF beam angle in the miter bend is controlled and transmission mode contents (LP01 and LP11 modes) are controlled. The miter bend was tested at 170 GHz mW-class low power RF system. The dependence of miter bend mirror angle and ratio of LP01 and LP11 modes was acquired. The concept of mode conversion system was validated.

[1] Richard J. Temkin,et al. Simple Correctors for Elimination of High-Order Modes in Corrugated Waveguide Transmission Lines , 2014, IEEE Transactions on Plasma Science.

[2] N. Kobayashi,et al. Design of a high power millimeter wave launcher for EC H&CD system on ITER , 2009 .

[3] J. Doane. Design of Circular Corrugated Waveguides to Transmit Millimeter Waves at ITER , 2008 .

[4] N. Kobayashi,et al. Progress on Design and Development of ITER Equatorial Launcher: Analytical Investigation and R&D of the Launcher Components for the Design Improvement , 2007 .

[5] M. A. Shapiro,et al. The EC H&CD Transmission Line for ITER , 2011 .

[6] K Kajiwara,et al. High power millimeter wave experiment of ITER relevant electron cyclotron heating and current drive system. , 2011, The Review of scientific instruments.

[7] C. Moeller,et al. ECH MW-level CW transmission line components suitable for ITER , 2005 .

[8] M. Shapiro,et al. Loss Estimate for ITER ECH Transmission Line Including Multimode Propagation , 2010 .

[9] Yasuhisa Oda,et al. Measurement of RF Transmission Mode in ITER Relevant EC H&CD Transmission Line , 2010 .

[10] Faa Federico Felici,et al. Progress on the ITER Upper Launcher Millimeter-Wave Design and Testing , 2009 .